TightVNC problem

[Jane]

My OpenVPN client connects to OpenVPN server but I would like to use TightVNC so that I can control the server from my client.Is that possible?
Here is the conversation between client and server

56-SHA, 1024 bit RSA
Mon Nov 14 08:54:13 2011 [TEST1] Peer Connection Initiated with 88.80.57.39:1194

Mon Nov 14 08:54:15 2011 SENT CONTROL [TEST1]: 'PUSH_REQUEST' (status=1)
Mon Nov 14 08:54:15 2011 PUSH: Received control message: 'PUSH_REPLY,route 10.8.
0.1,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5'
Mon Nov 14 08:54:15 2011 OPTIONS IMPORT: timers and/or timeouts modified
Mon Nov 14 08:54:15 2011 OPTIONS IMPORT: --ifconfig/up options modified
Mon Nov 14 08:54:15 2011 OPTIONS IMPORT: route options modified
Mon Nov 14 08:54:15 2011 ROUTE default_gateway=192.168.2.1
Mon Nov 14 08:54:15 2011 TAP-WIN32 device [ SERVERVPN] opened: \\.\Global\{089C8
607-A347-4A65-A8EE-16FC725600CE}.tap
Mon Nov 14 08:54:15 2011 TAP-Win32 Driver Version 9.8
Mon Nov 14 08:54:15 2011 TAP-Win32 MTU=1500
Mon Nov 14 08:54:15 2011 Notified TAP-Win32 driver to set a DHCP IP/netmask of 1
0.8.0.6/255.255.255.252 on interface {089C8607-A347-4A65-A8EE-16FC725600CE} [DHC
P-serv: 10.8.0.5, lease-time: 31536000]
Mon Nov 14 08:54:15 2011 Successful ARP Flush on interface [3] {089C8607-A347-4A
65-A8EE-16FC725600CE}
Mon Nov 14 08:54:21 2011 TEST ROUTES: 1/1 succeeded len=1 ret=1 a=0 u/d=up
Mon Nov 14 08:54:21 2011 C:\WINDOWS\system32\route.exe ADD 10.8.0.1 MASK 255.255
.255.255 10.8.0.5
Mon Nov 14 08:54:21 2011 Route addition via IPAPI succeeded [adaptive]
Mon Nov 14 08:54:21 2011 Initialization Sequence Completed

But I can not start TightVNC.
What IP address must I use to connect to TightVNC that runs on the OpenVPN server?
Can anyone help please?
Thanks

[george]

You should be able to use either the VPN server endpoint IP, (looks like 10.8.0.1 from your logs), or to the internal LAN IP.