I am new to this whole network VPN thing.
I am a road warrior trying to get access to my home network. I setup OpenVPN Access Server as virtual appliance running on my home VMware ESXi server. I got everything configured (mostly through trial and error) such that I can connect via Tunnelblick to my VPN.
When I connect I get a 5.5.X.X ip address. Once connected, I can't ping or access any of my servers that are running on my private network (192.168.0.X addresses). I have the routing configured in OpenVPN as NAT and in the settings that say "Specify the private subnets to which all clients should be given access (as 'network/netmask_bits', one per line):", I have 192.168.0.0/16.
What am I missing here? I've been struggling with this for hours and my network background is "advanced home user" at best...
problem connecting to private network..
Moderators: TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech
Forum rules
Please use the [oconf] BB tag for openvpn Configurations. See viewtopic.php?f=30&t=21589 for an example.
Please use the [oconf] BB tag for openvpn Configurations. See viewtopic.php?f=30&t=21589 for an example.
-
djseto
- OpenVpn Newbie
- Posts: 1
- Joined: Fri May 06, 2011 10:20 pm
-
janjust
- Forum Team
- Posts: 2703
- Joined: Fri Aug 20, 2010 2:57 pm
- Location: Amsterdam
- Contact:
Re: problem connecting to private network..
as you're using OpenVPN Access Server I will have to redirect you to their tech support ; this forum is only for the open source (community) version of OpenVPN.