Layer 2 Problem (Layer 3 works)

This forum is for admins who are looking to build or expand their OpenVPN setup.

Moderators: TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech

Forum rules
Please use the [oconf] BB tag for openvpn Configurations. See viewtopic.php?f=30&t=21589 for an example.
Post Reply
solero
OpenVpn Newbie
Posts: 1
Joined: Sat Jan 15, 2011 10:10 am

Layer 2 Problem (Layer 3 works)

Post by solero » Sat Jan 15, 2011 10:20 am

Hello everybody

First: OpenVPN is a great product ;)

Here a description of my problem: I run a configuration with Layer 3 (Routing). It works with no problem. But I have to test the Layer 2 (NAT) for VMware VIEW. So I changed to NAT and i got an IP address from my DHCP. I also can ping my access Server, but only the access server. No other machine in my environment. I have tested a lot of things, but I didn't get it. Have you any ideas?

Here some information about my config:

DHCP IP: 192.168.100.21 <-> DG: 192.168.100.21 <-> WAN Interface 192.168.1.100 <-> ISP Modem 192.168.1.1 <-> Public IP
Access Server 192.168.100.24
IP Pool 192.168.100.50-60

NetMask 255.255.255.0

Thank you for your inputs.

Nice regards
Solero
Top
User avatar
krzee
Forum Team
Posts: 728
Joined: Fri Aug 29, 2008 5:42 pm

Re: Layer 2 Problem (Layer 3 works)

Post by krzee » Sat Jan 15, 2011 10:23 am

sorry man you're in the wrong place
topic7036.html
access-server comes with professional support, this is the forum for the community version
Top
Post Reply

Return to “Server Administration”