Hi to all,
I am trying to configure a Windows server to auto reconnect after Windows reboot to an OpenVPN server based on the OpenVPNService.
While the config works successfully via the manual OpenVPN-GUI way (client asks for first time for username & password, stores it, reuses it later), I seem to struggle to provide the proper username / password information to the OpenVPNService to successfully start the connection with the same ovpn file. Following my client configuration (sensitive data sanitized):
dev tun
client
cipher AES-256-CBC
auth SHA512
auth-nocache
nobind
verb 6
max-routes 38
route-delay 2
remote-cert-tls server
tls-version-min 1.2
auth-user-pass pass.loggin
<connection>
remote x.x.x.x 1194 udp
</connection>
<connection>
remote FQDN 1194 udp
</connection>
<connection>
remote x.x.x.x 5443 tcp
</connection>
<connection>
remote FQDN 5443 tcp
</connection>
<pkcs12>
[certificate text]
</pkcs12>
The pass.loggin includes username and password for the OpenVPN user.
Is it possible that auto relogin via PKCS12 containing opvn files is not supported yet? What exactly do I potentially do wrong?
Any hint to get this to work is highly appreciated.
Thanks a ton for your support.
Benjamin
How to get manually functioning client.opvn to work with config-auto / OpenVPNService?
Moderators: TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech
-
- OpenVpn Newbie
- Posts: 1
- Joined: Mon May 16, 2022 1:45 pm
-
- OpenVPN Protagonist
- Posts: 11138
- Joined: Fri Jun 03, 2016 1:17 pm
Re: How to get manually functioning client.opvn to work with config-auto / OpenVPNService?
Will forget the user/pass at reconnect, you probably do not want this.
Otherwise, log file at --verb 4.