Hey guys,
i just had to restore our Windows 7 OpenVPN Machine. (Runs on a ESXi Host)
Since i did that the Network bridge is not workin.
Ive got 1 LAN and 1 TAP adapter, they are bridged.
The bridge shows me that my network can not be identified (Static IP).
i just removed the bridge to see if the LAN adapter works, it does.(Static und DHCP)
How do i have to configure my Network Adapters to makes this work again?
TAP-Adapter
Moderators: TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech
Forum rules
Please visit (and READ) the OpenVPN HowTo http://openvpn.net/howto prior to asking any questions in here!
Please visit (and READ) the OpenVPN HowTo http://openvpn.net/howto prior to asking any questions in here!
-
Traffic
- OpenVPN Protagonist
- Posts: 4066
- Joined: Sat Aug 09, 2014 11:24 am
Re: TAP-Adapter
No configs .. no logs .. crystal ball time ..
Determining whether to use a routed or bridged VPN
Ethernet Bridging
Don't forget the gateway for your new bridge.
Determining whether to use a routed or bridged VPN
Ethernet Bridging
Don't forget the gateway for your new bridge.