OpenVPN Connect Windows

Business solution to host your own OpenVPN server with web management interface and bundled clients.
Post Reply
Muzdrav
OpenVpn Newbie
Posts: 10
Joined: Tue Dec 08, 2020 2:26 pm

OpenVPN Connect Windows

Post by Muzdrav » Tue Dec 08, 2020 2:39 pm

Hello,
my apologizes for writing this under Android, but I couldn't find OpenVPN Connect Windows.

I'm just learning from the beginning and see, you mostly speak about OpenVPN server, but I have bought a TP-Link Archer C2300 v2.0, which has built-in OpenVPN function, to which I can connect to with OpenVPN Connect.
My upload is 10mb/s, download is 40mb/s (on both sides), but I can get only 50 - 300kbit out of the connection. All I need is at least 2mb/s for one bookeeping program.
I'm trying to make it faster for a month and a half (TCP, UDP, dozens of ports (allows only 1024 - 65535), but without succsess.
Do you think there is a problem somewhere, or is this all I can get? I contacted even TP-link support, they said the router's OpenVPN can make 10mb/s with no problem. The router is connected right to the satelite of the internet provider. Also, it is strange, that when I connect to OPENVPN on the home's lan, when I'm inside my house, the speed is the same (50 - 500kb/s).
Do you think anybode could help me?
Thank you.
Regards
M.
Top
TinCanTech
OpenVPN Protagonist
Posts: 11139
Joined: Fri Jun 03, 2016 1:17 pm

Re: OpenVPN Connect Windows

Post by TinCanTech » Tue Dec 08, 2020 4:27 pm

Don't use Openvpn-Connect ..
Top
Muzdrav
OpenVpn Newbie
Posts: 10
Joined: Tue Dec 08, 2020 2:26 pm

Re: OpenVPN Connect Windows

Post by Muzdrav » Tue Dec 08, 2020 6:18 pm

TinCanTech wrote: ↑
Tue Dec 08, 2020 4:27 pm
 Don't use Openvpn-Connect ..
Tried OpenVPN GUI, with the same result. Or did you mean I should build a OpenVPN server on a computer without windows?
Last edited by Muzdrav on Tue Dec 08, 2020 6:33 pm, edited 1 time in total.
Top
User avatar
Pippin
Forum Team
Posts: 1201
Joined: Wed Jul 01, 2015 8:03 am
Location: irc://irc.libera.chat:6697/openvpn

Re: OpenVPN Connect Windows

Post by Pippin » Tue Dec 08, 2020 6:25 pm

You misunderstand (or maybe we do?).

Don't use OpenVPN Connect Windows but download the Windows installer from here:
https://openvpn.net/community-downloads
I gloomily came to the ironic conclusion that if you take a highly intelligent person and give them the best possible, elite education, then you will most likely wind up with an academic who is completely impervious to reality.
Halton Arp
Top
TinCanTech
OpenVPN Protagonist
Posts: 11139
Joined: Fri Jun 03, 2016 1:17 pm

Re: OpenVPN Connect Windows

Post by TinCanTech » Tue Dec 08, 2020 6:41 pm

https://community.openvpn.net/openvpn/wiki/HOWTO
Top
Muzdrav
OpenVpn Newbie
Posts: 10
Joined: Tue Dec 08, 2020 2:26 pm

Re: OpenVPN Connect Windows

Post by Muzdrav » Wed Dec 09, 2020 4:39 am

Pippin wrote: ↑
Tue Dec 08, 2020 6:25 pm
 Don't use OpenVPN Connect Windows but download the Windows installer from here:
https://openvpn.net/community-downloads-2/
I tried it, the connection is still only 250kb/s. Do you think the TP-LINK is simply that slow?
Top
TinCanTech
OpenVPN Protagonist
Posts: 11139
Joined: Fri Jun 03, 2016 1:17 pm

Re: OpenVPN Connect Windows

Post by TinCanTech » Wed Dec 09, 2020 5:24 am

Muzdrav wrote: ↑
Tue Dec 08, 2020 2:39 pm
 The router is connected right to the satelite of the internet provider
I suspect this is the issue.
Top
Muzdrav
OpenVpn Newbie
Posts: 10
Joined: Tue Dec 08, 2020 2:26 pm

Re: OpenVPN Connect Windows

Post by Muzdrav » Wed Dec 09, 2020 7:47 am

TinCanTech wrote: ↑
Wed Dec 09, 2020 5:24 am
Muzdrav wrote: ↑
Tue Dec 08, 2020 2:39 pm
 The router is connected right to the satelite of the internet provider
I suspect this is the issue.
Do you think I should use other router for the satelite and then connect OpenVPN router to it? There would be much more forwarding.
Im connecting to my public IP, which is then forwarded to my OpenVPN router.
Top
TinCanTech
OpenVPN Protagonist
Posts: 11139
Joined: Fri Jun 03, 2016 1:17 pm

Re: OpenVPN Connect Windows

Post by TinCanTech » Wed Dec 09, 2020 3:35 pm

You need to pay careful attention to your openvpn logs. There may be problems due to your network.

Set --verb 4 server and client and then check your logs for problems.
Top
Muzdrav
OpenVpn Newbie
Posts: 10
Joined: Tue Dec 08, 2020 2:26 pm

Re: OpenVPN Connect Windows

Post by Muzdrav » Wed Dec 09, 2020 7:58 pm

Code: Select all

Wed Dec 09 20:50:14 2020 WARNING: Compression for receiving enabled. Compression has been used in the past to break encryption. Sent packets are not compressed unless "allow-compression yes" is also set.
Wed Dec 09 20:50:14 2020 DEPRECATED OPTION: --cipher set to 'AES-128-CBC' but missing in --data-ciphers (AES-256-GCM:AES-128-GCM). Future OpenVPN version will ignore --cipher for cipher negotiations. Add 'AES-128-CBC' to --data-ciphers or change --cipher 'AES-128-CBC' to --data-ciphers-fallback 'AES-128-CBC' to silence this warning.
Wed Dec 09 20:50:14 2020 OpenVPN 2.5.0 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [LZ4] [PKCS11] [AEAD] built on Oct 28 2020
Wed Dec 09 20:50:14 2020 Windows version 10.0 (Windows 10 or greater) 64bit
Wed Dec 09 20:50:14 2020 library versions: OpenSSL 1.1.1h  22 Sep 2020, LZO 2.10
Wed Dec 09 20:50:15 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]82.234.85.251:49511
Wed Dec 09 20:50:15 2020 Attempting to establish TCP connection with [AF_INET]82.234.85.251:49511 [nonblock]
Wed Dec 09 20:50:24 2020 TCP connection established with [AF_INET]82.234.85.251:49511
Wed Dec 09 20:50:24 2020 TCP_CLIENT link local: (not bound)
Wed Dec 09 20:50:24 2020 TCP_CLIENT link remote: [AF_INET]82.234.85.251:49511
Wed Dec 09 20:50:25 2020 [server] Peer Connection Initiated with [AF_INET]82.234.85.251:49511
Wed Dec 09 20:50:27 2020 open_tun
Wed Dec 09 20:50:27 2020 tap-windows6 device [OpenVPN TAP-Windows6] opened
Wed Dec 09 20:50:27 2020 Notified TAP-Windows driver to set a DHCP IP/netmask of 191.149.0.6/255.255.255.252 on interface {F936F736-9F37-4E32-935C-2E3E4E1CFBE9} [DHCP-serv: 191.149.0.5, lease-time: 31536000]
Wed Dec 09 20:50:27 2020 Successful ARP Flush on interface [44] {F938D736-9F37-4A32-935C-2E3E4E1CFBE9}
Wed Dec 09 20:50:27 2020 IPv4 MTU set to 1500 on interface 44 using service
Wed Dec 09 20:50:32 2020 ROUTE: route addition failed using service: This object already exist. [status=5010 if_index=44]
Wed Dec 09 20:50:32 2020 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
Wed Dec 09 20:50:32 2020 Initialization Sequence Completed
Last edited by Pippin on Thu Dec 10, 2020 2:10 pm, edited 1 time in total.
Reason: Formatting
Top
TinCanTech
OpenVPN Protagonist
Posts: 11139
Joined: Fri Jun 03, 2016 1:17 pm

Re: OpenVPN Connect Windows

Post by TinCanTech » Wed Dec 09, 2020 8:35 pm

TinCanTech wrote: ↑
Wed Dec 09, 2020 3:35 pm
 You need to pay careful attention to your openvpn logs. There may be problems due to your network.

Set --verb 4 server and client and then check your logs for problems.
Once the VPN is up start a download or something and watch your log for problems.
Top
Muzdrav
OpenVpn Newbie
Posts: 10
Joined: Tue Dec 08, 2020 2:26 pm

Re: OpenVPN Connect Windows

Post by Muzdrav » Thu Dec 10, 2020 2:02 pm

Code: Select all

Thu Dec 10 14:54:56 2020   pkcs11_private_mode = 00000000
Thu Dec 10 14:54:56 2020   pkcs11_private_mode = 00000000
Thu Dec 10 14:54:56 2020   pkcs11_private_mode = 00000000
Thu Dec 10 14:54:56 2020   pkcs11_private_mode = 00000000
Thu Dec 10 14:54:56 2020   pkcs11_private_mode = 00000000
Thu Dec 10 14:54:56 2020   pkcs11_private_mode = 00000000
Thu Dec 10 14:54:56 2020   pkcs11_private_mode = 00000000
Thu Dec 10 14:54:56 2020   pkcs11_private_mode = 00000000
Thu Dec 10 14:54:56 2020   pkcs11_private_mode = 00000000
Thu Dec 10 14:54:56 2020   pkcs11_private_mode = 00000000
Thu Dec 10 14:54:56 2020   pkcs11_private_mode = 00000000
Thu Dec 10 14:54:56 2020   pkcs11_private_mode = 00000000
Thu Dec 10 14:54:56 2020   pkcs11_private_mode = 00000000
Thu Dec 10 14:54:56 2020   pkcs11_cert_private = DISABLED
Thu Dec 10 14:54:56 2020   pkcs11_cert_private = DISABLED
Thu Dec 10 14:54:56 2020   pkcs11_cert_private = DISABLED
Thu Dec 10 14:54:56 2020   pkcs11_cert_private = DISABLED
Thu Dec 10 14:54:56 2020   pkcs11_cert_private = DISABLED
Thu Dec 10 14:54:56 2020   pkcs11_cert_private = DISABLED
Thu Dec 10 14:54:56 2020   pkcs11_cert_private = DISABLED
Thu Dec 10 14:54:56 2020   pkcs11_cert_private = DISABLED
Thu Dec 10 14:54:56 2020   pkcs11_cert_private = DISABLED
Thu Dec 10 14:54:56 2020   pkcs11_cert_private = DISABLED
Thu Dec 10 14:54:56 2020   pkcs11_cert_private = DISABLED
Thu Dec 10 14:54:56 2020   pkcs11_cert_private = DISABLED
Thu Dec 10 14:54:56 2020   pkcs11_cert_private = DISABLED
Thu Dec 10 14:54:56 2020   pkcs11_cert_private = DISABLED
Thu Dec 10 14:54:56 2020   pkcs11_cert_private = DISABLED
Thu Dec 10 14:54:56 2020   pkcs11_cert_private = DISABLED
Thu Dec 10 14:54:56 2020   pkcs11_pin_cache_period = -1
Thu Dec 10 14:54:56 2020   pkcs11_id = '[UNDEF]'
Thu Dec 10 14:54:56 2020   pkcs11_id_management = DISABLED
Thu Dec 10 14:54:56 2020   server_network = 0.0.0.0
Thu Dec 10 14:54:56 2020   server_netmask = 0.0.0.0
Thu Dec 10 14:54:56 2020   server_network_ipv6 = ::
Thu Dec 10 14:54:56 2020   server_netbits_ipv6 = 0
Thu Dec 10 14:54:56 2020   server_bridge_ip = 0.0.0.0
Thu Dec 10 14:54:56 2020   server_bridge_netmask = 0.0.0.0
Thu Dec 10 14:54:56 2020   server_bridge_pool_start = 0.0.0.0
Thu Dec 10 14:54:56 2020   server_bridge_pool_end = 0.0.0.0
Thu Dec 10 14:54:56 2020   ifconfig_pool_defined = DISABLED
Thu Dec 10 14:54:56 2020   ifconfig_pool_start = 0.0.0.0
Thu Dec 10 14:54:56 2020   ifconfig_pool_end = 0.0.0.0
Thu Dec 10 14:54:56 2020   ifconfig_pool_netmask = 0.0.0.0
Thu Dec 10 14:54:56 2020   ifconfig_pool_persist_filename = '[UNDEF]'
Thu Dec 10 14:54:56 2020   ifconfig_pool_persist_refresh_freq = 600
Thu Dec 10 14:54:56 2020   ifconfig_ipv6_pool_defined = DISABLED
Thu Dec 10 14:54:56 2020   ifconfig_ipv6_pool_base = ::
Thu Dec 10 14:54:56 2020   ifconfig_ipv6_pool_netbits = 0
Thu Dec 10 14:54:56 2020   n_bcast_buf = 256
Thu Dec 10 14:54:56 2020   tcp_queue_limit = 64
Thu Dec 10 14:54:56 2020   real_hash_size = 256
Thu Dec 10 14:54:56 2020   virtual_hash_size = 256
Thu Dec 10 14:54:56 2020   client_connect_script = '[UNDEF]'
Thu Dec 10 14:54:56 2020   learn_address_script = '[UNDEF]'
Thu Dec 10 14:54:56 2020   client_disconnect_script = '[UNDEF]'
Thu Dec 10 14:54:56 2020   client_config_dir = '[UNDEF]'
Thu Dec 10 14:54:56 2020   ccd_exclusive = DISABLED
Thu Dec 10 14:54:56 2020   tmp_dir = 'C:\Users\Martin\AppData\Local\Temp\'
Thu Dec 10 14:54:56 2020   push_ifconfig_defined = DISABLED
Thu Dec 10 14:54:56 2020   push_ifconfig_local = 0.0.0.0
Thu Dec 10 14:54:56 2020   push_ifconfig_remote_netmask = 0.0.0.0
Thu Dec 10 14:54:56 2020   push_ifconfig_ipv6_defined = DISABLED
Thu Dec 10 14:54:56 2020   push_ifconfig_ipv6_local = ::/0
Thu Dec 10 14:54:56 2020   push_ifconfig_ipv6_remote = ::
Thu Dec 10 14:54:56 2020   enable_c2c = DISABLED
Thu Dec 10 14:54:56 2020   duplicate_cn = DISABLED
Thu Dec 10 14:54:56 2020   cf_max = 0
Thu Dec 10 14:54:56 2020   cf_per = 0
Thu Dec 10 14:54:56 2020   max_clients = 1024
Thu Dec 10 14:54:56 2020   max_routes_per_client = 256
Thu Dec 10 14:54:56 2020   auth_user_pass_verify_script = '[UNDEF]'
Thu Dec 10 14:54:56 2020   auth_user_pass_verify_script_via_file = DISABLED
Thu Dec 10 14:54:56 2020   auth_token_generate = DISABLED
Thu Dec 10 14:54:56 2020   auth_token_lifetime = 0
Thu Dec 10 14:54:56 2020   auth_token_secret_file = '[UNDEF]'
Thu Dec 10 14:54:56 2020   vlan_tagging = DISABLED
Thu Dec 10 14:54:56 2020   vlan_accept = all
Thu Dec 10 14:54:56 2020   vlan_pvid = 1
Thu Dec 10 14:54:56 2020   client = ENABLED
Thu Dec 10 14:54:56 2020   pull = ENABLED
Thu Dec 10 14:54:56 2020   auth_user_pass_file = '[UNDEF]'
Thu Dec 10 14:54:56 2020   show_net_up = DISABLED
Thu Dec 10 14:54:56 2020   route_method = 3
Thu Dec 10 14:54:56 2020   block_outside_dns = DISABLED
Thu Dec 10 14:54:56 2020   ip_win32_defined = DISABLED
Thu Dec 10 14:54:56 2020   ip_win32_type = 3
Thu Dec 10 14:54:56 2020   dhcp_masq_offset = 0
Thu Dec 10 14:54:56 2020   dhcp_lease_time = 31536000
Thu Dec 10 14:54:56 2020   tap_sleep = 0
Thu Dec 10 14:54:56 2020   dhcp_options = DISABLED
Thu Dec 10 14:54:56 2020   dhcp_renew = DISABLED
Thu Dec 10 14:54:56 2020   dhcp_pre_release = DISABLED
Thu Dec 10 14:54:56 2020   domain = '[UNDEF]'
Thu Dec 10 14:54:56 2020   netbios_scope = '[UNDEF]'
Thu Dec 10 14:54:56 2020   netbios_node_type = 0
Thu Dec 10 14:54:56 2020   disable_nbt = DISABLED
Thu Dec 10 14:54:56 2020 OpenVPN 2.5.0 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [LZ4] [PKCS11] [AEAD] built on Oct 28 2020
Thu Dec 10 14:54:56 2020 Windows version 10.0 (Windows 10 or greater) 64bit
Thu Dec 10 14:54:56 2020 library versions: OpenSSL 1.1.1h  22 Sep 2020, LZO 2.10
Thu Dec 10 14:54:56 2020 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:25341
Thu Dec 10 14:54:56 2020 Need hold release from management interface, waiting...
Thu Dec 10 14:54:56 2020 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:25341
Thu Dec 10 14:54:57 2020 MANAGEMENT: CMD 'state on'
Thu Dec 10 14:54:57 2020 MANAGEMENT: CMD 'log all on'
Thu Dec 10 14:54:57 2020 MANAGEMENT: CMD 'echo all on'
Thu Dec 10 14:54:57 2020 MANAGEMENT: CMD 'bytecount 5'
Thu Dec 10 14:54:57 2020 MANAGEMENT: CMD 'hold off'
Thu Dec 10 14:54:57 2020 MANAGEMENT: CMD 'hold release'
Thu Dec 10 14:54:57 2020 LZO compression initializing
Thu Dec 10 14:54:57 2020 Control Channel MTU parms [ L:1624 D:1210 EF:40 EB:0 ET:0 EL:3 ]
Thu Dec 10 14:54:57 2020 Data Channel MTU parms [ L:1624 D:1450 EF:124 EB:406 ET:0 EL:3 ]
Thu Dec 10 14:54:57 2020 Local Options String (VER=V4): 'V4,dev-type tun,link-mtu 1560,tun-mtu 1500,proto TCPv4_CLIENT,comp-lzo,auth SHA1,keysize 128,key-method 2,tls-client'
Thu Dec 10 14:54:57 2020 Expected Remote Options String (VER=V4): 'V4,dev-type tun,link-mtu 1560,tun-mtu 1500,proto TCPv4_SERVER,comp-lzo,auth SHA1,keysize 128,key-method 2,tls-server'
Thu Dec 10 14:54:57 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]82.234.85.251:49511
Thu Dec 10 14:54:57 2020 Socket Buffers: R=[65536->65536] S=[65536->65536]
Thu Dec 10 14:54:57 2020 Attempting to establish TCP connection with [AF_INET]82.234.85.251:49511 [nonblock]
Thu Dec 10 14:54:57 2020 MANAGEMENT: >STATE:1607608497,TCP_CONNECT,,,,,,
Thu Dec 10 14:54:57 2020 TCP connection established with [AF_INET]82.234.85.251:49511
Thu Dec 10 14:54:57 2020 TCP_CLIENT link local: (not bound)
Thu Dec 10 14:54:57 2020 TCP_CLIENT link remote: [AF_INET]82.234.85.251:49511
Thu Dec 10 14:54:57 2020 MANAGEMENT: >STATE:1607608497,WAIT,,,,,,
Thu Dec 10 14:54:57 2020 MANAGEMENT: >STATE:1607608497,AUTH,,,,,,
Thu Dec 10 14:54:57 2020 TLS: Initial packet from [AF_INET]82.234.85.251:49511, sid=10a30b18 9323f915
Thu Dec 10 14:54:58 2020 VERIFY KU OK
Thu Dec 10 14:54:58 2020 Validating certificate extended key usage
Thu Dec 10 14:54:58 2020 ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication
Thu Dec 10 14:54:58 2020 VERIFY EKU OK
Thu Dec 10 14:54:58 2020 VERIFY OK: depth=0, C=CN, ST=GD, L=ShenZhen, O=TP-Link, OU=SOHO-I18N, CN=server, emailAddress=xxxx@xxxx
Thu Dec 10 14:54:58 2020 NOTE: Options consistency check may be skewed by version differences
Thu Dec 10 14:54:58 2020 WARNING: 'version' is used inconsistently, local='version V4', remote='version V0 UNDEF'
Thu Dec 10 14:54:58 2020 WARNING: 'dev-type' is present in local config but missing in remote config, local='dev-type tun'
Thu Dec 10 14:54:58 2020 WARNING: 'link-mtu' is present in local config but missing in remote config, local='link-mtu 1560'
Thu Dec 10 14:54:58 2020 WARNING: 'tun-mtu' is present in local config but missing in remote config, local='tun-mtu 1500'
Thu Dec 10 14:54:58 2020 WARNING: 'comp-lzo' is present in local config but missing in remote config, local='comp-lzo'
Thu Dec 10 14:54:58 2020 WARNING: 'auth' is present in local config but missing in remote config, local='auth SHA1'
Thu Dec 10 14:54:58 2020 WARNING: 'keysize' is present in local config but missing in remote config, local='keysize 128'
Thu Dec 10 14:54:58 2020 WARNING: 'tls-server' is present in local config but missing in remote config, local='tls-server'
Thu Dec 10 14:54:58 2020 Control Channel: TLSv1.2, cipher TLSv1.2 DHE-RSA-AES256-GCM-SHA384, 1024 bit RSA
Thu Dec 10 14:54:58 2020 [server] Peer Connection Initiated with [AF_INET]82.234.85.251:49511
Thu Dec 10 14:54:59 2020 MANAGEMENT: >STATE:1607608499,GET_CONFIG,,,,,,
Thu Dec 10 14:54:59 2020 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1)
Thu Dec 10 14:55:00 2020 PUSH: Received control message: 'PUSH_REPLY,route 192.168.0.0 255.255.255.0,route 17.17.7.0 255.255.255.0,dhcp-option DNS 17.17.7.1,dhcp-option DNS 8.8.8.8,route 17.17.7.0 255.255.255.0,topology net30,ping 10,ping-restart 120,ifconfig 17.17.7.6 17.17.7.5'
Thu Dec 10 14:55:00 2020 OPTIONS IMPORT: timers and/or timeouts modified
Thu Dec 10 14:55:00 2020 OPTIONS IMPORT: --ifconfig/up options modified
Thu Dec 10 14:55:00 2020 OPTIONS IMPORT: route options modified
Thu Dec 10 14:55:00 2020 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified
Thu Dec 10 14:55:00 2020 Outgoing Data Channel: Cipher 'AES-128-CBC' initialized with 128 bit key
Thu Dec 10 14:55:00 2020 Outgoing Data Channel: Using 160 bit message hash 'SHA1' for HMAC authentication
Thu Dec 10 14:55:00 2020 Incoming Data Channel: Cipher 'AES-128-CBC' initialized with 128 bit key
Thu Dec 10 14:55:00 2020 Incoming Data Channel: Using 160 bit message hash 'SHA1' for HMAC authentication
Thu Dec 10 14:55:00 2020 interactive service msg_channel=908
Thu Dec 10 14:55:00 2020 ROUTE_GATEWAY 191.169.42.175/255.255.255.0 I=13 HWADDR=c8:09:a8:81:55:6f
Thu Dec 10 14:55:00 2020 open_tun
Thu Dec 10 14:55:00 2020 tap-windows6 device [OpenVPN TAP-Windows6] opened
Thu Dec 10 14:55:00 2020 TAP-Windows Driver Version 9.24 
Thu Dec 10 14:55:00 2020 TAP-Windows MTU=1500
Thu Dec 10 14:55:00 2020 Notified TAP-Windows driver to set a DHCP IP/netmask of 17.17.7.6/255.255.255.252 on interface {F936F736-9F37-4E42-935C-2E3E6E1CFBE9} [DHCP-serv: 17.17.7.5, lease-time: 31536000]
Thu Dec 10 14:55:00 2020 DHCP option string: 06081111 07010808 0808
Thu Dec 10 14:55:00 2020 Successful ARP Flush on interface [22] {F936F736-9F37-4E42-935C-2E3E6E1CFBE9}
Thu Dec 10 14:55:00 2020 do_ifconfig, ipv4=1, ipv6=0
Thu Dec 10 14:55:00 2020 MANAGEMENT: >STATE:1607608500,ASSIGN_IP,,17.17.7.6,,,,
Thu Dec 10 14:55:00 2020 IPv4 MTU set to 1500 on interface 22 using service
Thu Dec 10 14:55:05 2020 TEST ROUTES: 3/3 succeeded len=3 ret=1 a=0 u/d=up
Thu Dec 10 14:55:05 2020 MANAGEMENT: >STATE:1607608505,ADD_ROUTES,,,,,,
Thu Dec 10 14:55:05 2020 C:\WINDOWS\system32\route.exe ADD 192.168.0.0 MASK 255.255.255.0 17.17.7.5
Thu Dec 10 14:55:05 2020 Route addition via service succeeded
Thu Dec 10 14:55:05 2020 C:\WINDOWS\system32\route.exe ADD 17.17.7.0 MASK 255.255.255.0 17.17.7.5
Thu Dec 10 14:55:05 2020 Route addition via service succeeded
Thu Dec 10 14:55:05 2020 C:\WINDOWS\system32\route.exe ADD 17.17.7.0 MASK 255.255.255.0 17.17.7.5
Thu Dec 10 14:55:05 2020 ROUTE: route addition failed using service: Tento objekt již existuje.   [status=5010 if_index=22]
Thu Dec 10 14:55:05 2020 Route addition via service failed
Thu Dec 10 14:55:05 2020 Initialization Sequence Completed
Thu Dec 10 14:55:05 2020 MANAGEMENT: >STATE:1607608505,CONNECTED,SUCCESS,17.17.7.6,91.232.85.251,49511,192.168.43.20,59850
Last edited by Pippin on Thu Dec 10, 2020 2:10 pm, edited 1 time in total.
Reason: Formatting
Top
TinCanTech
OpenVPN Protagonist
Posts: 11139
Joined: Fri Jun 03, 2016 1:17 pm

Re: OpenVPN Connect Windows

Post by TinCanTech » Thu Dec 10, 2020 3:17 pm

Now start a download ..
Top
Muzdrav
OpenVpn Newbie
Posts: 10
Joined: Tue Dec 08, 2020 2:26 pm

Re: OpenVPN Connect Windows

Post by Muzdrav » Thu Dec 10, 2020 4:13 pm

TinCanTech wrote: ↑
Thu Dec 10, 2020 3:17 pm
 Now start a download ..
when I start to download, nothing else shows up in the log.
Top
TinCanTech
OpenVPN Protagonist
Posts: 11139
Joined: Fri Jun 03, 2016 1:17 pm

Re: OpenVPN Connect Windows

Post by TinCanTech » Thu Dec 10, 2020 4:42 pm

Muzdrav wrote: ↑
Thu Dec 10, 2020 4:13 pm
 when I start to download, nothing else shows up in the log.
Also check your server log.
Top
TinCanTech
OpenVPN Protagonist
Posts: 11139
Joined: Fri Jun 03, 2016 1:17 pm

Re: OpenVPN Connect Windows

Post by TinCanTech » Thu Dec 10, 2020 5:50 pm

Muzdrav wrote: ↑
Tue Dec 08, 2020 2:39 pm
 The router is connected right to the satelite of the internet provider
Describe this please.
Top
Muzdrav
OpenVpn Newbie
Posts: 10
Joined: Tue Dec 08, 2020 2:26 pm

Re: OpenVPN Connect Windows

Post by Muzdrav » Fri Dec 11, 2020 8:31 am

TinCanTech wrote: ↑
Thu Dec 10, 2020 5:50 pm
Muzdrav wrote: ↑
Tue Dec 08, 2020 2:39 pm
 The router is connected right to the satelite of the internet provider
Describe this please.
There is a satelite on the roof, from which comes an blue like ethernet cable (but smaller), this blue cable goes into an adapter with AC supply, on the other side of the adapter, normal ethernet cable goes to the the WAN of the router. 3 PCs and one wifi as acces point are connected with LAN cable to this router.
Top
TinCanTech
OpenVPN Protagonist
Posts: 11139
Joined: Fri Jun 03, 2016 1:17 pm

Re: OpenVPN Connect Windows

Post by TinCanTech » Fri Dec 11, 2020 4:40 pm

My experience of consumer grade satellite internet uses the satellite for download only and uses the telephone for upstream data .. is this the case for you ?
Top
Muzdrav
OpenVpn Newbie
Posts: 10
Joined: Tue Dec 08, 2020 2:26 pm

Re: OpenVPN Connect Windows

Post by Muzdrav » Fri Dec 11, 2020 8:09 pm

TinCanTech wrote: ↑
Fri Dec 11, 2020 4:40 pm
 My experience of consumer grade satellite internet uses the satellite for download only and uses the telephone for upstream data .. is this the case for you ?
no, all I have is the one connection.
Top
TinCanTech
OpenVPN Protagonist
Posts: 11139
Joined: Fri Jun 03, 2016 1:17 pm

Re: OpenVPN Connect Windows

Post by TinCanTech » Fri Dec 11, 2020 9:02 pm

Can you access a device to configure the satellite ?
Top
Post Reply

Return to “The OpenVPN Access Server”