Bridge Ubuntu server under VMware

[makkon]

Greetings!
Im try to up my OVPN server to combine multiple remote networks into one over a secure connection (important) + im need it for some monitoring soft.

LAN 1: under router dlink. 192.168.0.0/24 (192.168.0.1-200) - with 1.2.3.4 static Internet IP. Server under this LAN on 192.168.0.39 (Ubuntu 10.1) and some PC with 192.168.0.x.
LAN 2: under router dlink. 192.168.0.0/24 (192.168.0.1-200) - only 1 pc
- port forwarding is enabled
- firewalls is disabled
- iptables done for server done
- clients under Windows 7 and XP
- Ubuntu server under VMware (bridge settings for network)

http://openvpn.net/index.php/open-sourc ... dging.html
use it
We decided to use tap interface and Ethernet bridging.
So im put in /etc/networking/interfaces

Code: Select all

auto lo
iface lo inet loopback

auto eth1
iface eth1 inet static
address 192.168.0.39
netmask 255.255.255.0
gateway 192.168.0.1
broadcast 192.168.0.255

restart network(ping is working)
next step is run script bridge-start with my settings:

eth="eth1"
eth_ip="192.168.0.39"
eth_netmask="255.255.255.0"
eth_broadcast="192.168.0.255"

and run openvpn demon and got ifconfig -a like this:

Code: Select all

br0       Link encap:Ethernet  HWaddr 00:0c:29:98:64:38  
          inet addr:192.168.0.39  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::20c:29ff:fe98:6438/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:45 errors:0 dropped:0 overruns:0 frame:0
          TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:3634 (3.6 KB)  TX bytes:594 (594.0 B)

eth1      Link encap:Ethernet  HWaddr 00:0c:29:98:64:38  
          inet6 addr: fe80::20c:29ff:fe98:6438/64 Scope:Link
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
          RX packets:39482 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6652 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:6602441 (6.6 MB)  TX bytes:944089 (944.0 KB)
          Interrupt:19 Base address:0x2000 

lo        Link encap:Локальная петля (Loopback)  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:80 errors:0 dropped:0 overruns:0 frame:0
          TX packets:80 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:6517 (6.5 KB)  TX bytes:6517 (6.5 KB)

tap0      Link encap:Ethernet  HWaddr e6:a3:16:01:dd:3d  
          inet6 addr: fe80::e4a3:16ff:fe01:dd3d/64 Scope:Link
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:43 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:0 (0.0 B)  TX bytes:628 (628.0 B)

ping isnt work ofc.

This is my first problems. Im try to make bridge using
https://help.ubuntu.com/community/OpenVPN
clients can connect, but pings on their new IPs isnt work.

server.conf

Code: Select all

port 1194
proto udp

dev tap0

ca /etc/openvpn/keys/ca.crt
cert /etc/openvpn/keys/server.crt
key /etc/openvpn/keys/server.key  # This file should be kept secret
dh /etc/openvpn/keys/dh1024.pem

ifconfig-pool-persist /etc/openvpn/ipp.txt

server-bridge 192.168.0.39 255.255.255.0 192.168.0.230 192.168.0.250

keepalive 10 120

comp-lzo

;user nobody
;group nobody

persist-key
persist-tun

status /etc/openvpn/openvpn-status.log

log         /etc/openvpn/openvpn.log
log-append  /etc/openvpn/openvpn.log

verb 6
mute 20

client.ovpn

Code: Select all

client


dev tap
;dev tun

;dev-node MyTap

proto udp

remote 1.2.3.4 1194

resolv-retry infinite

nobind

persist-key
persist-tun

ca c:\\OpenVPNPortable\\data\\config\\ca.crt
cert c:\\OpenVPNPortable\\data\\config\\client1.crt
key c:\\OpenVPNPortable\\data\\config\\client1.key


comp-lzo
verb 3
mute 20
remote-cert-tls server

Can some1 forward me in the right direction? Thx