Issues with initial bridge setup

nanotronicsimaging · Post by **nanotronicsimaging** » Thu Sep 22, 2011 1:16 pm

I had thought that I added a static route for the openvpn server

network address: 192.168.11.254
subnet mask 255.255.255.0
gateway: 10.8.0.1
interface: lan

Post by **maikcat** » Thu Sep 22, 2011 1:30 pm

you must add to your lan pcs something like

route add 10.8.0.0 mask 255.255.255.0 192.168.11.5

11.5 is (?) openvpn servers lan ip

Michael.

nanotronicsimaging · Post by **nanotronicsimaging** » Thu Sep 22, 2011 1:36 pm

yes 11.5 is the openvpn linux server, ill try that command again on a different lan pc

nanotronicsimaging · Post by **nanotronicsimaging** » Thu Sep 22, 2011 5:55 pm

still didnt work

nanotronicsimaging · Post by **nanotronicsimaging** » Mon Sep 26, 2011 12:36 pm

Any other suggestions?

Post by **maikcat** » Tue Sep 27, 2011 6:07 pm

please post the output of

tracert 10.8.0.1

from a pc inside your lan (with the static route added to it)

Michael.

nanotronicsimaging · Post by **nanotronicsimaging** » Tue Sep 27, 2011 8:03 pm

I have solved the issue! Thanks for all your help, I just need to get the DNS to push correctly now

Post by **janjust** » Wed Sep 28, 2011 7:45 am

that is excellent new!

For a thread this long, please explain a bit more in detail how you solved it; what is the final openvpn, bridge and/or iptables configuration?

OpenVPN Support Forum

Issues with initial bridge setup

Re: Issues with initial bridge setup

Re: Issues with initial bridge setup

Re: Issues with initial bridge setup

Re: Issues with initial bridge setup

Re: Issues with initial bridge setup

Re: Issues with initial bridge setup

Re: Issues with initial bridge setup

Re: Issues with initial bridge setup