hi all,
getting this error on openvpn client connecting to an openvpn server
the funny thing is the client can open up a telnet session to the server, so they can hit the tcp port, the openvpn server is using tcp not udp
the client is in cairo so they block vpn especially openvpn, even using a different port doesnt help
can i put a new line in the client config or the server config?
anyone else have suggestions
thanks,
rob
read tcp_client unknown error (code=10060)
Moderators: TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech
-
- OpenVPN User
- Posts: 21
- Joined: Mon Oct 19, 2015 9:38 pm
-
- OpenVPN Protagonist
- Posts: 11137
- Joined: Fri Jun 03, 2016 1:17 pm
Re: read tcp_client unknown error (code=10060)
Code: Select all
WSAETIMEDOUT
10060
Connection timed out.
A connection attempt failed because the connected party did not properly respond after a period of time, or the established connection failed because the connected host has failed to respond.
And so it times out on connection because it is blocked.
-
- OpenVPN User
- Posts: 21
- Joined: Mon Oct 19, 2015 9:38 pm
Re: read tcp_client unknown error (code=10060)
Yes, it is blocked, is there anyway round the block
-
- OpenVPN User
- Posts: 21
- Joined: Mon Oct 19, 2015 9:38 pm
Re: read tcp_client unknown error (code=10060)
Can the users create an ssh tunnel to the Fw and then run up openvpn client