OpenVPN Support Forum

Hello,

This is a new setup where I CANNOT connect on "OpenVPN Connect" ver. 3.4.2, but I CAN connect thru "OpenVPN GUI" ver. 2.6.6 (both on Windows 11). My OVPN server is configured on Mikrotik RouterOS RB2011iL v.7.11.2.

When I connect thru "OpenVPN Connect" client, Mikrotik logs show me connect then disconnect with a message saying "Unsupported Cipher".

Here's the .ovpn config file:

******************************************
client
dev tun
proto tcp-client
remote <my public IP>
port 1194
nobind
persist-key
persist-tun
tls-client
remote-cert-tls server
verb 4
mute 10
data-ciphers AES-256-GCM:AES-128-GCM:AES-256-CBC
data-ciphers-fallback AES-256-CBC
#auth SHA1
auth-user-pass secret
auth-nocache

route <my private network>

redirect-gateway def1

<ca>
-----BEGIN CERTIFICATE-----
Gibberish
-----END CERTIFICATE-----
</ca>

<cert>
-----BEGIN CERTIFICATE-----
Gibberish
-----END CERTIFICATE-----
</cert>

<key>
-----BEGIN ENCRYPTED PRIVATE KEY-----
Gibberish
-----END ENCRYPTED PRIVATE KEY-----
</key>
******************************************

Do I Need to add/remove/edit a line from the .ovpn config file (so it can work on both windows clients and eventually Android/iOS clients) or is there a setting that I need to change on the OVPN server on the Mikrotik?

Thank you for your assistance!

Any thoughts?

Thank you!

I finally got it working!!

Bottom line:
"OpenVPN Connect" ver. 3.4.2 (for Windows) does NOT support AES-CBC and ONLY supports AES-GCM.
"OpenVPN GUI" ver. 2.6.6 (for Windows) does support BOTH AES-CBC and AES-GCM.

This is what my .ovpn config file looks like now, which works on both OpenVPN Windows clients:

***************************************
client
dev tun
proto tcp-client
remote <my public IP>
port 1194
nobind
persist-key
persist-tun
tls-client
remote-cert-tls server
verb 4
mute 10
cipher AES-256-GCM
auth-user-pass secret
auth-nocache

route <my private network>

redirect-gateway def1

<ca>
-----BEGIN CERTIFICATE-----
Gibberish
-----END CERTIFICATE-----
</ca>

<cert>
-----BEGIN CERTIFICATE-----
Gibberish
-----END CERTIFICATE-----
</cert>

<key>
-----BEGIN ENCRYPTED PRIVATE KEY-----
Gibberish
-----END ENCRYPTED PRIVATE KEY-----
</key>
***************************************

Remember to enable "AES 256 GCM" cipher in the OpenVPN server (in my case, it's the Mikrotik). Hope this helps!!