OpenVPN file works correctly on windows but not on linux
Posted: Mon Jan 23, 2023 12:43 am
I've been trying to solve my problem with OpenVPN for almost a month now. The configuration file works perfectly when imported on windows but not on linux, regardless of Distro.
There are no error messages or anything like that, I'm connected to the internet normally but I can't access the network via IP, unlike what happens in Windows which works perfectly. Forgive me, but that's all I can say about networking.
This is my current config file:
Let me know if I can help in another way to understand the problem
There are no error messages or anything like that, I'm connected to the internet normally but I can't access the network via IP, unlike what happens in Windows which works perfectly. Forgive me, but that's all I can say about networking.
This is my current config file:
Code: Select all
pull
tls-cipher "DEFAULT:@SECLEVEL=0"
client
dev tun
tls-client
remote-cert-eku "TLS Web Server Authentication"
proto udp
remote XX.XX.XXX.XXX 1194 udp
topology subnet
pull
user nobody
group nobody
cipher AES-256-CBC
<ca>
-----BEGIN CERTIFICATE-----
# My certificate
-----END CERTIFICATE-----
</ca>
<cert>
# Certificate info
</cert>
<key>
-----BEGIN PRIVATE KEY-----
# Private key
-----END PRIVATE KEY-----
</key>
<tls-crypt>
#
# 2048 bit OpenVPN static key
#
-----BEGIN OpenVPN Static key V1-----
# OpenVPN Static key
-----END OpenVPN Static key V1-----
</tls-crypt>
Code: Select all
$ ifconfig
enp5s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.0.186 netmask 255.255.255.0 broadcast 192.168.0.255
inet6 2804:10f8:a449:a200::103 prefixlen 128 scopeid 0x0<global>
inet6 fe80::3553:1e8:52f7:4597 prefixlen 64 scopeid 0x20<link>
ether 3c:7c:3f:7b:6b:06 txqueuelen 1000 (Ethernet)
RX packets 23313 bytes 17674028 (16.8 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 20278 bytes 4649238 (4.4 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 134 bytes 12388 (12.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 134 bytes 12388 (12.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500
inet 10.8.0.18 netmask 255.255.255.0 destination 10.8.0.18
inet6 fe80::6f:9b64:b420:1027 prefixlen 64 scopeid 0x20<link>
unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 500 (UNSPEC)
RX packets 30 bytes 1200 (1.1 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 127 bytes 9788 (9.5 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0