Page 1 of 1

Route network in VPN cloud

Posted: Thu Sep 29, 2022 11:23 am
by gennarop

i have this configuration:


I have config Network on VPN cloud and download config and upload on client network on NAS synology.
Synology connect to vpn correctly.
Network Synology is : - gw=
Pc2= (
Pc1= (on same network synology -

and when i connect to vpn from pc2 on rete2 with network -> connect to vpncloud with vpnconnect3
i connect ok
if i ping nas is correct.
The route is correct becouse there is a route that download in automatic from vpn -> to vpn
So when i ping from (pc on rete2) -> to Nas ( = ping is ok

Now if i want ping another PC1 on rete1 ( the routing is correct but i think that less another route i think on the pctest2.
becouse from PC1 if i do tracert -> the trace go to vpn but there isn't response after.

So What route i must add for ping PC1 from pc2 ?
Or what is wrong?

Thanks for help.

Re: Route network in VPN cloud

Posted: Thu Sep 29, 2022 1:22 pm
by openvpn_inc

In your NAS Connector, please make sure to enable NAT and Routing as described in the below article: ... onnectors/