OpenVPN Support Forum

Posted: **Sun Mar 28, 2021 1:47 pm**

plss tall me what im doing wrong?

i can only connect to server via switch0 ip: 192.168.10.1 but myip.com shows my extrenal ip..

https://i.imgur.com/r3VuWLg.jpg

Code: Select all

client
dev tun
proto udp
remote 192.168.10.1 1194
float
resolv-retry infinite 
nobind
persist-key 
persist-tun 
verb 3
ca cacert.pem 
cert client1.pem
key client1.key
redirect-gateway def1
auth-nocache

Posted: **Sun Mar 28, 2021 4:04 pm**

user0110 wrote: ↑
Sun Mar 28, 2021 1:47 pm
i can only connect to server via switch0 ip: 192.168.10.1

user0110 wrote: ↑
Sun Mar 28, 2021 1:47 pm
remote 192.168.10.1 1194

Posted: **Sun Mar 28, 2021 11:48 pm**

you use redirect-gateway def1 so it will show that just remove that line and connect from internet to check it . dont connect the same lan and make it confuse .

Posted: **Mon Mar 29, 2021 1:26 am**

@300000 .. wrong .. again.

@300000 You are basically an idiot .. the issue here has nothing to do with routing.

OpenVPN Support Forum

EdgeRouter X Server-Cilent Configuration

EdgeRouter X Server-Cilent Configuration

Re: EdgeRouter X Server-Cilent Configuration

Re: EdgeRouter X Server-Cilent Configuration

Re: EdgeRouter X Server-Cilent Configuration