Hey all,
Is there a special configuration needed to do this?
Using AirVPN and they say that they support 6 over 4 but I need to do this inside a tunnel to subvert the ISP's limitations.
Is it possible? And If so, what needs to be done to allow this communication?
Thanks!
Tony
Allow SIT Encapsulation/Protocol 41 for 6to4 INSIDE OpenVPN tunnel
Moderators: TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech
-
- OpenVpn Newbie
- Posts: 2
- Joined: Wed Aug 26, 2020 6:11 am
-
- OpenVPN Protagonist
- Posts: 11139
- Joined: Fri Jun 03, 2016 1:17 pm
Re: Allow SIT Encapsulation/Protocol 41 for 6to4 INSIDE OpenVPN tunnel
OpenVPN is a VPN: Packets go in one end and come out the other. That is all ..
I think you may be barking up the wrong tree.
I think you may be barking up the wrong tree.
-
- OpenVpn Newbie
- Posts: 2
- Joined: Wed Aug 26, 2020 6:11 am
Re: Allow SIT Encapsulation/Protocol 41 for 6to4 INSIDE OpenVPN tunnel
Don't know why you would say that. In order to get around ISP limitations, a VPN is required for IPv6 and, the only way I can get said IPv6 is TunnelBroker. It essentially becomes a tunnel inside of a tunnel.
-
- OpenVPN Protagonist
- Posts: 11139
- Joined: Fri Jun 03, 2016 1:17 pm
Re: Allow SIT Encapsulation/Protocol 41 for 6to4 INSIDE OpenVPN tunnel
Which is what TunnelBroker is meant to do.
TunnelBroker is not OpenVPN.
OpenVPN can use IPv4 or v6, inside or outside the tunnel.
OpenVPN does not do 6to4 or 4to6, inside or outside the tunnel.
@Mod -> Off Topic, please
