Good Day
I have just installed OpenVPN 2.3.8-i602 on my Windows 10 PC in Server Mode and the Client on my Windows 10 Laptop and On the Server Side I can see the Following Message on my Server
Thu Feb 13 13:27:08 2020 us=238468 Could not determine IPv4/IPv6 protocol. Using AF_INET6
Thu Feb 13 13:27:08 2020 us=238468 Socket Buffers: R=[65536->65536] S=[65536->65536]
Thu Feb 13 13:27:08 2020 us=238468 setsockopt(IPV6_V6ONLY=0)
Thu Feb 13 13:27:08 2020 us=239465 UDPv6 link local (bound): [AF_INET6][undef]:1194
Thu Feb 13 13:27:08 2020 us=239465 UDPv6 link remote: [AF_UNSPEC]
Wanting to Know if this is an error and Possibly causing me issues with trying to connect my VPN Client
Could not determine IPv4/IPv6 protocol. Using AF_INET6
Moderators: TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech
-
- OpenVpn Newbie
- Posts: 3
- Joined: Thu Feb 13, 2020 12:34 am
- Pippin
- Forum Team
- Posts: 1201
- Joined: Wed Jul 01, 2015 8:03 am
- Location: irc://irc.libera.chat:6697/openvpn
Re: Could not determine IPv4/IPv6 protocol. Using AF_INET6
It's no issue.
IPv4/IPv6 protocol is not specified in the config.
IPv4/IPv6 protocol is not specified in the config.
I gloomily came to the ironic conclusion that if you take a highly intelligent person and give them the best possible, elite education, then you will most likely wind up with an academic who is completely impervious to reality.
Halton Arp
Halton Arp
-
- OpenVpn Newbie
- Posts: 3
- Joined: Thu Feb 13, 2020 12:34 am
Re: Could not determine IPv4/IPv6 protocol. Using AF_INET6
Thanks for the quick reply