OpenVPN Support Forum

Posted: **Wed Feb 21, 2018 4:53 pm**

Hello,

i set up VPN connection on win7 due to manual. I was trying to connect with client, but there is problem.

Wed Feb 21 17:41:08 2018 OpenVPN 2.4.4 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [LZ4] [PKCS11] [AEAD] built on Sep 26 2017
Wed Feb 21 17:41:08 2018 Windows version 6.1 (Windows 7) 64bit
Wed Feb 21 17:41:08 2018 library versions: OpenSSL 1.0.2l 25 May 2017, LZO 2.10
Wed Feb 21 17:41:08 2018 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:25340
Wed Feb 21 17:41:08 2018 Need hold release from management interface, waiting...
Wed Feb 21 17:41:09 2018 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:25340
Wed Feb 21 17:41:09 2018 MANAGEMENT: CMD 'state on'
Wed Feb 21 17:41:09 2018 MANAGEMENT: CMD 'log all on'
Wed Feb 21 17:41:09 2018 MANAGEMENT: CMD 'echo all on'
Wed Feb 21 17:41:09 2018 MANAGEMENT: CMD 'hold off'
Wed Feb 21 17:41:09 2018 MANAGEMENT: CMD 'hold release'
Wed Feb 21 17:41:09 2018 TCP/UDP: Preserving recently used remote address: [AF_INET]185.167.xxx.xxxx:1194
Wed Feb 21 17:41:09 2018 Socket Buffers: R=[8192->8192] S=[8192->8192]
Wed Feb 21 17:41:09 2018 UDP link local: (not bound)
Wed Feb 21 17:41:09 2018 UDP link remote: [AF_INET]185.167.xxx.xxx:1194
Wed Feb 21 17:41:09 2018 MANAGEMENT: >STATE:1519231269,WAIT,,,,,,
Wed Feb 21 17:41:09 2018 read UDP: Unknown error (code=10054)
Wed Feb 21 17:41:11 2018 read UDP: Unknown error (code=10054)
Wed Feb 21 17:41:15 2018 read UDP: Unknown error (code=10054)
Wed Feb 21 17:41:23 2018 read UDP: Unknown error (code=10054)
Wed Feb 21 17:41:39 2018 read UDP: Unknown error (code=10054)
Wed Feb 21 17:42:10 2018 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
Wed Feb 21 17:42:10 2018 TLS Error: TLS handshake failed

My ISP can´t give me an private IP. So he forward port 1194 to my router. There I forward port 1194 to ip of my server.
Is that possible? Do you somebody know where could be a problem?

Thanks for your help and sorry for my bad english

Posted: **Wed Feb 21, 2018 6:33 pm**

Does your server show any connections from this client ?

Posted: **Wed Feb 21, 2018 9:45 pm**

I was tried make set up again. And now I have this error message: Connection reset by peer (WSAECONNRESET) (code=10054)

On the server, I can´t see anything.

Thank you

Posted: **Wed Feb 21, 2018 10:05 pm**

kovacg wrote: ↑
Wed Feb 21, 2018 9:45 pm
On the server, I can´t see anything.

Because the packets are not getting to your server.

kovacg wrote: ↑
Wed Feb 21, 2018 4:53 pm
My ISP can´t give me an private IP. So he forward port 1194 to my router. There I forward port 1194 to ip of my server.

Make sure the port is forwarded correctly .. maybe you can use DMZ on your router ?

Posted: **Thu Feb 22, 2018 5:08 pm**

I think ports are forwarded correctly.

This is forwarded from my ISP

this is forwarded from my Router

Routers IP is xxx.xxx.90.5 and server ip is xxx.xxx.5.254

I don´t know how to use DMZ.

Posted: **Thu Feb 22, 2018 8:52 pm**

kovacg wrote: ↑
Wed Feb 21, 2018 4:53 pm
read UDP: Unknown error (code=10054)

This Windows error message means the connection was reset .. which almost certainly means you have not got either port forwarded correctly or firewall configured correctly.

Posted: **Thu Feb 22, 2018 10:36 pm**

So it could be firewall problem?

Posted: **Wed Apr 01, 2020 2:32 pm**

kovacg wrote: ↑
Thu Feb 22, 2018 10:36 pm
So it could be firewall problem?

Not only Windows Firewall, but third-party anti-virus and/or anti-malware applications as well. I was very frustrated yesterday on a particular computer until I discovered Avast was installed on it and running its network and application shields. Simply add OpenVPN as exception, problem solved.

OpenVPN Support Forum

Unknown Error (Code=10054)

Unknown Error (Code=10054)

Re: Unknown Error (Code=10054)

Re: Unknown Error (Code=10054)

Re: Unknown Error (Code=10054)

Re: Unknown Error (Code=10054)

Re: Unknown Error (Code=10054)

Re: Unknown Error (Code=10054)

Re: Unknown Error (Code=10054)