OpenVPN Support Forum

Some background. I am running OpenVPN on a Raspberry Pi. I have it running great with a Bridged with a Tap interface. I recently got an Android tablet that will only run OpenVPN with a tap interface. I converted my Tap/Bridged RPi server into a Tun/Routed server. Okay it works, but that isn't the problem.

I am able to access the VPN from a PC and Android client from my local coffee shop and it is working fine. The problem is that I cannot access the "Inside Interface" the eth0 interface in the OpenVPN server from my local LAN while the VPN is running. It I stop the service I can access the Local LAN Interface.

Is the a limitation of OpenVPN running a tunnel interface?

I have checked all the routing and can't find a thing wrong with it.

Anyone? Any ideas? Is this an easy fix?

Any help would be greatly appreciated.

Thanks in advance.

Information for Everybody

As you are looking for help with setting up your openvpn server you should have posted on this board:
configuration-f6.html

And read the Forum rules (top of that page).

If you post a detailed thread to the correct board you will probably get a useful answer.