[Solved] TLS handshake timeout (failed to occur in 60 second
Posted: Fri Jun 26, 2015 2:29 am
I know you guys have seen this problem a lot. I spent weeks of lurking around here in my off time to try to figure this out. I'm stumped. Haven't found a solution for "tls handshake failed to occur in 60 seconds". In my server config you'll see commented out "hand-window" and "tls-timeout" commented out as i have tried those. Perhaps there's something going on with my firewall that i need to change and have been unable to find an answer for. All of the files are where they are all supposed to be for the server and the client (this part was not hard, hell, none of this was hard, just this damned timeout is).
My setup is configured to work through a ddns domain name that gets updated once every few hours. I even switched to tcp temporarily to see if that yielded anything different; i still couldn't connect, so went immediately back to preferred udp.
I have tested this configuration on a computer outside of the network. It was my work computer where with a basic vpn connection setup works; how i know where i work, that port 1194 is not blocked. I went for a move for better security.
My router has 1194 port forwarded to my server, local network addressing is 192.168.1.xxx/24.
Server config
Client config
client log
It does the same procedure, no difference when even trying to connect on my local network (the tls timeout). I grabbed log files from trying to connect locally since i knew it was going to do the same thing, and i'm home right now.
Put simply, what do wrong?
My setup is configured to work through a ddns domain name that gets updated once every few hours. I even switched to tcp temporarily to see if that yielded anything different; i still couldn't connect, so went immediately back to preferred udp.
I have tested this configuration on a computer outside of the network. It was my work computer where with a basic vpn connection setup works; how i know where i work, that port 1194 is not blocked. I went for a move for better security.
My router has 1194 port forwarded to my server, local network addressing is 192.168.1.xxx/24.
Server config
Code: Select all
#################################################
# Sample OpenVPN 2.0 config file for #
# multi-client server. #
# #
# This file is for the server side #
# of a many-clients <-> one-server #
# OpenVPN configuration. #
# #
# OpenVPN also supports #
# single-machine <-> single-machine #
# configurations (See the Examples page #
# on the web site for more info). #
# #
# This config should work on Windows #
# or Linux/BSD systems. Remember on #
# Windows to quote pathnames and use #
# double backslashes, e.g.: #
# "C:\\Program Files\\OpenVPN\\config\\foo.key" #
# #
# Comments are preceded with '#' or ';' #
#################################################
# Which local IP address should OpenVPN
# listen on? (optional)
;local a.b.c.d
# Which TCP/UDP port should OpenVPN listen on?
# If you want to run multiple OpenVPN instances
# on the same machine, use a different port
# number for each one. You will need to
# open up this port on your firewall.
port 1194
# TCP or UDP server?
;proto tcp
proto udp
# "dev tun" will create a routed IP tunnel,
# "dev tap" will create an ethernet tunnel.
# Use "dev tap0" if you are ethernet bridging
# and have precreated a tap0 virtual interface
# and bridged it with your ethernet interface.
# If you want to control access policies
# over the VPN, you must create firewall
# rules for the the TUN/TAP interface.
# On non-Windows systems, you can give
# an explicit unit number, such as tun0.
# On Windows, use "dev-node" for this.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun
# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel if you
# have more than one. On XP SP2 or higher,
# you may need to selectively disable the
# Windows firewall for the TAP adapter.
# Non-Windows systems usually don't need this.
;dev-node MyTap
##Minimum tls version
tls-version-min 1.2
# SSL/TLS root certificate (ca), certificate
# (cert), and private key (key). Each client
# and the server must have their own cert and
# key file. The server and all clients will
# use the same ca file.
#
# See the "easy-rsa" directory for a series
# of scripts for generating RSA certificates
# and private keys. Remember to use
# a unique Common Name for the server
# and each of the client certificates.
#
# Any X509 key management system can be used.
# OpenVPN can also use a PKCS #12 formatted key file
# (see "pkcs12" directive in man page).
ca ca.crt
cert server.crt
key server.key # This file should be kept secret
##Remote certification tls web server authentication
remote-cert-eku "TLS Web Server Authentication"
# Diffie hellman parameters.
# Generate your own with:
# openssl dhparam -out dh1024.pem 1024
# Substitute 2048 for 1024 if you are using
# 2048 bit keys.
dh dh4096.pem
# Configure server mode and supply a VPN subnet
# for OpenVPN to draw client addresses from.
# The server will take 10.8.0.1 for itself,
# the rest will be made available to clients.
# Each client will be able to reach the server
# on 10.8.0.1. Comment this line out if you are
# ethernet bridging. See the man page for more info.
server 10.8.0.0 255.255.255.0
# Maintain a record of client <-> virtual IP address
# associations in this file. If OpenVPN goes down or
# is restarted, reconnecting clients can be assigned
# the same virtual IP address from the pool that was
# previously assigned.
ifconfig-pool-persist ipp.txt
# Configure server mode for ethernet bridging.
# You must first use your OS's bridging capability
# to bridge the TAP interface with the ethernet
# NIC interface. Then you must manually set the
# IP/netmask on the bridge interface, here we
# assume 10.8.0.4/255.255.255.0. Finally we
# must set aside an IP range in this subnet
# (start=10.8.0.50 end=10.8.0.100) to allocate
# to connecting clients. Leave this line commented
# out unless you are ethernet bridging.
;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100
# Configure server mode for ethernet bridging
# using a DHCP-proxy, where clients talk
# to the OpenVPN server-side DHCP server
# to receive their IP address allocation
# and DNS server addresses. You must first use
# your OS's bridging capability to bridge the TAP
# interface with the ethernet NIC interface.
# Note: this mode only works on clients (such as
# Windows), where the client-side TAP adapter is
# bound to a DHCP client.
;server-bridge
# Push routes to the client to allow it
# to reach other private subnets behind
# the server. Remember that these
# private subnets will also need
# to know to route the OpenVPN client
# address pool (10.8.0.0/255.255.255.0)
# back to the OpenVPN server.
;push "route 192.168.10.0 255.255.255.0"
;push "route 192.168.20.0 255.255.255.0"
# To assign specific IP addresses to specific
# clients or if a connecting client has a private
# subnet behind it that should also have VPN access,
# use the subdirectory "ccd" for client-specific
# configuration files (see man page for more info).
# EXAMPLE: Suppose the client
# having the certificate common name "Thelonious"
# also has a small subnet behind his connecting
# machine, such as 192.168.40.128/255.255.255.248.
# First, uncomment out these lines:
;client-config-dir ccd
;route 192.168.40.128 255.255.255.248
# Then create a file ccd/Thelonious with this line:
# iroute 192.168.40.128 255.255.255.248
# This will allow Thelonious' private subnet to
# access the VPN. This example will only work
# if you are routing, not bridging, i.e. you are
# using "dev tun" and "server" directives.
# EXAMPLE: Suppose you want to give
# Thelonious a fixed VPN IP address of 10.9.0.1.
# First uncomment out these lines:
;client-config-dir ccd
;route 10.9.0.0 255.255.255.252
# Then add this line to ccd/Thelonious:
# ifconfig-push 10.9.0.1 10.9.0.2
# Suppose that you want to enable different
# firewall access policies for different groups
# of clients. There are two methods:
# (1) Run multiple OpenVPN daemons, one for each
# group, and firewall the TUN/TAP interface
# for each group/daemon appropriately.
# (2) (Advanced) Create a script to dynamically
# modify the firewall in response to access
# from different clients. See man
# page for more info on learn-address script.
;learn-address ./script
# If enabled, this directive will configure
# all clients to redirect their default
# network gateway through the VPN, causing
# all IP traffic such as web browsing and
# and DNS lookups to go through the VPN
# (The OpenVPN server machine may need to NAT
# or bridge the TUN/TAP interface to the internet
# in order for this to work properly).
push "redirect-gateway def1 bypass-dhcp"
# Certain Windows-specific network settings
# can be pushed to clients, such as DNS
# or WINS server addresses. CAVEAT:
# http://openvpn.net/faq.html#dhcpcaveats
# The addresses below refer to the public
# DNS servers provided by opendns.com.
push "dhcp-option DNS 10.8.0.1"
;push "dhcp-option DNS 208.67.220.220"
# Uncomment this directive to allow different
# clients to be able to "see" each other.
# By default, clients will only see the server.
# To force clients to only see the server, you
# will also need to appropriately firewall the
# server's TUN/TAP interface.
;client-to-client
# Uncomment this directive if multiple clients
# might connect with the same certificate/key
# files or common names. This is recommended
# only for testing purposes. For production use,
# each client should have its own certificate/key
# pair.
#
# IF YOU HAVE NOT GENERATED INDIVIDUAL
# CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
# EACH HAVING ITS OWN UNIQUE "COMMON NAME",
# UNCOMMENT THIS LINE OUT.
;duplicate-cn
# The keepalive directive causes ping-like
# messages to be sent back and forth over
# the link so that each side knows when
# the other side has gone down.
# Ping every 10 seconds, assume that remote
# peer is down if no ping received during
# a 120 second time period.
keepalive 10 120
##sha2 authorization
auth SHA512
##supported ciphers
tls-cipher TLS-ECDHE-RSA-WITH-AES-128-GCM-SHA256:TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256:TLS-ECDHE-RSA-WITH-AES-256-GCM-SHA384:TLS-DHE-RSA-WITH-AES-256-CBC-SHA256
##tls server
tls-server
##hand-window
;hand-window 120
##tls timeout
;tls-timeout=240
# For extra security beyond that provided
# by SSL/TLS, create an "HMAC firewall"
# to help block DoS attacks and UDP port flooding.
#
# Generate with:
# openvpn --genkey --secret ta.key
#
# The server and each client must have
# a copy of this key.
# The second parameter should be '0'
# on the server and '1' on the clients.
tls-auth ta.key 0 # This file is secret
# Select a cryptographic cipher.
# This config item must be copied to
# the client config file as well.
;cipher BF-CBC # Blowfish (default)
cipher AES-256-CBC # AES
;cipher DES-EDE3-CBC # Triple-DES
# Enable compression on the VPN link.
# If you enable it here, you must also
# enable it in the client config file.
comp-lzo
# The maximum number of concurrently connected
# clients we want to allow.
;max-clients 100
# It's a good idea to reduce the OpenVPN
# daemon's privileges after initialization.
#
# You can uncomment this out on
# non-Windows systems.
user nobody
group nogroup
# The persist options will try to avoid
# accessing certain resources on restart
# that may no longer be accessible because
# of the privilege downgrade.
persist-key
persist-tun
# Output a short status file showing
# current connections, truncated
# and rewritten every minute.
status openvpn-status.log
# By default, log messages will go to the syslog (or
# on Windows, if running as a service, they will go to
# the "\Program Files\OpenVPN\log" directory).
# Use log or log-append to override this default.
# "log" will truncate the log file on OpenVPN startup,
# while "log-append" will append to it. Use one
# or the other (but not both).
;log openvpn.log
;log-append openvpn.log
# Set the appropriate level of log
# file verbosity.
#
# 0 is silent, except for fatal errors
# 4 is reasonable for general usage
# 5 and 6 can help to debug connection problems
# 9 is extremely verbose
verb 5
# Silence repeating messages. At most 20
# sequential messages of the same message
# category will be output to the log.
;mute 20
Code: Select all
##############################################
# Sample client-side OpenVPN 2.0 config file #
# for connecting to multi-client server. #
# #
# This configuration can be used by multiple #
# clients, however each client should have #
# its own cert and key files. #
# #
# On Windows, you might want to rename this #
# file so it has a .ovpn extension #
##############################################
# Specify that we are a client and that we
# will be pulling certain config file directives
# from the server.
client
# Use the same setting as you are using on
# the server.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun
##Minimum tls version
tls-version-min 1.2
# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel
# if you have more than one. On XP SP2,
# you may need to disable the firewall
# for the TAP adapter.
;dev-node MyTap
# Are we connecting to a TCP or
# UDP server? Use the same setting as
# on the server.
;proto tcp
proto udp
# The hostname/IP and port of the server.
# You can have multiple remote entries
# to load balance between the servers.
remote temp-server 1194
# Choose a random host from the remote
# list for load-balancing. Otherwise
# try hosts in the order specified.
;remote-random
# Keep trying indefinitely to resolve the
# host name of the OpenVPN server. Very useful
# on machines which are not permanently connected
# to the internet such as laptops.
resolv-retry infinite
# Most clients don't need to bind to
# a specific local port number.
nobind
# Downgrade privileges after initialization (non-Windows only)
;user nobody
;group nogroup
# Try to preserve some state across restarts.
persist-key
persist-tun
# If you are connecting through an
# HTTP proxy to reach the actual OpenVPN
# server, put the proxy server/IP and
# port number here. See the man page
# if your proxy server requires
# authentication.
;http-proxy-retry # retry on connection failures
;http-proxy [proxy server] [proxy port #]
# Wireless networks often produce a lot
# of duplicate packets. Set this flag
# to silence duplicate packet warnings.
mute-replay-warnings
# SSL/TLS parms.
# See the server config file for more
# description. It's best to use
# a separate .crt/.key file pair
# for each client. A single ca
# file can be used for all clients.
ca ca.crt
cert harcong.crt
key harcong.key
##Remote certification tls web server authentication
remote-cert-eku "TLS Web Server Authentication"
##sha2 authorization
auth SHA512
##tls client
tls-client
##supported ciphers
tls-cipher TLS-ECDHE-RSA-WITH-AES-128-GCM-SHA256:TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256:TLS-ECDHE-RSA-WITH-AES-256-GCM-SHA384:TLS-DHE-RSA-WITH-AES-256-CBC-SHA256
# Verify server certificate by checking
# that the certicate has the nsCertType
# field set to "server". This is an
# important precaution to protect against
# a potential attack discussed here:
# http://openvpn.net/howto.html#mitm
#
# To use this feature, you will need to generate
# your server certificates with the nsCertType
# field set to "server". The build-key-server
# script in the easy-rsa folder will do this.
ns-cert-type server
##hand-window
;hand-window 120
##tls timeout
;tls-timeout=240
# If a tls-auth key is used on the server
# then every client must also have the key.
tls-auth ta.key 1
# Select a cryptographic cipher.
# If the cipher option is used on the server
# then you must also specify it here.
cipher AES-256-CBC # AES
# Enable compression on the VPN link.
# Don't enable this unless it is also
# enabled in the server config file.
comp-lzo
# Set log file verbosity.
verb 5
# Silence repeating messages
;mute 20
Code: Select all
Thu Jun 25 22:20:34 2015 us=875968 Current Parameter Settings:
Thu Jun 25 22:20:34 2015 us=875968 config = 'temp_vpn.ovpn'
Thu Jun 25 22:20:34 2015 us=875968 mode = 0
Thu Jun 25 22:20:34 2015 us=875968 show_ciphers = DISABLED
Thu Jun 25 22:20:34 2015 us=875968 show_digests = DISABLED
Thu Jun 25 22:20:34 2015 us=875968 show_engines = DISABLED
Thu Jun 25 22:20:34 2015 us=875968 genkey = DISABLED
Thu Jun 25 22:20:34 2015 us=875968 key_pass_file = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=875968 show_tls_ciphers = DISABLED
Thu Jun 25 22:20:34 2015 us=875968 Connection profiles [default]:
Thu Jun 25 22:20:34 2015 us=875968 proto = udp
Thu Jun 25 22:20:34 2015 us=875968 local = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=875968 local_port = 0
Thu Jun 25 22:20:34 2015 us=875968 remote = 'temp-server'
Thu Jun 25 22:20:34 2015 us=875968 remote_port = 1194
Thu Jun 25 22:20:34 2015 us=875968 remote_float = DISABLED
Thu Jun 25 22:20:34 2015 us=875968 bind_defined = DISABLED
Thu Jun 25 22:20:34 2015 us=875968 bind_local = DISABLED
Thu Jun 25 22:20:34 2015 us=875968 connect_retry_seconds = 5
Thu Jun 25 22:20:34 2015 us=875968 connect_timeout = 10
Thu Jun 25 22:20:34 2015 us=875968 connect_retry_max = 0
Thu Jun 25 22:20:34 2015 us=875968 socks_proxy_server = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=875968 socks_proxy_port = 0
Thu Jun 25 22:20:34 2015 us=875968 socks_proxy_retry = DISABLED
Thu Jun 25 22:20:34 2015 us=875968 tun_mtu = 1500
Thu Jun 25 22:20:34 2015 us=875968 tun_mtu_defined = ENABLED
Thu Jun 25 22:20:34 2015 us=875968 link_mtu = 1500
Thu Jun 25 22:20:34 2015 us=875968 link_mtu_defined = DISABLED
Thu Jun 25 22:20:34 2015 us=875968 tun_mtu_extra = 0
Thu Jun 25 22:20:34 2015 us=875968 tun_mtu_extra_defined = DISABLED
Thu Jun 25 22:20:34 2015 us=875968 mtu_discover_type = -1
Thu Jun 25 22:20:34 2015 us=875968 fragment = 0
Thu Jun 25 22:20:34 2015 us=875968 mssfix = 1450
Thu Jun 25 22:20:34 2015 us=875968 explicit_exit_notification = 0
Thu Jun 25 22:20:34 2015 us=875968 Connection profiles END
Thu Jun 25 22:20:34 2015 us=875968 remote_random = DISABLED
Thu Jun 25 22:20:34 2015 us=875968 ipchange = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=875968 dev = 'tun'
Thu Jun 25 22:20:34 2015 us=875968 dev_type = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=875968 dev_node = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=875968 lladdr = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=875968 topology = 1
Thu Jun 25 22:20:34 2015 us=875968 tun_ipv6 = DISABLED
Thu Jun 25 22:20:34 2015 us=875968 ifconfig_local = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=875968 ifconfig_remote_netmask = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=875968 ifconfig_noexec = DISABLED
Thu Jun 25 22:20:34 2015 us=875968 ifconfig_nowarn = DISABLED
Thu Jun 25 22:20:34 2015 us=875968 ifconfig_ipv6_local = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=875968 ifconfig_ipv6_netbits = 0
Thu Jun 25 22:20:34 2015 us=875968 ifconfig_ipv6_remote = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 shaper = 0
Thu Jun 25 22:20:34 2015 us=876968 mtu_test = 0
Thu Jun 25 22:20:34 2015 us=876968 mlock = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 keepalive_ping = 0
Thu Jun 25 22:20:34 2015 us=876968 keepalive_timeout = 0
Thu Jun 25 22:20:34 2015 us=876968 inactivity_timeout = 0
Thu Jun 25 22:20:34 2015 us=876968 ping_send_timeout = 0
Thu Jun 25 22:20:34 2015 us=876968 ping_rec_timeout = 0
Thu Jun 25 22:20:34 2015 us=876968 ping_rec_timeout_action = 0
Thu Jun 25 22:20:34 2015 us=876968 ping_timer_remote = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 remap_sigusr1 = 0
Thu Jun 25 22:20:34 2015 us=876968 persist_tun = ENABLED
Thu Jun 25 22:20:34 2015 us=876968 persist_local_ip = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 persist_remote_ip = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 persist_key = ENABLED
Thu Jun 25 22:20:34 2015 us=876968 passtos = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 resolve_retry_seconds = 1000000000
Thu Jun 25 22:20:34 2015 us=876968 username = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 groupname = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 chroot_dir = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 cd_dir = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 writepid = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 up_script = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 down_script = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 down_pre = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 up_restart = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 up_delay = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 daemon = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 inetd = 0
Thu Jun 25 22:20:34 2015 us=876968 log = ENABLED
Thu Jun 25 22:20:34 2015 us=876968 suppress_timestamps = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 nice = 0
Thu Jun 25 22:20:34 2015 us=876968 verbosity = 5
Thu Jun 25 22:20:34 2015 us=876968 mute = 0
Thu Jun 25 22:20:34 2015 us=876968 status_file = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 status_file_version = 1
Thu Jun 25 22:20:34 2015 us=876968 status_file_update_freq = 60
Thu Jun 25 22:20:34 2015 us=876968 occ = ENABLED
Thu Jun 25 22:20:34 2015 us=876968 rcvbuf = 0
Thu Jun 25 22:20:34 2015 us=876968 sndbuf = 0
Thu Jun 25 22:20:34 2015 us=876968 sockflags = 0
Thu Jun 25 22:20:34 2015 us=876968 fast_io = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 lzo = 7
Thu Jun 25 22:20:34 2015 us=876968 route_script = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 route_default_gateway = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 route_default_metric = 0
Thu Jun 25 22:20:34 2015 us=876968 route_noexec = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 route_delay = 5
Thu Jun 25 22:20:34 2015 us=876968 route_delay_window = 30
Thu Jun 25 22:20:34 2015 us=876968 route_delay_defined = ENABLED
Thu Jun 25 22:20:34 2015 us=876968 route_nopull = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 route_gateway_via_dhcp = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 max_routes = 100
Thu Jun 25 22:20:34 2015 us=876968 allow_pull_fqdn = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 management_addr = '127.0.0.1'
Thu Jun 25 22:20:34 2015 us=876968 management_port = 25340
Thu Jun 25 22:20:34 2015 us=876968 management_user_pass = 'stdin'
Thu Jun 25 22:20:34 2015 us=876968 management_log_history_cache = 250
Thu Jun 25 22:20:34 2015 us=876968 management_echo_buffer_size = 100
Thu Jun 25 22:20:34 2015 us=876968 management_write_peer_info_file = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 management_client_user = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 management_client_group = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 management_flags = 6
Thu Jun 25 22:20:34 2015 us=876968 shared_secret_file = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 key_direction = 2
Thu Jun 25 22:20:34 2015 us=876968 ciphername_defined = ENABLED
Thu Jun 25 22:20:34 2015 us=876968 ciphername = 'AES-256-CBC'
Thu Jun 25 22:20:34 2015 us=876968 authname_defined = ENABLED
Thu Jun 25 22:20:34 2015 us=876968 authname = 'SHA512'
Thu Jun 25 22:20:34 2015 us=876968 prng_hash = 'SHA1'
Thu Jun 25 22:20:34 2015 us=876968 prng_nonce_secret_len = 16
Thu Jun 25 22:20:34 2015 us=876968 keysize = 0
Thu Jun 25 22:20:34 2015 us=876968 engine = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 replay = ENABLED
Thu Jun 25 22:20:34 2015 us=876968 mute_replay_warnings = ENABLED
Thu Jun 25 22:20:34 2015 us=876968 replay_window = 64
Thu Jun 25 22:20:34 2015 us=876968 replay_time = 15
Thu Jun 25 22:20:34 2015 us=876968 packet_id_file = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 use_iv = ENABLED
Thu Jun 25 22:20:34 2015 us=876968 test_crypto = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 tls_server = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 tls_client = ENABLED
Thu Jun 25 22:20:34 2015 us=876968 key_method = 2
Thu Jun 25 22:20:34 2015 us=876968 ca_file = 'ca.crt'
Thu Jun 25 22:20:34 2015 us=876968 ca_path = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 dh_file = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 cert_file = 'harcong.crt'
Thu Jun 25 22:20:34 2015 us=876968 priv_key_file = 'harcong.key'
Thu Jun 25 22:20:34 2015 us=876968 pkcs12_file = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 cryptoapi_cert = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 cipher_list = 'TLS-ECDHE-RSA-WITH-AES-128-GCM-SHA256:TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256:TLS-ECDHE-RSA-WITH-AES-256-GCM-SHA384:TLS-DHE-RSA-WITH-AES-256-CBC-SHA256'
Thu Jun 25 22:20:34 2015 us=876968 tls_verify = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 tls_export_cert = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 verify_x509_type = 0
Thu Jun 25 22:20:34 2015 us=876968 verify_x509_name = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 crl_file = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 ns_cert_type = 1
Thu Jun 25 22:20:34 2015 us=876968 remote_cert_ku[i] = 0
Thu Jun 25 22:20:34 2015 us=876968 remote_cert_ku[i] = 0
Thu Jun 25 22:20:34 2015 us=876968 remote_cert_ku[i] = 0
Thu Jun 25 22:20:34 2015 us=876968 remote_cert_ku[i] = 0
Thu Jun 25 22:20:34 2015 us=876968 remote_cert_ku[i] = 0
Thu Jun 25 22:20:34 2015 us=876968 remote_cert_ku[i] = 0
Thu Jun 25 22:20:34 2015 us=876968 remote_cert_ku[i] = 0
Thu Jun 25 22:20:34 2015 us=876968 remote_cert_ku[i] = 0
Thu Jun 25 22:20:34 2015 us=876968 remote_cert_ku[i] = 0
Thu Jun 25 22:20:34 2015 us=876968 remote_cert_ku[i] = 0
Thu Jun 25 22:20:34 2015 us=876968 remote_cert_ku[i] = 0
Thu Jun 25 22:20:34 2015 us=876968 remote_cert_ku[i] = 0
Thu Jun 25 22:20:34 2015 us=876968 remote_cert_ku[i] = 0
Thu Jun 25 22:20:34 2015 us=876968 remote_cert_ku[i] = 0
Thu Jun 25 22:20:34 2015 us=876968 remote_cert_ku[i] = 0
Thu Jun 25 22:20:34 2015 us=876968 remote_cert_ku[i] = 0
Thu Jun 25 22:20:34 2015 us=876968 remote_cert_eku = 'TLS Web Server Authentication'
Thu Jun 25 22:20:34 2015 us=876968 ssl_flags = 192
Thu Jun 25 22:20:34 2015 us=876968 tls_timeout = 2
Thu Jun 25 22:20:34 2015 us=876968 renegotiate_bytes = 0
Thu Jun 25 22:20:34 2015 us=876968 renegotiate_packets = 0
Thu Jun 25 22:20:34 2015 us=876968 renegotiate_seconds = 3600
Thu Jun 25 22:20:34 2015 us=876968 handshake_window = 60
Thu Jun 25 22:20:34 2015 us=876968 transition_window = 3600
Thu Jun 25 22:20:34 2015 us=876968 single_session = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 push_peer_info = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 tls_exit = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 tls_auth_file = 'ta.key'
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_protected_authentication = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_protected_authentication = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_protected_authentication = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_protected_authentication = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_protected_authentication = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_protected_authentication = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_protected_authentication = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_protected_authentication = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_protected_authentication = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_protected_authentication = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_protected_authentication = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_protected_authentication = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_protected_authentication = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_protected_authentication = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_protected_authentication = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_protected_authentication = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_private_mode = 00000000
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_private_mode = 00000000
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_private_mode = 00000000
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_private_mode = 00000000
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_private_mode = 00000000
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_private_mode = 00000000
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_private_mode = 00000000
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_private_mode = 00000000
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_private_mode = 00000000
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_private_mode = 00000000
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_private_mode = 00000000
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_private_mode = 00000000
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_private_mode = 00000000
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_private_mode = 00000000
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_private_mode = 00000000
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_private_mode = 00000000
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_cert_private = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_cert_private = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_cert_private = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_cert_private = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_cert_private = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_cert_private = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_cert_private = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_cert_private = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_cert_private = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_cert_private = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_cert_private = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_cert_private = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_cert_private = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_cert_private = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_cert_private = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_cert_private = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_pin_cache_period = -1
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_id = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 pkcs11_id_management = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 server_network = 0.0.0.0
Thu Jun 25 22:20:34 2015 us=876968 server_netmask = 0.0.0.0
Thu Jun 25 22:20:34 2015 us=876968 server_network_ipv6 = ::
Thu Jun 25 22:20:34 2015 us=876968 server_netbits_ipv6 = 0
Thu Jun 25 22:20:34 2015 us=876968 server_bridge_ip = 0.0.0.0
Thu Jun 25 22:20:34 2015 us=876968 server_bridge_netmask = 0.0.0.0
Thu Jun 25 22:20:34 2015 us=876968 server_bridge_pool_start = 0.0.0.0
Thu Jun 25 22:20:34 2015 us=876968 server_bridge_pool_end = 0.0.0.0
Thu Jun 25 22:20:34 2015 us=876968 ifconfig_pool_defined = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 ifconfig_pool_start = 0.0.0.0
Thu Jun 25 22:20:34 2015 us=876968 ifconfig_pool_end = 0.0.0.0
Thu Jun 25 22:20:34 2015 us=876968 ifconfig_pool_netmask = 0.0.0.0
Thu Jun 25 22:20:34 2015 us=876968 ifconfig_pool_persist_filename = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 ifconfig_pool_persist_refresh_freq = 600
Thu Jun 25 22:20:34 2015 us=876968 ifconfig_ipv6_pool_defined = DISABLED
Thu Jun 25 22:20:34 2015 us=876968 ifconfig_ipv6_pool_base = ::
Thu Jun 25 22:20:34 2015 us=876968 ifconfig_ipv6_pool_netbits = 0
Thu Jun 25 22:20:34 2015 us=876968 n_bcast_buf = 256
Thu Jun 25 22:20:34 2015 us=876968 tcp_queue_limit = 64
Thu Jun 25 22:20:34 2015 us=876968 real_hash_size = 256
Thu Jun 25 22:20:34 2015 us=876968 virtual_hash_size = 256
Thu Jun 25 22:20:34 2015 us=876968 client_connect_script = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 learn_address_script = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 client_disconnect_script = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 client_config_dir = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=876968 ccd_exclusive = DISABLED
Thu Jun 25 22:20:34 2015 us=877968 tmp_dir = 'C:\Users\ADMINI~1\AppData\Local\Temp\'
Thu Jun 25 22:20:34 2015 us=877968 push_ifconfig_defined = DISABLED
Thu Jun 25 22:20:34 2015 us=877968 push_ifconfig_local = 0.0.0.0
Thu Jun 25 22:20:34 2015 us=877968 push_ifconfig_remote_netmask = 0.0.0.0
Thu Jun 25 22:20:34 2015 us=877968 push_ifconfig_ipv6_defined = DISABLED
Thu Jun 25 22:20:34 2015 us=877968 push_ifconfig_ipv6_local = ::/0
Thu Jun 25 22:20:34 2015 us=877968 push_ifconfig_ipv6_remote = ::
Thu Jun 25 22:20:34 2015 us=877968 enable_c2c = DISABLED
Thu Jun 25 22:20:34 2015 us=877968 duplicate_cn = DISABLED
Thu Jun 25 22:20:34 2015 us=877968 cf_max = 0
Thu Jun 25 22:20:34 2015 us=877968 cf_per = 0
Thu Jun 25 22:20:34 2015 us=877968 max_clients = 1024
Thu Jun 25 22:20:34 2015 us=877968 max_routes_per_client = 256
Thu Jun 25 22:20:34 2015 us=877968 auth_user_pass_verify_script = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=877968 auth_user_pass_verify_script_via_file = DISABLED
Thu Jun 25 22:20:34 2015 us=877968 client = ENABLED
Thu Jun 25 22:20:34 2015 us=877968 pull = ENABLED
Thu Jun 25 22:20:34 2015 us=877968 auth_user_pass_file = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=877968 show_net_up = DISABLED
Thu Jun 25 22:20:34 2015 us=877968 route_method = 0
Thu Jun 25 22:20:34 2015 us=877968 ip_win32_defined = DISABLED
Thu Jun 25 22:20:34 2015 us=877968 ip_win32_type = 3
Thu Jun 25 22:20:34 2015 us=877968 dhcp_masq_offset = 0
Thu Jun 25 22:20:34 2015 us=877968 dhcp_lease_time = 31536000
Thu Jun 25 22:20:34 2015 us=877968 tap_sleep = 0
Thu Jun 25 22:20:34 2015 us=877968 dhcp_options = DISABLED
Thu Jun 25 22:20:34 2015 us=877968 dhcp_renew = DISABLED
Thu Jun 25 22:20:34 2015 us=877968 dhcp_pre_release = DISABLED
Thu Jun 25 22:20:34 2015 us=877968 dhcp_release = DISABLED
Thu Jun 25 22:20:34 2015 us=877968 domain = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=877968 netbios_scope = '[UNDEF]'
Thu Jun 25 22:20:34 2015 us=877968 netbios_node_type = 0
Thu Jun 25 22:20:34 2015 us=877968 disable_nbt = DISABLED
Thu Jun 25 22:20:34 2015 us=877968 OpenVPN 2.3.6 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [PKCS11] [IPv6] built on Mar 19 2015
Thu Jun 25 22:20:34 2015 us=877968 library versions: OpenSSL 1.0.1m 19 Mar 2015, LZO 2.08
Enter Management Password:
Thu Jun 25 22:20:34 2015 us=877968 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:25340
Thu Jun 25 22:20:34 2015 us=877968 Need hold release from management interface, waiting...
Thu Jun 25 22:20:35 2015 us=369996 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:25340
Thu Jun 25 22:20:35 2015 us=471002 MANAGEMENT: CMD 'state on'
Thu Jun 25 22:20:35 2015 us=471002 MANAGEMENT: CMD 'log all on'
Thu Jun 25 22:20:35 2015 us=544006 MANAGEMENT: CMD 'hold off'
Thu Jun 25 22:20:35 2015 us=544006 MANAGEMENT: CMD 'hold release'
Thu Jun 25 22:20:35 2015 us=622011 Control Channel Authentication: using 'ta.key' as a OpenVPN static key file
Thu Jun 25 22:20:35 2015 us=622011 Outgoing Control Channel Authentication: Using 512 bit message hash 'SHA512' for HMAC authentication
Thu Jun 25 22:20:35 2015 us=622011 Incoming Control Channel Authentication: Using 512 bit message hash 'SHA512' for HMAC authentication
Thu Jun 25 22:20:35 2015 us=622011 LZO compression initialized
Thu Jun 25 22:20:35 2015 us=622011 Control Channel MTU parms [ L:1602 D:210 EF:110 EB:0 ET:0 EL:0 ]
Thu Jun 25 22:20:35 2015 us=622011 Socket Buffers: R=[8192->8192] S=[8192->8192]
Thu Jun 25 22:20:35 2015 us=622011 MANAGEMENT: >STATE:1435285235,RESOLVE,,,
Thu Jun 25 22:20:35 2015 us=623011 Data Channel MTU parms [ L:1602 D:1450 EF:102 EB:135 ET:0 EL:0 AF:3/1 ]
Thu Jun 25 22:20:35 2015 us=623011 Local Options String: 'V4,dev-type tun,link-mtu 1602,tun-mtu 1500,proto UDPv4,comp-lzo,keydir 1,cipher AES-256-CBC,auth SHA512,keysize 256,tls-auth,key-method 2,tls-client'
Thu Jun 25 22:20:35 2015 us=623011 Expected Remote Options String: 'V4,dev-type tun,link-mtu 1602,tun-mtu 1500,proto UDPv4,comp-lzo,keydir 0,cipher AES-256-CBC,auth SHA512,keysize 256,tls-auth,key-method 2,tls-server'
Thu Jun 25 22:20:35 2015 us=624011 Local Options hash (VER=V4): 'a5d50645'
Thu Jun 25 22:20:35 2015 us=624011 Expected Remote Options hash (VER=V4): '14d315e7'
Thu Jun 25 22:20:35 2015 us=624011 UDPv4 link local: [undef]
Thu Jun 25 22:20:35 2015 us=624011 UDPv4 link remote: [AF_INET]192.168.1.79:1194
Thu Jun 25 22:20:35 2015 us=624011 MANAGEMENT: >STATE:1435285235,WAIT,,,
Thu Jun 25 22:20:35 2015 us=713016 MANAGEMENT: >STATE:1435285235,AUTH,,,
Thu Jun 25 22:20:35 2015 us=713016 TLS: Initial packet from [AF_INET]192.168.1.79:1194, sid=375a47cf 96da7561
Thu Jun 25 22:20:37 2015 us=436114 VERIFY OK: depth=1, C=US, ST=AK, L=Juneau, O=temp.net, OU=temp_vpn, CN=temp.net CA, name=server, emailAddress=admin@temp.net
Thu Jun 25 22:20:37 2015 us=437115 VERIFY OK: nsCertType=SERVER
Thu Jun 25 22:20:37 2015 us=437115 Validating certificate extended key usage
Thu Jun 25 22:20:37 2015 us=437115 ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication
Thu Jun 25 22:20:37 2015 us=437115 VERIFY EKU OK
Thu Jun 25 22:20:37 2015 us=437115 VERIFY OK: depth=0, C=US, ST=AK, L=Juneau, O=temp.net, OU=temp_vpn, CN=server, name=server, emailAddress=admin@temp.net
Thu Jun 25 22:21:35 2015 us=637443 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
Thu Jun 25 22:21:35 2015 us=637443 TLS Error: TLS handshake failed
Thu Jun 25 22:21:35 2015 us=637443 TCP/UDP: Closing socket
Thu Jun 25 22:21:35 2015 us=637443 SIGUSR1[soft,tls-error] received, process restarting
Thu Jun 25 22:21:35 2015 us=638443 MANAGEMENT: >STATE:1435285295,RECONNECTING,tls-error,,
Thu Jun 25 22:21:35 2015 us=638443 Restart pause, 2 second(s)
Thu Jun 25 22:21:37 2015 us=638558 Re-using SSL/TLS context
Thu Jun 25 22:21:37 2015 us=638558 LZO compression initialized
Thu Jun 25 22:21:37 2015 us=638558 Control Channel MTU parms [ L:1602 D:210 EF:110 EB:0 ET:0 EL:0 ]
Thu Jun 25 22:21:37 2015 us=638558 Socket Buffers: R=[8192->8192] S=[8192->8192]
Thu Jun 25 22:21:37 2015 us=638558 MANAGEMENT: >STATE:1435285297,RESOLVE,,,
Thu Jun 25 22:21:37 2015 us=639558 Data Channel MTU parms [ L:1602 D:1450 EF:102 EB:135 ET:0 EL:0 AF:3/1 ]
Thu Jun 25 22:21:37 2015 us=639558 Local Options String: 'V4,dev-type tun,link-mtu 1602,tun-mtu 1500,proto UDPv4,comp-lzo,keydir 1,cipher AES-256-CBC,auth SHA512,keysize 256,tls-auth,key-method 2,tls-client'
Thu Jun 25 22:21:37 2015 us=639558 Expected Remote Options String: 'V4,dev-type tun,link-mtu 1602,tun-mtu 1500,proto UDPv4,comp-lzo,keydir 0,cipher AES-256-CBC,auth SHA512,keysize 256,tls-auth,key-method 2,tls-server'
Thu Jun 25 22:21:37 2015 us=639558 Local Options hash (VER=V4): 'a5d50645'
Thu Jun 25 22:21:37 2015 us=639558 Expected Remote Options hash (VER=V4): '14d315e7'
Thu Jun 25 22:21:37 2015 us=639558 UDPv4 link local: [undef]
Thu Jun 25 22:21:37 2015 us=639558 UDPv4 link remote: [AF_INET]192.168.1.79:1194
Thu Jun 25 22:21:37 2015 us=639558 MANAGEMENT: >STATE:1435285297,WAIT,,,
Thu Jun 25 22:21:37 2015 us=644558 MANAGEMENT: >STATE:1435285297,AUTH,,,
Thu Jun 25 22:21:37 2015 us=644558 TLS: Initial packet from [AF_INET]192.168.1.79:1194, sid=0a64280e d01ce89c
Thu Jun 25 22:21:38 2015 us=292595 TCP/UDP: Closing socket
Thu Jun 25 22:21:38 2015 us=292595 SIGTERM[hard,] received, process exiting
Thu Jun 25 22:21:38 2015 us=292595 MANAGEMENT: >STATE:1435285298,EXITING,SIGTERM,,
<..>
Put simply, what do wrong?