OpenVPN Support Forum

Community Support Forum
https://forums.openvpn.net/

openvpn wont start, zero output

https://forums.openvpn.net/viewtopic.php?t=18781

Page 1 of 1

openvpn wont start, zero output

Posted: Tue May 05, 2015 8:03 am
by newuser44

Code: Select all

openvpn --config quadcore.conf --verb 9

running:

Code: Select all

strace openvpn --config quadcore.conf --verb 9 2>error.openvpn
results in a 7000+ lines error log in under 15s.
here are the first few pages, as you can see it kinda keeps listing "/etc/localtime"
i dont know if this helps, but this is as far as my linux knowledge goes

Code: Select all

execve("/usr/sbin/openvpn", ["openvpn", "--config", "quadcore.conf", "--verb", "9"], [/* 39 vars */]) = 0
brk(0)                                  = 0x7f9bf5e5e000
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9bf5465000
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=93885, ...}) = 0
mmap(NULL, 93885, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f9bf544e000
close(3)                                = 0
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
open("/lib/x86_64-linux-gnu/libnsl.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`A\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0644, st_size=89104, ...}) = 0
mmap(NULL, 2194072, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9bf502f000
mprotect(0x7f9bf5044000, 2093056, PROT_NONE) = 0
mmap(0x7f9bf5243000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x14000) = 0x7f9bf5243000
mmap(0x7f9bf5245000, 6808, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f9bf5245000
close(3)                                = 0
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
open("/lib/x86_64-linux-gnu/libresolv.so.2", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\220:\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0644, st_size=84856, ...}) = 0
mmap(NULL, 2189928, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9bf4e18000
mprotect(0x7f9bf4e2c000, 2093056, PROT_NONE) = 0
mmap(0x7f9bf502b000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x13000) = 0x7f9bf502b000
mmap(0x7f9bf502d000, 6760, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f9bf502d000
close(3)                                = 0
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
open("/lib/x86_64-linux-gnu/liblzo2.so.2", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0&\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0644, st_size=137296, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9bf544d000
mmap(NULL, 2232560, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9bf4bf6000
mprotect(0x7f9bf4c17000, 2093056, PROT_NONE) = 0
mmap(0x7f9bf4e16000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x20000) = 0x7f9bf4e16000
close(3)                                = 0
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
open("/lib/x86_64-linux-gnu/libpthread.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\20o\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=137440, ...}) = 0
mmap(NULL, 2213008, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9bf49d9000
mprotect(0x7f9bf49f1000, 2093056, PROT_NONE) = 0
mmap(0x7f9bf4bf0000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x17000) = 0x7f9bf4bf0000
mmap(0x7f9bf4bf2000, 13456, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f9bf4bf2000
close(3)                                = 0
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
open("/usr/lib/x86_64-linux-gnu/libpkcs11-helper.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0 3\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0644, st_size=109464, ...}) = 0
mmap(NULL, 2205024, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9bf47be000
mprotect(0x7f9bf47d8000, 2093056, PROT_NONE) = 0
mmap(0x7f9bf49d7000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x19000) = 0x7f9bf49d7000
close(3)                                = 0
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
open("/usr/lib/x86_64-linux-gnu/libssl.so.1.0.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200=\1\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0644, st_size=392296, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9bf544c000
mmap(NULL, 2487664, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9bf455e000
mprotect(0x7f9bf45b4000, 2097152, PROT_NONE) = 0
mmap(0x7f9bf47b4000, 40960, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x56000) = 0x7f9bf47b4000
close(3)                                = 0
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
open("/usr/lib/x86_64-linux-gnu/libcrypto.so.1.0.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\"\7\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0644, st_size=2062720, ...}) = 0
mmap(NULL, 4172728, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9bf4163000
mprotect(0x7f9bf432e000, 2097152, PROT_NONE) = 0
mmap(0x7f9bf452e000, 184320, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1cb000) = 0x7f9bf452e000
mmap(0x7f9bf455b000, 11192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f9bf455b000
close(3)                                = 0
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
open("/lib/x86_64-linux-gnu/libdl.so.2", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\320\16\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0644, st_size=14664, ...}) = 0
mmap(NULL, 2109712, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9bf3f5f000
mprotect(0x7f9bf3f62000, 2093056, PROT_NONE) = 0
mmap(0x7f9bf4161000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f9bf4161000
close(3)                                = 0
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
open("/lib/x86_64-linux-gnu/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0P\34\2\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1729984, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9bf544b000
mmap(NULL, 3836448, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9bf3bb6000
mprotect(0x7f9bf3d55000, 2097152, PROT_NONE) = 0
mmap(0x7f9bf3f55000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x19f000) = 0x7f9bf3f55000
mmap(0x7f9bf3f5b000, 14880, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f9bf3f5b000
close(3)                                = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9bf544a000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9bf5449000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9bf5448000
arch_prctl(ARCH_SET_FS, 0x7f9bf5449700) = 0
mprotect(0x7f9bf3f55000, 16384, PROT_READ) = 0
mprotect(0x7f9bf4161000, 4096, PROT_READ) = 0
mprotect(0x7f9bf452e000, 118784, PROT_READ) = 0
mprotect(0x7f9bf47b4000, 12288, PROT_READ) = 0
mprotect(0x7f9bf4bf0000, 4096, PROT_READ) = 0
mprotect(0x7f9bf49d7000, 4096, PROT_READ) = 0
mprotect(0x7f9bf4e16000, 4096, PROT_READ) = 0
mprotect(0x7f9bf502b000, 4096, PROT_READ) = 0
mprotect(0x7f9bf5243000, 4096, PROT_READ) = 0
mprotect(0x7f9bf570e000, 8192, PROT_READ) = 0
mprotect(0x7f9bf5467000, 4096, PROT_READ) = 0
munmap(0x7f9bf544e000, 93885)           = 0
set_tid_address(0x7f9bf54499d0)         = 2598
set_robust_list(0x7f9bf54499e0, 24)     = 0
rt_sigaction(SIGRTMIN, {0x7f9bf49df9f0, [], SA_RESTORER|SA_SIGINFO, 0x7f9bf49e88d0}, NULL, 8) = 0
rt_sigaction(SIGRT_1, {0x7f9bf49dfa80, [], SA_RESTORER|SA_RESTART|SA_SIGINFO, 0x7f9bf49e88d0}, NULL, 8) = 0
rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM64_INFINITY}) = 0
brk(0)                                  = 0x7f9bf5e5e000
brk(0x7f9bf5e7f000)                     = 0x7f9bf5e7f000
rt_sigaction(SIGINT, {0x7f9bf54c6bf0, [INT], SA_RESTORER|SA_RESTART, 0x7f9bf3beb180}, {SIG_DFL, [], 0}, 8) = 0
rt_sigaction(SIGTERM, {0x7f9bf54c6bf0, [TERM], SA_RESTORER|SA_RESTART, 0x7f9bf3beb180}, {SIG_DFL, [], 0}, 8) = 0
rt_sigaction(SIGHUP, {SIG_IGN, [HUP], SA_RESTORER|SA_RESTART, 0x7f9bf3beb180}, {SIG_DFL, [], 0}, 8) = 0
rt_sigaction(SIGUSR1, {SIG_IGN, [USR1], SA_RESTORER|SA_RESTART, 0x7f9bf3beb180}, {SIG_DFL, [], 0}, 8) = 0
rt_sigaction(SIGUSR2, {SIG_IGN, [USR2], SA_RESTORER|SA_RESTART, 0x7f9bf3beb180}, {SIG_DFL, [], 0}, 8) = 0
rt_sigaction(SIGPIPE, {SIG_IGN, [PIPE], SA_RESTORER|SA_RESTART, 0x7f9bf3beb180}, {SIG_DFL, [], 0}, 8) = 0
brk(0x7f9bf5ea0000)                     = 0x7f9bf5ea0000
open("quadcore.conf", O_RDONLY)         = 3
fstat(3, {st_mode=S_IFREG|0700, st_size=203, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9bf5464000
read(3, "client\ndev tun\nproto udp\nremote "..., 4096) = 203
open("quadcore.log", O_WRONLY|O_CREAT|O_APPEND, 0600) = 4
dup2(4, 1)                              = 1
dup2(4, 2)                              = 2
close(4)                                = 0
read(3, "", 4096)                       = 0
close(3)                                = 0
munmap(0x7f9bf5464000, 4096)            = 0
access("ca.crt", R_OK)                  = 0
access("quadcore.crt", R_OK)            = 0
access("quadcore.key", R_OK)            = 0
access("/tmp", R_OK|W_OK|X_OK)          = 0
open("/etc/localtime", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
fstat(3, {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9bf5464000
read(3, "TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\10\0\0\0\10\0\0\0\0"..., 4096) = 2309
lseek(3, -1467, SEEK_CUR)               = 842
read(3, "TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\t\0\0\0\t\0\0\0\0"..., 4096) = 1467
close(3)                                = 0
munmap(0x7f9bf5464000, 4096)            = 0
fstat(1, {st_mode=S_IFREG|0600, st_size=6810621, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9bf5464000
write(1, "Tue May  5 09:52:34 2015 us=8429"..., 63) = 63
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8433"..., 62) = 62
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8434"..., 46) = 46
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8435"..., 63) = 63
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8435"..., 54) = 54
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8436"..., 61) = 61
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8437"..., 61) = 61
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8438"..., 61) = 61
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8438"..., 55) = 55
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8439"..., 63) = 63
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8440"..., 65) = 65
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8440"..., 66) = 66
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8441"..., 49) = 49
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8442"..., 55) = 55
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8443"..., 52) = 52
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8443"..., 58) = 58
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8444"..., 56) = 56
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8445"..., 61) = 61
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8446"..., 61) = 61
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8446"..., 59) = 59
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8447"..., 63) = 63
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8448"..., 58) = 58
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8448"..., 59) = 59
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8449"..., 68) = 68
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8450"..., 58) = 58
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8451"..., 66) = 66
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8451"..., 52) = 52
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8452"..., 63) = 63
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8453"..., 53) = 53
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8453"..., 65) = 65
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2309, ...}) = 0
write(1, "Tue May  5 09:52:34 2015 us=8454"..., 55) = 55



no ccd file

server conf

Code: Select all

log-append  openvpn-andromeda.log
port 1194
proto udp
dev tun
dh dh1024.pem
ca ca.crt
cert andromeda.crt
key andromeda.key 
ifconfig-pool-persist ipp.txt
client-config-dir ccd
keepalive 10 120
comp-lzo
persist-key
persist-tun
verb 4
server 10.8.33.0 255.255.255.0
client-to-client
status openvpn-status.log
route 192.168.178.0 255.255.255.0
route 192.168.1.0 255.255.255.0
push "route 192.168.1.0 255.255.255.0"

client config

Code: Select all

client
dev tun
proto udp
remote andromeda 1194
resolv-retry infinite
nobind
persist-key
persist-tun
ca ca.crt
cert quadcore.crt
key quadcore.key
comp-lzo
verb 3
keepalive 10 120
log-append quadcore.log

Code: Select all

cat /etc/debian_version 
8.0
openvpn was installed from the default debian repos

Code: Select all

openvpn --version
OpenVPN 2.3.4 x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [EPOLL] [PKCS11] [MH] [IPv6] built on Dec  1 2014
library versions: OpenSSL 1.0.1k 8 Jan 2015, LZO 2.08
Originally developed by James Yonan
Copyright (C) 2002-2010 OpenVPN Technologies, Inc. <sales@openvpn.net>
Compile time defines: enable_crypto=yes enable_debug=yes enable_def_auth=yes enable_dependency_tracking=no enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown enable_fast_install=yes enable_fragment=yes enable_http_proxy=yes enable_iproute2=yes enable_libtool_lock=yes enable_lzo=yes enable_lzo_stub=no enable_maintainer_mode=no enable_management=yes enable_multi=yes enable_multihome=yes enable_pam_dlopen=no enable_password_save=yes enable_pedantic=no enable_pf=yes enable_pkcs11=yes enable_plugin_auth_pam=yes enable_plugin_down_root=yes enable_plugins=yes enable_port_share=yes enable_selinux=no enable_server=yes enable_shared=yes enable_shared_with_static_runtimes=no enable_small=no enable_socks=yes enable_ssl=yes enable_static=yes enable_strict=no enable_strict_options=no enable_systemd=yes enable_win32_dll=yes enable_x509_alt_username=yes with_crypto_library=openssl with_gnu_ld=yes with_ifconfig_path=/sbin/ifconfig with_iproute_path=/sbin/ip with_mem_check=no with_plugindir='${prefix}/lib/openvpn' with_route_path=/sbin/route with_sysroot=no
git revision: refs/heads/jessie/b35ad09bfc4a26e7

Re: openvpn wont start, zero output

Posted: Tue May 05, 2015 9:36 am
by Traffic
newuser44 wrote:server conf
Code:
log-append openvpn-andromeda.log
did you check this log file ?
newuser44 wrote:no ccd file

server conf
Code:

client-config-dir ccd
You have a 'ccd' directory ?

Do you run with root or sudo ?

Re: openvpn wont start, zero output

Posted: Tue May 05, 2015 11:53 am
by newuser44
ups, forgot that one

openvpn-andromeda.conf

Code: Select all

Tue May  5 13:39:59 2015 us=722242 MULTI: multi_create_instance called
Tue May  5 13:39:59 2015 us=722341 92.77.105.99:51746 Re-using SSL/TLS context
Tue May  5 13:39:59 2015 us=722365 92.77.105.99:51746 LZO compression initialized
Tue May  5 13:39:59 2015 us=722456 92.77.105.99:51746 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
Tue May  5 13:39:59 2015 us=722476 92.77.105.99:51746 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Tue May  5 13:39:59 2015 us=722525 92.77.105.99:51746 Local Options String: 'V4,dev-type tun,link-mtu 1542,tun-mtu 1500,proto UDPv4,comp-lzo,cipher BF-CBC,auth SHA1,keysize 128,key-method 2,tls-server'
Tue May  5 13:39:59 2015 us=722537 92.77.105.99:51746 Expected Remote Options String: 'V4,dev-type tun,link-mtu 1542,tun-mtu 1500,proto UDPv4,comp-lzo,cipher BF-CBC,auth SHA1,keysize 128,key-method 2,tls-client'
Tue May  5 13:39:59 2015 us=722558 92.77.105.99:51746 Local Options hash (VER=V4): '530fdded'
Tue May  5 13:39:59 2015 us=722575 92.77.105.99:51746 Expected Remote Options hash (VER=V4): '41690919'
Tue May  5 13:39:59 2015 us=722613 92.77.105.99:51746 TLS: Initial packet from [AF_INET]92.77.105.99:51746, sid=32d11172 5557d802
Tue May  5 13:40:00 2015 us=223382 92.77.105.99:51746 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funston/OU=changeme/CN=changeme/name=changeme/emailAddress=mail@host.domain
Tue May  5 13:40:00 2015 us=223829 92.77.105.99:51746 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funston/OU=changeme/CN=quadcore/name=changeme/emailAddress=mail@host.domain
Tue May  5 13:40:00 2015 us=277522 92.77.105.99:51746 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key
Tue May  5 13:40:00 2015 us=277751 92.77.105.99:51746 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Tue May  5 13:40:00 2015 us=277985 92.77.105.99:51746 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key
Tue May  5 13:40:00 2015 us=278146 92.77.105.99:51746 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Tue May  5 13:40:00 2015 us=317425 92.77.105.99:51746 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA
Tue May  5 13:40:00 2015 us=317615 92.77.105.99:51746 [quadcore] Peer Connection Initiated with [AF_INET]92.77.105.99:51746
Tue May  5 13:40:00 2015 us=317860 MULTI: new connection by client 'quadcore' will cause previous active sessions by this client to be dropped.  Remember to use the --duplicate-cn option if you want multiple clients using the same certificate or username to concurrently connect.
Tue May  5 13:40:00 2015 us=317967 MULTI_sva: pool returned IPv4=10.8.33.30, IPv6=1a00::a8b8:d9c3:417f:0
Tue May  5 13:40:00 2015 us=318058 MULTI: Learn: 10.8.33.30 -> quadcore/92.77.105.99:51746
Tue May  5 13:40:00 2015 us=318138 MULTI: primary virtual IP for quadcore/92.77.105.99:51746: 10.8.33.30
Tue May  5 13:40:02 2015 us=834569 quadcore/92.77.105.99:51746 PUSH: Received control message: 'PUSH_REQUEST'
Tue May  5 13:40:02 2015 us=834623 quadcore/92.77.105.99:51746 send_push_reply(): safe_cap=960
Tue May  5 13:40:02 2015 us=834658 quadcore/92.77.105.99:51746 SENT CONTROL [quadcore]: 'PUSH_REPLY,route 192.168.1.0 255.255.255.0,route 10.8.33.0 255.255.255.0,topology net30,ping 10,ping-restart 120,ifconfig 10.8.33.30 10.8.33.29' (status=1)

client is run with root, yes there is a ccd directory. but no file for my new client.

Re: openvpn wont start, zero output

Posted: Tue May 05, 2015 12:05 pm
by Traffic
The log "snippet" you have posted appears to show OpenVPN is working correctly ...

Re: openvpn wont start, zero output

Posted: Tue May 05, 2015 6:13 pm
by newuser44
hm, i could swear that /etc/init.d/openvpn didnt create a tun0 interface yesterday.
after that i started openvpn with

Code: Select all

openvpn --config quadcore.conf  --verb 9
which apparently does produce zero output.i was waiting for output, didnt check if tun0 was up.

thx

Re: openvpn wont start, zero output

Posted: Tue May 05, 2015 6:29 pm
by newuser44
Image

since theres no contact information on your profile, i posted that here.
you answered about 35% of posts in the configuration forums, thats a lot man!

Re: openvpn wont start, zero output

Posted: Tue May 05, 2015 7:18 pm
by Traffic
Well .. your contribution is appreciated

but I don't work for those guys :cry:

See my profile for new details (temporarily)

maybe you could redirect it ?

Anyway .. you are welcome 8-)
All times are UTC
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/