Redirecting all traffic through one of the client computer
Posted: Thu Dec 27, 2012 6:21 pm
Hello, I am new here.
I have got two computers with public IP directly connected to internet and few other without public IP.
My scenario is:
- One comp that will be a VPN server, I have already configured OpenVPN there. Here is my server.ovpn:
- second comp with public IP connectected directly to internet. I want to redirect all traffic from clients(not server) through this comp.
- few other comps without public .
Both last have following client.ovpn:
What else I have to do.
I have got two computers with public IP directly connected to internet and few other without public IP.
My scenario is:
- One comp that will be a VPN server, I have already configured OpenVPN there. Here is my server.ovpn:
Code: Select all
port 1200
proto udp
dev tun
ca "C:\\Program Files (x86)\\OpenVPN\\config\\ca.crt"
cert "C:\\Program Files (x86)\\OpenVPN\\config\\server.crt"
key "C:\\Program Files (x86)\\OpenVPN\\config\\server.key"
dh "C:\\Program Files (x86)\\OpenVPN\\config\\dh2048.pem"
server 10.8.0.0 255.255.255.0
ifconfig-pool-persist ipp.txt
client-to-client
keepalive 10 120
tls-auth "C:\\Program Files (x86)\\OpenVPN\\config\\ta.key" 0
cipher AES-256-CBC # AES
comp-lzo
persist-key
persist-tun
status openvpn-status.log
verb 3
- few other comps without public .
Both last have following client.ovpn:
Code: Select all
client
dev tun
proto udp
remote disaderp.eu 1200
resolv-retry infinite
nobind
persist-key
persist-tun
ca ca.crt
cert client.crt
key client.key
tls-auth ta.key 1
cipher AES-256-CBC
comp-lzo
verb 3