you are going to the wrong road so it never work , you use pam for local user not for radius user so let look this and start do it again , you need radius client run on so it can authencation with radius server .radius server use for big job so this is your job to do and take time
INTRODUCTION
The FreeRADIUS Server is a daemon for unix and unix like operating systems which allows one to set up a radius protocol server, which can be used for Authentication and Accounting various types of network access. To use the server, you also need a correctly setup client which will talk to it. Samples are hotspots, vpn protocols such as openvpn, strongswan or softether and some other router OS.
OpenVPN is an open-source software application that implements virtual private network (VPN) techniques for creating secure point-to-point or site-to-site connections in routed or bridged configurations and remote access facilities. It uses a custom security protocol that utilizes SSL/TLS for key exchange.
For this project we will configure openvpn to authenticate over our newly setup freeradius server. Once the client enters his/her username the radiusplugin will then relay this information to freeradius to verify if the credentials exists in the radius database and if the user is allowed. Once radius has confirmed that the user is allowed to login it will reply with an access-accept packet to openvpn server to allow the client.
PREREQUISITES
In this tutorial we will assume the following:
That you have successfully setup openvpn server (if not please take a look at this guide)
That freeradius is already setup and configured for use (if it is not yet installed please follow this tutorial)
Once all the ingredients are ready we will start modifying our openvpn configuration to authenticate via freeradius. This guide will be applicable for CentOS/Fedora and Ubuntu/Debian.
INSTALLING RADIUSPLUGIN
Go to your openvpn server (in this case I am using CentOS 7 64bit) and login as root.
Then install the required dependencies to successfully compile our radiusplugin.
Ubuntu/Debian:
apt-get install libgcrypt11 libgcrypt11-dev build-essential
CentOS/Fedora:
yum install libgcrypt libgcrypt-devel gcc-c++
After installing the dependencies we can now download the radiusplugin source. We will create a folder and download the source files from there.
Ubuntu/Debian/CentOS/Fedora:
mkdir /etc/radiusplugin
Then we will go inside the folder and download the source.
Ubuntu/Debian/CentOS/Fedora:
cd /etc/radiusplugin/
Ubuntu/Debian/CentOS/Fedora:
wget
http://www.nongnu.org/radiusplugin/radi ... ta1.tar.gz
After we download we need to extract the source files.
Ubuntu/Debian/CentOS/Fedora:
tar xvf radiusplugin_v2.1a_beta1.tar.gz
Then we will go inside the radiusplugin folder and execute the make command.
Ubuntu/Debian/CentOS/Fedora:
cd radiusplugin_v2.1a_beta1
make
We will get the file radiusplugin.so after compiling from source and we will need to transfer this file to a better location, most probably in the openvpn folder. But first we will need to create a radius folder inside openvpn.
Ubuntu/Debian/CentOS/Fedora:
mkdir /etc/openvpn/radius
Ubuntu/Debian/CentOS/Fedora:
cp -r radiusplugin.so /etc/openvpn/radius
CREATING RADIUSPLUGIN CONFIGURATION FILE
Next we will make a file we will call radius.cnf inside the '/etc/openvpn/radius/' folder. This will be the radiusplugin configuration file consisting of the details of our radius server including the radius server ip address and secret.
Ubuntu/Debian/CentOS/Fedora:
nano /etc/openvpn/radius/radius.cnf
And then copy the below details and paste it in the file.
NAS-Identifier=000.000.000.000_TCP_443
# The service type which is sent to the RADIUS server
Service-Type=5
# The framed protocol which is sent to the RADIUS server
Framed-Protocol=1
# The NAS port type which is sent to the RADIUS server
NAS-Port-Type=5
# The NAS IP address which is sent to the RADIUS server
NAS-IP-Address=000.000.000.000
# Path to the OpenVPN configfile. The plugin searches there for
# client-config-dir PATH (searches for the path)
# status FILE (searches for the file, version must be 1)
# client-cert-not-required (if the option is used or not)
# username-as-common-name (if the option is used or not)
OpenVPNConfig=/etc/openvpn/443_tcp.conf
# Support for topology option in OpenVPN 2.1
# If you don't specify anything, option "net30" (default in OpenVPN) is used.
# You can only use one of the options at the same time.
# If you use topology option "subnet", fill in the right netmask, e.g. from OpenVPN option "--server NETWORK NETMASK"
subnet=255.255.255.0
# If you use topology option "p2p", fill in the right network, e.g. from OpenVPN option "--server NETWORK NETMASK"
# p2p=10.8.0.1
# Allows the plugin to overwrite the client config in client config file directory,
# default is true
overwriteccfiles=true
# Allows the plugin to use auth control files if OpenVPN (>= 2.1 rc8) provides them.
# default is false
# useauthcontrolfile=false
# Only the accouting functionality is used, if no user name to forwarded to the plugin, the common name of certificate is used
# as user name for radius accounting.
# default is false
# accountingonly=false
# If the accounting is non essential, nonfatalaccounting can be set to true.
# If set to true all errors during the accounting procedure are ignored, which can be
# - radius accounting can fail
# - FramedRouted (if configured) maybe not configured correctly
# - errors during vendor specific attributes script execution are ignored
# But if set to true the performance is increased because OpenVPN does not block during the accounting procedure.
# default is false
nonfatalaccounting=false
# Path to a script for vendor specific attributes.
# Leave it out if you don't use an own script.
# vsascript=/root/workspace/radiusplugin_v2.0.5_beta/vsascript.pl
# Path to the pipe for communication with the vsascript.
# Leave it out if you don't use an own script.
# vsanamedpipe=/tmp/vsapipe
# A radius server definition, there could be more than one.
# The priority of the server depends on the order in this file. The first one has the highest priority.
server
{
# The UDP port for radius accounting.
acctport=1813
# The UDP port for radius authentication.
authport=1812
# The name or ip address of the radius server.
name=192.168.0.153
# How many times should the plugin send the if there is no response?
retry=1
# How long should the plugin wait for a response?
wait=1
# The shared secret.
sharedsecret=mysecret
}
Where:
mysecret is the freeradius server secret we configured on freeradius. You can change this depending on your freeradius setup.
192.168.0.153 is the ip address of our radius server. This will surely need to be changed.
000.000.000.000 is the ip address of our OpenVPN server. This will also need to be changed.
/etc/openvpn/443_tcp.conf is the path to our OpenVPN configuration file. Each OpenVPN configuration file needs its own radiusplugin configuration file as well. Again, this should be changed depending on your setup.
if all else is done save the file and exit.
We are done with radiusclient and we will configure openvpn next.
CONFIGURING OPENVPN FOR RADIUS AUTHENTICATION
To configure OpenVPN for radius authentication we will need to add several lines of into our OpenVPN configuration file. In our earlier tutorial we setup OpenVPN with Certificate authentication and for this guide we will be using username / password authentication.
From our last OpenVPN configuration, we will need to change it like below:
port 443
proto tcp
dev tun
server 10.11.0.0 255.255.255.0
ca /etc/openvpn/easy-rsa/keys/ca.crt
cert /etc/openvpn/easy-rsa/keys/server.crt
key /etc/openvpn/easy-rsa/keys/server.key
dh /etc/openvpn/easy-rsa/keys/dh2048.pem
plugin /etc/openvpn/radius/radiusplugin.so /etc/openvpn/radius/radius.cnf ifconfig-pool-persist ipp.txt persist-key
persist-tun
keepalive 10 60
reneg-sec 0
comp-lzo
tun-mtu 1468
tun-mtu-extra 32
mssfix 1400
push "persist-key"
push "persist-tun"
push "redirect-gateway def1"
push "dhcp-option DNS 8.8.8.8"
push "dhcp-option DNS 8.8.4.4"
status /etc/openvpn/443.log
verb 3
What we added:
plugin /etc/openvpn/radius/radiusplugin.so /etc/openvpn/radius/radius.cnf
Is the path to the radiusclient configuration file and program.
ifconfig-pool-persist ipp.txt
Is the file to be read by radiusplugin for accounting information.
Once all is done you can save the file and exit. Then we will restart openvpn to make the changes.
Ubuntu/Debian/CentOS/Fedora:
service openvpn restart
CentOS 7:
systemctl start openvpn@443_tcp.service
Connect from the OpenVPN client and login using your radius username & password credentials.