Code: Select all
sudo openvpn --config mandrade.ovpn --log log.txt --daemon
Code: Select all
Thu Mar 26 16:28:58 2020 Initialization Sequence Completed
Code: Select all
tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500
inet 10.229.126.22 netmask 255.255.255.255 destination 10.229.126.21
inet6 fe80::c1b0:c0cb:412b:6b95 prefixlen 64 scopeid 0x20<link>
unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 100 (UNSPEC)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 50 bytes 4098 (4.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Code: Select all
0.0.0.0 192.168.1.1 0.0.0.0 UG 100 0 0 enp5s0
10.90.47.0 10.229.126.21 255.255.255.0 UG 0 0 0 tun0
10.229.126.1 10.229.126.21 255.255.255.255 UGH 0 0 0 tun0
10.229.126.21 0.0.0.0 255.255.255.255 UH 0 0 0 tun0
157.92.0.0 10.229.126.21 255.255.0.0 UG 0 0 0 tun0
172.16.0.0 10.229.126.21 255.240.0.0 UG 0 0 0 tun0
172.17.0.0 0.0.0.0 255.255.0.0 U 0 0 0 docker0
172.18.0.0 0.0.0.0 255.255.0.0 U 0 0 0 br-263158e6934d
192.168.1.0 0.0.0.0 255.255.255.0 U 100 0 0 enp5s0
192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0
From other networks it's possible to connect correctly to the VPN. Even in the computer I'm using, I can connect with gnome's VPN client. However, this client is not ideal for my, as it completly bridges my pc, while I want to use the VPN just to access some hosts, as openvpn's client allows.