Morning All
Apologies if this is a duplicate post, my query is a strange one.
Basically we have a product that we want to use with a 4g router, configured with OpenVPN to talk to one of our hosted servers. My Query is can we connect multiple 4g routers using OpenVPN clients on each router to connect to 1 single hosted server?
Thanks
Hosted Server OpenVPN
Moderators: TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech
- Pippin
- Forum Team
- Posts: 1201
- Joined: Wed Jul 01, 2015 8:03 am
- Location: irc://irc.libera.chat:6697/openvpn
Re: Hosted Server OpenVPN
Yes that's possible.
The problem is often configure-ability and outdated firmware/OpenVPN version on such devices.
Or, maybe OpenVPN can run on your product...
The problem is often configure-ability and outdated firmware/OpenVPN version on such devices.
Or, maybe OpenVPN can run on your product...
I gloomily came to the ironic conclusion that if you take a highly intelligent person and give them the best possible, elite education, then you will most likely wind up with an academic who is completely impervious to reality.
Halton Arp
Halton Arp
-
- OpenVpn Newbie
- Posts: 14
- Joined: Thu Nov 14, 2019 2:40 pm
Re: Hosted Server OpenVPN
I followed these steps for my router, hope these steps help you!
Step1:
1. Set up OpenVPN Server on Your Router.
2. Go to Advanced > VPN Server > OpenVPN, and select Enable VPN Server.
3. Select the Service Type (communication protocol) for OpenVPN Server: UDP, TCP.
4. Enter a VPN Service Port to which a VPN device connects, and the port number should be between 1024 and 65535.
5. In the VPN Subnet/Netmask fields, enter the range of IP addresses that can be leased to the device by the OpenVPN server.
6. Select your Client Access type. Select Home Network Only if you only want the remote device to access your home network; select Internet and Home Network if you also want the remote device to access the internet through the VPN Server.
7. Click Save.
8. Click Generate to get a new certificate.
Note: If you have already generated one, please skip this step, or click Generate to update the certificate
9. Click Export to save the OpenVPN configuration file which will be used by the remote device to access your router.
Step 2. Configure OpenVPN Connection on Your Remote Device
1. Download the OpenVPN software, and install it on your device where you want to run the OpenVPN client utility.
2. After the installation, copy the file exported from your router to the OpenVPN client utility’s “config” folder (for example, C:\Program Files\OpenVPN\config on Windows). The path depends on where the OpenVPN client utility is installed.
3. Run the OpenVPN client utility and connect it to OpenVPN Server.
Regards,
Charles
Step1:
1. Set up OpenVPN Server on Your Router.
2. Go to Advanced > VPN Server > OpenVPN, and select Enable VPN Server.
3. Select the Service Type (communication protocol) for OpenVPN Server: UDP, TCP.
4. Enter a VPN Service Port to which a VPN device connects, and the port number should be between 1024 and 65535.
5. In the VPN Subnet/Netmask fields, enter the range of IP addresses that can be leased to the device by the OpenVPN server.
6. Select your Client Access type. Select Home Network Only if you only want the remote device to access your home network; select Internet and Home Network if you also want the remote device to access the internet through the VPN Server.
7. Click Save.
8. Click Generate to get a new certificate.
Note: If you have already generated one, please skip this step, or click Generate to update the certificate
9. Click Export to save the OpenVPN configuration file which will be used by the remote device to access your router.
Step 2. Configure OpenVPN Connection on Your Remote Device
1. Download the OpenVPN software, and install it on your device where you want to run the OpenVPN client utility.
2. After the installation, copy the file exported from your router to the OpenVPN client utility’s “config” folder (for example, C:\Program Files\OpenVPN\config on Windows). The path depends on where the OpenVPN client utility is installed.
3. Run the OpenVPN client utility and connect it to OpenVPN Server.
Regards,
Charles
-
- OpenVpn Newbie
- Posts: 3
- Joined: Fri Nov 22, 2019 9:39 am
Re: Hosted Server OpenVPN
Thanks Charles, would we not need to install Open VPN server on the hosted server we are connecting to?
thanks
Chris
thanks
Chris
- Pippin
- Forum Team
- Posts: 1201
- Joined: Wed Jul 01, 2015 8:03 am
- Location: irc://irc.libera.chat:6697/openvpn
Re: Hosted Server OpenVPN
Start here:
https://community.openvpn.net/openvpn/wiki/HOWTO
https://community.openvpn.net/openvpn/wiki/HOWTO
I gloomily came to the ironic conclusion that if you take a highly intelligent person and give them the best possible, elite education, then you will most likely wind up with an academic who is completely impervious to reality.
Halton Arp
Halton Arp