When clients connect via the TAP interface their mac address is cycled every connection.
Is there a way for the TAP interface to keep the native mac of the client?
Thanks,
fixed MAC address on a TAP interface
Moderators: TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech
Forum rules
Please use the [oconf] BB tag for openvpn Configurations. See viewtopic.php?f=30&t=21589 for an example.
Please use the [oconf] BB tag for openvpn Configurations. See viewtopic.php?f=30&t=21589 for an example.
-
- OpenVPN User
- Posts: 22
- Joined: Fri May 29, 2015 12:40 am
-
- OpenVPN User
- Posts: 25
- Joined: Wed Nov 05, 2014 2:58 am
Re: fixed MAC address on a TAP interface
I'm not sure if this is the issue you're having but I had an issue where Windows kept thinking I was joining a new network every time I would connect to Openvpn. The issue was running the server in bridge mode. The bridge will take the MAC address of the lowest addressed member. I solved this by manually setting the MAC address of the TAP interface to an artificially high number that is beyond any of the possible connected clients on startup. I.E. ifconfig tap0 hw ether ee:ee:**:**:**:** That command is for a linux openvpn server. If this is Windows, you will have to find a way to do it there. Hopefully it helps.
-
- OpenVPN User
- Posts: 22
- Joined: Fri May 29, 2015 12:40 am
Re: fixed MAC address on a TAP interface
Hi Bird, thanks for the recommendation... i'll give it a try.
if i cant get that to go i may switch back to TUN and give the CCD method a try
if i cant get that to go i may switch back to TUN and give the CCD method a try