Hi.
We need to setup a tunnel with ovpn, this will be PKI multi sites, the cloud server will run centos 7 and will be the ovpn server.
Our clients most of them will be MK.
My doubt is this one, my cloud server has just 1 NIC with the public IP my host company give to us.
If we setup ovpn there, do I need to have a LAN in the cloud server to communicate between clients and our server?
I ask this, because most of my installations have the standard WAN/LAN interfaces which I know that works, I run the tunnels and my clients can communicate each other LAN2LAN, but this is my first case I have a server with just 1 NIC and is the WAN
I want to learn from u guys with your suggestion and tips, which always be appreciated, thanks.
Cloud Server PKI Multi Sites Suggestion.
Moderators: TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech
Forum rules
Please use the [oconf] BB tag for openvpn Configurations. See viewtopic.php?f=30&t=21589 for an example.
Please use the [oconf] BB tag for openvpn Configurations. See viewtopic.php?f=30&t=21589 for an example.
-
- OpenVpn Newbie
- Posts: 9
- Joined: Wed Apr 18, 2018 2:26 am
-
- OpenVPN Protagonist
- Posts: 11137
- Joined: Fri Jun 03, 2016 1:17 pm
Re: Cloud Server PKI Multi Sites Suggestion.
You don't need a LAN.
-
- OpenVpn Newbie
- Posts: 9
- Joined: Wed Apr 18, 2018 2:26 am
Re: Cloud Server PKI Multi Sites Suggestion.
Thanks TinCanTech.
In my case, how my clients will reach my server over the tunnel, by the public IP?
Can u please open my brain?
Thanks again.
In my case, how my clients will reach my server over the tunnel, by the public IP?
Can u please open my brain?
Thanks again.
-
- OpenVPN Protagonist
- Posts: 11137
- Joined: Fri Jun 03, 2016 1:17 pm
Re: Cloud Server PKI Multi Sites Suggestion.
-
- OpenVpn Newbie
- Posts: 9
- Joined: Wed Apr 18, 2018 2:26 am
Re: Cloud Server PKI Multi Sites Suggestion.
I had check the FAQ, but didn't see the key for this.
Thinking a little, in a normal way, we push from both side the networks we want to reach.
example:
server A.B.C.D/32 in my case my only IP which is public.
here I push my remote network: E.F.G.H/24.
client-a: E.F.G.H/24.
here i push A.B.C.D/32
Do I'm right? or could u please point me the link where I will find my answer.
Thinking a little, in a normal way, we push from both side the networks we want to reach.
example:
server A.B.C.D/32 in my case my only IP which is public.
here I push my remote network: E.F.G.H/24.
client-a: E.F.G.H/24.
here i push A.B.C.D/32
Do I'm right? or could u please point me the link where I will find my answer.
-
- OpenVPN Protagonist
- Posts: 11137
- Joined: Fri Jun 03, 2016 1:17 pm