[1]31999 ????????????

[eric66300]

sir i try to run my server
openvpn /etc/openvpn/tcp80.conf

but nothing happen always this number appears

[1]31999

this s my server config

local ???./???.///?

port 80

proto tcp

dev tun

dev-node MyTap

ca /etc/openvpn/easy-rsa/2.0/keys/ca.crt
cert /etc/openvpn/easy-rsa/2.0/keys/server.crt
key /etc/openvpn/easy-rsa/2.0/keys/server.key
dh /etc/openvpn/easy-rsa/2.0/keys/dh1024.pem
plugin /usr/share/openvpn/plugin/lib/openvpn-auth-pam.so /etc/pam.d/login

server 10.8.0.0 255.255.255.0

ifconfig-pool-persist ipp.txt

server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100

push "route 192.168.10.0 255.255.255.0"



push "redirect-gateway def1"

push "dhcp-option DNS 208.67.222.222"
push "dhcp-option DNS 8.8.4.4"

duplicate-cn


keepalive 10 120

tls-auth ta.key 0

cipher BF-CBC

comp-lzo

max-clients 100

persist-key
persist-tun

status openvpn-status.log

log openvpn.log
log-append openvpn.log

verb 3

mute 5

thanks

[janjust]

it seems a second process (the pam plugin is a good candidate) is spawning into the background, causing the message '[1]<pid>' to appear.
To see the actual status of your openvpn setup, check the 'openvpn.log' file in the directory where you started OpenVPN.

Some general tips:
* if you want openvpn to completely launch in the background, add 'daemon'
* it is best to specify a full path name when using 'log-append'
* using both 'log' and 'log-append' does not make sense: the last one specified "wins". If you had specified 'log' as the last one the log file would always be truncated every time openvpn starts.

[maikcat]

hi there,


>dev tun
>dev-node MyTap
>server 10.8.0.0 255.255.255.0
>server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100


just to know that tun interface is used for routing
and you mix server and server-bridge all together....

what you want to do?routing or bridging?

Michael.