Still showing my IP Address.

[snipes]

Just trying to setup OpenVPN on my dream machine pro, I have been following a few guides on youtube etc. my windows client is saying it's connected but when I "what my ip" it's still showing my original IP. It's probably something Im doing but I can't figure out what it is.

Please help and thank you.

[olog]Sun Jun 11 11:23:38 2023 NOTE: --user option is not implemented on Windows
Sun Jun 11 11:23:38 2023 NOTE: --group option is not implemented on Windows
Sun Jun 11 11:23:38 2023 WARNING: Compression for receiving enabled. Compression has been used in the past to break encryption. Sent packets are not compressed unless "allow-compression yes" is also set.
Sun Jun 11 11:23:38 2023 DEPRECATED OPTION: --cipher set to 'AES-256-CBC' but missing in --data-ciphers (AES-256-GCM:AES-128-GCM:CHACHA20-POLY1305). OpenVPN ignores --cipher for cipher negotiations.
Sun Jun 11 11:23:38 2023 Note: '--allow-compression' is not set to 'no', disabling data channel offload.
Sun Jun 11 11:23:38 2023 OpenVPN 2.6.4 [git:v2.6.4/b4f749f14a8edc75] Windows-MSVC [SSL (OpenSSL)] [LZO] [LZ4] [PKCS11] [AEAD] [DCO] built on May 11 2023
Sun Jun 11 11:23:38 2023 Windows version 10.0 (Windows 10 or greater), amd64 executable
Sun Jun 11 11:23:38 2023 library versions: OpenSSL 3.1.0 14 Mar 2023, LZO 2.10
Sun Jun 11 11:23:38 2023 DCO version: v0
Sun Jun 11 11:23:38 2023 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:25342
Sun Jun 11 11:23:38 2023 Need hold release from management interface, waiting...
Sun Jun 11 11:23:38 2023 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:59257
Sun Jun 11 11:23:38 2023 MANAGEMENT: CMD 'state on'
Sun Jun 11 11:23:38 2023 MANAGEMENT: CMD 'log on all'
Sun Jun 11 11:23:38 2023 MANAGEMENT: CMD 'echo on all'
Sun Jun 11 11:23:38 2023 MANAGEMENT: CMD 'bytecount 5'
Sun Jun 11 11:23:38 2023 MANAGEMENT: CMD 'state'
Sun Jun 11 11:23:38 2023 MANAGEMENT: CMD 'hold off'
Sun Jun 11 11:23:38 2023 MANAGEMENT: CMD 'hold release'
Sun Jun 11 11:23:42 2023 MANAGEMENT: CMD 'username "Auth" "AdamS"'
Sun Jun 11 11:23:42 2023 MANAGEMENT: CMD 'password [...]'
Sun Jun 11 11:23:42 2023 TCP/UDP: Preserving recently used remote address: [AF_INET]10.1.1.154:1194
Sun Jun 11 11:23:42 2023 Socket Buffers: R=[65536->65536] S=[65536->65536]
Sun Jun 11 11:23:42 2023 Attempting to establish TCP connection with [AF_INET]10.1.1.154:1194
Sun Jun 11 11:23:42 2023 MANAGEMENT: >STATE:1686448422,TCP_CONNECT,,,,,,
Sun Jun 11 11:23:42 2023 TCP connection established with [AF_INET]10.1.1.154:1194
Sun Jun 11 11:23:42 2023 TCPv4_CLIENT link local: (not bound)
Sun Jun 11 11:23:42 2023 TCPv4_CLIENT link remote: [AF_INET]10.1.1.154:1194
Sun Jun 11 11:23:42 2023 MANAGEMENT: >STATE:1686448422,WAIT,,,,,,
Sun Jun 11 11:23:42 2023 MANAGEMENT: >STATE:1686448422,AUTH,,,,,,
Sun Jun 11 11:23:42 2023 TLS: Initial packet from [AF_INET]10.1.1.154:1194, sid=c69391bc 563ea3b4
Sun Jun 11 11:23:42 2023 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
Sun Jun 11 11:23:42 2023 VERIFY OK: depth=1, C=US, ST=New York, L=New York, O=Ubiquiti Inc., OU=UniFi_OpenVPN_CA, CN=UniFi_OpenVPN_CA
Sun Jun 11 11:23:42 2023 VERIFY KU OK
Sun Jun 11 11:23:42 2023 Validating certificate extended key usage
Sun Jun 11 11:23:42 2023 ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication
Sun Jun 11 11:23:42 2023 VERIFY EKU OK
Sun Jun 11 11:23:42 2023 VERIFY OK: depth=0, C=US, ST=New York, L=New York, O=Ubiquiti Inc., OU=UniFi_OpenVPN_Server, CN=UniFi_OpenVPN_Server
Sun Jun 11 11:23:42 2023 Control Channel: TLSv1.3, cipher TLSv1.3 TLS_AES_256_GCM_SHA384, peer certificate: 2048 bit RSA, signature: RSA-SHA256
Sun Jun 11 11:23:42 2023 [UniFi_OpenVPN_Server] Peer Connection Initiated with [AF_INET]10.1.1.154:1194
Sun Jun 11 11:23:42 2023 TLS: move_session: dest=TM_ACTIVE src=TM_INITIAL reinit_src=1
Sun Jun 11 11:23:42 2023 TLS: tls_multi_process: initial untrusted session promoted to trusted
Sun Jun 11 11:23:42 2023 PUSH: Received control message: 'PUSH_REPLY,dhcp-option DNS 8.8.8.8,route 192.168.1.0 255.255.255.0,route 8.8.8.8 255.255.255.255,route-gateway 192.168.2.1,topology subnet,ping 10,ping-restart 60,ifconfig 192.168.2.2 255.255.255.0,peer-id 0,cipher AES-256-GCM'
Sun Jun 11 11:23:42 2023 OPTIONS IMPORT: --ifconfig/up options modified
Sun Jun 11 11:23:42 2023 OPTIONS IMPORT: route options modified
Sun Jun 11 11:23:42 2023 OPTIONS IMPORT: route-related options modified
Sun Jun 11 11:23:42 2023 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified
Sun Jun 11 11:23:42 2023 interactive service msg_channel=632
Sun Jun 11 11:23:42 2023 open_tun
Sun Jun 11 11:23:42 2023 tap-windows6 device [OpenVPN TAP-Windows6] opened
Sun Jun 11 11:23:42 2023 TAP-Windows Driver Version 9.26
Sun Jun 11 11:23:42 2023 Set TAP-Windows TUN subnet mode network/local/netmask = 192.168.2.0/192.168.2.2/255.255.255.0 [SUCCEEDED]
Sun Jun 11 11:23:42 2023 Notified TAP-Windows driver to set a DHCP IP/netmask of 192.168.2.2/255.255.255.0 on interface {F38C6C05-5ABF-46DF-967C-38F8818B0C7B} [DHCP-serv: 192.168.2.0, lease-time: 31536000]
Sun Jun 11 11:23:42 2023 Successful ARP Flush on interface [19] {F38C6C05-5ABF-46DF-967C-38F8818B0C7B}
Sun Jun 11 11:23:42 2023 MANAGEMENT: >STATE:1686448422,ASSIGN_IP,,192.168.2.2,,,,
Sun Jun 11 11:23:42 2023 IPv4 MTU set to 1500 on interface 19 using service
Sun Jun 11 11:23:42 2023 Data Channel: cipher 'AES-256-GCM', peer-id: 0, compression: 'lzo'
Sun Jun 11 11:23:42 2023 Timers: ping 10, ping-restart 60
Sun Jun 11 11:23:47 2023 TEST ROUTES: 3/3 succeeded len=2 ret=1 a=0 u/d=up
Sun Jun 11 11:23:47 2023 C:\WINDOWS\system32\route.exe ADD 10.1.1.154 MASK 255.255.255.255 192.168.1.1
Sun Jun 11 11:23:47 2023 Route addition via service succeeded
Sun Jun 11 11:23:47 2023 C:\WINDOWS\system32\route.exe ADD 0.0.0.0 MASK 128.0.0.0 192.168.2.1
Sun Jun 11 11:23:47 2023 Route addition via service succeeded
Sun Jun 11 11:23:47 2023 C:\WINDOWS\system32\route.exe ADD 128.0.0.0 MASK 128.0.0.0 192.168.2.1
Sun Jun 11 11:23:47 2023 Route addition via service succeeded
Sun Jun 11 11:23:47 2023 MANAGEMENT: >STATE:1686448427,ADD_ROUTES,,,,,,
Sun Jun 11 11:23:47 2023 C:\WINDOWS\system32\route.exe ADD 192.168.1.0 MASK 255.255.255.0 192.168.2.1
Sun Jun 11 11:23:47 2023 Route addition via service succeeded
Sun Jun 11 11:23:47 2023 C:\WINDOWS\system32\route.exe ADD 8.8.8.8 MASK 255.255.255.255 192.168.2.1
Sun Jun 11 11:23:47 2023 Route addition via service succeeded
Sun Jun 11 11:23:47 2023 Initialization Sequence Completed
Sun Jun 11 11:23:47 2023 MANAGEMENT: >STATE:1686448427,CONNECTED,SUCCESS,192.168.2.2,10.1.1.154,1194,192.168.1.86,59259
[/olog]

[Fadim]

It sounds like your OpenVPN server is currently set up to only route traffic intended for the VPN network over the VPN. This could be why your IP isn't being masked as expected.

To get all of your traffic to go through the VPN, you'll need to modify your server configuration. Specifically, you'll need to add this line: 'push "redirect-gateway def1"' to your server configuration file. This will instruct your client to route all traffic over the VPN.

This change should help mask your IP. If you're new to modifying OpenVPN configuration files, you might find this OpenVPN HOWTO guide helpful:https://openvpn.net/community-resources/how-to/

Remember to restart your OpenVPN service after making any changes to the configuration file.

[nehakakar]

If you want to use the VPN for specific purposes, but not route all traffic through it, you can remove the "redirect-gateway" line from the server configuration. This will prevent the server from redirecting all the client's traffic through the VPN, and your original IP should no longer be visible when checking your IP address. for more information see the doc: https://openvpn.net/community-resources ... s-policies