Route network in VPN cloud

Next-generation cloud-hosted OpenVPN business solution.
Post Reply
OpenVpn Newbie
Posts: 1
Joined: Thu Sep 29, 2022 10:28 am

Route network in VPN cloud

Post by gennarop » Thu Sep 29, 2022 11:23 am


i have this configuration:


I have config Network on VPN cloud and download config and upload on client network on NAS synology.
Synology connect to vpn correctly.
Network Synology is : - gw=
Pc2= (
Pc1= (on same network synology -

and when i connect to vpn from pc2 on rete2 with network -> connect to vpncloud with vpnconnect3
i connect ok
if i ping nas is correct.
The route is correct becouse there is a route that download in automatic from vpn -> to vpn
So when i ping from (pc on rete2) -> to Nas ( = ping is ok

Now if i want ping another PC1 on rete1 ( the routing is correct but i think that less another route i think on the pctest2.
becouse from PC1 if i do tracert -> the trace go to vpn but there isn't response after.

So What route i must add for ping PC1 from pc2 ?
Or what is wrong?

Thanks for help.

User avatar
OpenVPN Inc.
Posts: 1185
Joined: Tue Feb 16, 2021 10:41 am

Re: Route network in VPN cloud

Post by openvpn_inc » Thu Sep 29, 2022 1:22 pm


In your NAS Connector, please make sure to enable NAT and Routing as described in the below article: ... onnectors/

Image OpenVPN Inc.
Answers provided by OpenVPN Inc. staff members here are provided on a voluntary best-effort basis, and no rights can be claimed on the basis of answers posted in this public forum. If you wish to get official support from OpenVPN Inc. please use the official support ticket system:

Post Reply