Good day. I have set up OpenVpn on a Pfsense firewall. After downloading the configuration exe, all seems fine and i can connect from my Win10 desktop to the openvpn. My setup is as follow :
Tunnel Network 10.200.0.0/22
Internal Network 172.16.1.0/24
Pfsense LAN IP 172.16.1.28/24
Host on Lan 172.16.1.29/24
Route Print from PC :
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.8.1 192.168.8.105 25
10.200.0.0 255.255.252.0 On-link 10.200.0.2 281
10.200.0.2 255.255.255.255 On-link 10.200.0.2 281
10.200.3.255 255.255.255.255 On-link 10.200.0.2 281
127.0.0.0 255.0.0.0 On-link 127.0.0.1 331
127.0.0.1 255.255.255.255 On-link 127.0.0.1 331
127.255.255.255 255.255.255.255 On-link 127.0.0.1 331
172.16.1.0 255.255.255.0 10.200.0.1 10.200.0.2 281
192.168.8.0 255.255.255.0 On-link 192.168.8.105 281
192.168.8.105 255.255.255.255 On-link 192.168.8.105 281
192.168.8.255 255.255.255.255 On-link 192.168.8.105 281
224.0.0.0 240.0.0.0 On-link 127.0.0.1 331
224.0.0.0 240.0.0.0 On-link 192.168.8.105 281
224.0.0.0 240.0.0.0 On-link 10.200.0.2 281
255.255.255.255 255.255.255.255 On-link 127.0.0.1 331
255.255.255.255 255.255.255.255 On-link 192.168.8.105 281
255.255.255.255 255.255.255.255 On-link 10.200.0.2 281
Once connected, i cannot ping the host ip 172.16.1.29/24. I CAN however, ping the PFsense LAN ip of 172.16.1.28/24
I am a total beginner on both PFsense and Openvpn. But followed multiple tutorials and the result stays the same. Can anyone please help me?
Routing / Lan Access Problems Win10
Moderators: TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech, TinCanTech
Forum rules
Please use the [oconf] BB tag for openvpn Configurations. See viewtopic.php?f=30&t=21589 for an example.
Please use the [oconf] BB tag for openvpn Configurations. See viewtopic.php?f=30&t=21589 for an example.
-
- OpenVpn Newbie
- Posts: 2
- Joined: Thu Jul 28, 2022 1:02 pm
-
- OpenVpn Newbie
- Posts: 2
- Joined: Thu Jul 28, 2022 1:02 pm
Re: Routing / Lan Access Problems Win10
Solved by changing Nat to Hybrid on PfSense and re-doing the routes to my internal network