Windows Server 2019
Network: 192.168.0.0/24
In 'OpenVPN Cloud' I create new network with subnet: 192.168.0.0/24.
On server with IP=192.168.0.233 I install client software.
Before 'ovpnconnector.exe start' route table is like this:
Code: Select all
Destination Netmask Gateway Interface Metric
...
192.168.0.0 255.255.255.0 On-link 192.168.0.233 281
...
Code: Select all
Destination Netmask Gateway Interface Metric
...
192.168.0.0 255.255.255.0 On-link 192.168.0.233 281
192.168.0.0 255.255.255.0 100.96.1.17 100.96.1.18 257
...
After 'ovpnconnector.exe stop' route table didn't changed, why?
What can I do?