OpenVPN Connection

Need help configuring your VPN? Just post here and you'll get that help.
Forum rules
Please use the [oconf] BB tag for openvpn Configurations. See viewtopic.php?f=30&t=21589 for an example.
Post Reply
youzhi
OpenVpn Newbie
Posts: 1
Joined: Thu Jun 30, 2022 9:31 am

OpenVPN Connection

Post by youzhi » Thu Jun 30, 2022 9:33 am

##############################################

# Sample client-side OpenVPN 2.0 config file #

# for connecting to multi-client server. #

# #

# This configuration can be used by multiple #

# clients, however each client should have #

# its own cert and key files. #

# #

# On Windows, you might want to rename this #

# file so it has a .ovpn extension #

##############################################



# Specify that we are a client and that we

# will be pulling certain config file directives

# from the server.

client



# Use the same setting as you are using on

# the server.

# On most systems, the VPN will not function

# unless you partially or fully disable

# the firewall for the TUN/TAP interface.

;dev tap

dev tun



# Windows needs the TAP-Win32 adapter name

# from the Network Connections panel

# if you have more than one. On XP SP2,

# you may need to disable the firewall

# for the TAP adapter.

;dev-node MyTap



# Are we connecting to a TCP or

# UDP server? Use the same setting as

# on the server.

proto tcp

;proto udp



# The hostname/IP and port of the server.

# You can have multiple remote entries

# to load balance between the servers.

remote 192.168.88.1 8080

;remote my-server-2 1194



# Choose a random host from the remote

# list for load-balancing. Otherwise

# try hosts in the order specified.

;remote-random



# Keep trying indefinitely to resolve the

# host name of the OpenVPN server. Very useful

# on machines which are not permanently connected

# to the internet such as laptops.

resolv-retry infinite



# Most clients don't need to bind to

# a specific local port number.

nobind



# Downgrade privileges after initialization (non-Windows only)

;user nobody

;group nobody



# Try to preserve some state across restarts.

persist-key
persist-tun


# If you are connecting through an

# HTTP proxy to reach the actual OpenVPN

# server, put the proxy server/IP and

# port number here. See the man page

# if your proxy server requires

# authentication.

;http-proxy-retry # retry on connection failures

;http-proxy [proxy server] [proxy port #]



# Wireless networks often produce a lot

# of duplicate packets. Set this flag

# to silence duplicate packet warnings.

;mute-replay-warnings



# SSL/TLS parms.

# See the server config file for more

# description. It's best to use

# a separate .crt/.key file pair

# for each client. A single ca

# file can be used for all clients.

ca CA.crt

cert Client.crt

key Client.key



# Verify server certificate by checking that the

# certificate has the correct key usage set.

# This is an important precaution to protect against

# a potential attack discussed here:

# http://openvpn.net/howto.html#mitm

#

# To use this feature, you will need to generate

# your server certificates with the keyUsage set to

# digitalSignature, keyEncipherment

# and the extendedKeyUsage to

# serverAuth

# EasyRSA can do this for you.

remote-cert-tls server


# If a tls-auth key is used on the server

# then every client must also have the key.

;tls-auth test.key


# Select a cryptographic cipher.

# If the cipher option is used on the server

# then you must also specify it here.

# Note that v2.4 client/server will automatically

# negotiate AES-256-GCM in TLS mode.

# See also the data-ciphers option in the manpage


cipher AES-256-CBC

# Enable compression on the VPN link.

# Don't enable this unless it is also

# enabled in the server config file.

#comp-lzo
auth-user-pass secret.cfg
auth-nocache
tls-client

# Set log file verbosity.

verb 4

# Silence repeating messages

;mute 20

My Client is 192.168.88.100, my mikrotik is 192.168.88.1, now is direct connection, not able to connect

Post Reply