Reconnecting

This forum is for general conversation and user-user networking.
Post Reply
dreamerman
OpenVpn Newbie
Posts: 4
Joined: Tue Feb 12, 2013 9:13 pm

Reconnecting

Post by dreamerman » Tue Feb 05, 2019 3:05 am

Hi, I am just starting to use OpenVPN and using the latest free client v2.4.6. I am able to get it working (with VPN Unlimited config) except how to reconnect when the line drops. Is there a setting to reconnect?

User avatar
imjebran
OpenVPN Power User
Posts: 69
Joined: Tue Jul 03, 2012 10:38 am

Re: Reconnecting

Post by imjebran » Thu Feb 07, 2019 12:58 pm

Hello,

Kindly post the connection logs here.

Regards,

dreamerman
OpenVpn Newbie
Posts: 4
Joined: Tue Feb 12, 2013 9:13 pm

Re: Reconnecting

Post by dreamerman » Sat Feb 23, 2019 10:57 am

Hi, my log is as follows. Sorry for my late reply. Have had to deal with some family issues.

Sat Feb 23 21:42:29 2019 OpenVPN 2.4.6 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [LZ4] [PKCS11] [AEAD] built on Apr 26 2018
Sat Feb 23 21:42:29 2019 Windows version 6.2 (Windows 8 or greater) 64bit
Sat Feb 23 21:42:29 2019 library versions: OpenSSL 1.1.0h 27 Mar 2018, LZO 2.10
Enter Management Password:
Sat Feb 23 21:42:30 2019 TCP/UDP: Preserving recently used remote address: [AF_INET]177.67.82.222:1194
Sat Feb 23 21:42:30 2019 UDP link local: (not bound)
Sat Feb 23 21:42:30 2019 UDP link remote: [AF_INET]177.67.82.222:1194
Sat Feb 23 21:42:31 2019 [openvpn2.vpnunlimitedapp.com] Peer Connection Initiated with [AF_INET]177.67.82.222:1194
Sat Feb 23 21:42:37 2019 open_tun
Sat Feb 23 21:42:37 2019 TAP-WIN32 device [Ethernet 2] opened: \\.\Global\{55496B30-6FCD-477B-9990-2CB179F52131}.tap
Sat Feb 23 21:42:37 2019 Notified TAP-Windows driver to set a DHCP IP/netmask of 10.200.0.34/255.255.255.252 on interface {55496B30-6FCD-477B-9990-2CB179F52131} [DHCP-serv: 10.200.0.33, lease-time: 31536000]
Sat Feb 23 21:42:37 2019 Successful ARP Flush on interface [16] {55496B30-6FCD-477B-9990-2CB179F52131}
Sat Feb 23 21:42:37 2019 do_ifconfig, tt->did_ifconfig_ipv6_setup=0
Sat Feb 23 21:42:42 2019 Initialization Sequence Completed

Post Reply