Need Help With OpenVPN on Windows 2000
Posted: Sun Aug 31, 2008 9:09 pm
This is the first time I've installed and configured OpenVPN. I'm running 2.0.9 on Windows 2000 Server, I couldn't bridge the connections in 2000 so I'm using the NAT routing mode. After I had everything configured properly I tested the VPN from within the office and it seemed to work fine. Their modem/router had some issue with port forwarding so I had no way to test it outside of the office. When I tested from within the office I could browse files on the server computer that was running OpenVPN BUT first I had to manually configure the TAP network adapter on the server computer. It wouldn't get any settings from DHCP. The next day Embarq delivered a new modem/router and I configured it to have the same settings as their old one plus setup port forwarding on TCP 1194 and poked a hole in the firewall. The ONLY thing that's changed is the modem/router and I've rebooted the server. Now clients connect to the VPN and aquire an IP/Subnet mask via DHCP but they can't ping any other VPN clients or the server. No traffic can get through. I've tried using the client on Windows XP SP3 and Vista SP1. I've browsed through the log files and couldn't find anything that looked like an error. Is this a common problem? Is there something simple I'm overlooking? I can post the log and configuration files if need be as well as turn the verbosity up all the way. I have terminal services access from home so I can get to everything at any time of the day and test right away. ANY suggestions are appreciated.