my Problem is that after installing Windows 10 Update, Version 1803 I can't ping any PC on my server-side local Network with my client. The VPN Tunnel is still working because I can ping my VPN Server with the LAN IP Address and with the VPN IP Address. My Client (Raspberry Pi) is not on the local Network of my Server and he is not on the very common IP subnet 192.168.2.0.
LAN IP (server side): 192.168.2.0 Gateway 192.168.2.1 Server 192.168.2.196
VPN IP: 10.8.99.0
My Windows 10 Settings are:
Start -> Right-click My Computer -> Manage
Services
Right-click Routing and Remote Access -> Properties -> Automatic
Right-click Routing and Remote Access -> Start
Next:
Control Panel
Network and Sharing Center
Local Area Connection
Properties
Sharing
Tick the box "Allow other network users to connect through this computer's Internet connection"
regedit
Key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
Value: IPEnableRouter
Type: REG_DWORD
Data: 0x00000001 (1)
I tried adding some static routes and I disabled the Servers Firewall completely but it hasn't worked out.
Here are the configs how it worked before the update. I had Internet Connection an I could ping every PC on LAN.
Server Config:
Code: Select all
dev tun
proto udp
port 1196
ca ca.crt
cert server.crt
key server.key
dh dh2048.pem
server 10.8.99.0 255.255.255.0
push "redirect-gateway def1 bypass-dhcp"
#push "redirect-gateway autolocal def1"
#push "dhcp-option DNS 217.237.150.188"
#push "dhcp-option DNS 8.8.8.8"
push "dhcp-option DNS 192.168.2.1"
push "route-gateway 192.168.2.1 255.255.255.0"
push "route 192.168.2.0 255.255.255.0"
#ifconfig-pool-persist ipp.txt
keepalive 10 120
comp-lzo
persist-key
persist-tun
#status openvpn-status.log
client-to-client
verb 4
#block-outside-dns
Code: Select all
dev tun
client
proto udp
remote <dyn DNS IP> 1196
resolv-retry infinite
nobind
persist-key
persist-tun
ca /etc/openvpn/client/ca.crt
cert /etc/openvpn/client/client1.crt
key /etc/openvpn/client/client1.key
comp-lzo
verb 4
Thank you for your help!