Something wrong with routing tables, cannot sort this out
I have two clients - one is under Win10 wich works good, the second(DD-WRT) can't even ping the server.
OpenVPN Server(TAP)
Local network 10.1.0.1/24
VPN network 10.7.0.1/24
Windows10 (10.7.0.9)
Destination Gateway Genmask Flags Metric Ref Use Iface
default 10.33.93.1 0.0.0.0 UG 0 0 0 vlan2
10.1.0.0 10.7.0.1 255.255.255.0 UG 0 0 0 tap1
10.2.0.0 * 255.255.255.0 U 0 0 0 br0
10.7.0.0 * 255.255.255.0 U 0 0 0 tap1
10.7.0.2 * 255.255.255.255 UH 0 0 0 tap1
10.33.93.0 * 255.255.255.0 U 0 0 0 vlan2
127.0.0.0 * 255.0.0.0 U 0 0 0 lo
169.254.0.0 * 255.255.0.0 U 0 0 0 br0
DD-WRT (10.7.0.2)
root@gw2:~# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default 10.33.93.1 0.0.0.0 UG 0 0 0 vlan2
10.1.0.0 10.7.0.1 255.255.255.0 UG 0 0 0 tap1
10.2.0.0 * 255.255.255.0 U 0 0 0 br0
10.7.0.0 * 255.255.255.0 U 0 0 0 tap1
10.7.0.2 * 255.255.255.255 UH 0 0 0 tap1 < (this one I just added by myself to make routing table is similar to Win)
10.33.93.0 * 255.255.255.0 U 0 0 0 vlan2
127.0.0.0 * 255.0.0.0 U 0 0 0 lo
169.254.0.0 * 255.255.0.0 U 0 0 0 br0