Change Split VPN Network to non-split

Next-generation cloud-hosted OpenVPN business solution.
Post Reply
pchernoff
OpenVpn Newbie
Posts: 5
Joined: Fri Mar 05, 2021 4:11 pm

Change Split VPN Network to non-split

Post by pchernoff » Sat Mar 06, 2021 4:42 pm

I created my first Network in OpenVPN Cloud. I used the default Split Tunnel On. Since the VPN is on the Internet it makes sense to set Split Tunnel Off. I don't see a way to make that change. Do I need to create a new network with Split Tunnel Off?

The normal reason for turning it off is to minimize the VPN traffic going into the office LAN. But since only office traffic would go to the office anyway I prefer providing the greater protection. Unless I misunderstand.

User avatar
openvpn_inc
OpenVPN Inc.
Posts: 1332
Joined: Tue Feb 16, 2021 10:41 am

Re: Change Split VPN Network to non-split

Post by openvpn_inc » Tue Mar 09, 2021 5:47 pm

Hi There,

"Split tunnel OFF" means that you will be redirecting all traffic via OpenVPN Cloud.
But it seems you have not configured any vpn egress on a network connector, it means your OpenVPN Cloud does not have access to internet.
That is why "Split Tunnel OFF" is not available.

So you need to allow "vpn egress" via this network's connector to turn off split tunnel.
To enabled VPN Egress on you Network please check this guide we have: https://openvpn.net/cloud-docs/adding-vpn-egress/?

For more information with OpenVPN Cloud Split tunnel configuration/setup. Check this link: https://openvpn.net/cloud-docs/split-tunnel/


Regards,
Crowley
Image OpenVPN Inc.
Answers provided by OpenVPN Inc. staff members here are provided on a voluntary best-effort basis, and no rights can be claimed on the basis of answers posted in this public forum. If you wish to get official support from OpenVPN Inc. please use the official support ticket system: https://openvpn.net/support

Post Reply