The VPN channel is up, on one of the sides there is a TP-Link TL-WR842n v3 router with OpenWRT 19.07 firmware as a client.The server is OpenVPN Access Server, was not started by me and the settings were made using databases, there are no usual configuration files about which they write in the documentation.
There is a local network behind the router. Computers from both sides see each other, ping passes. At the same time, the router itself acts as a dhcp server behind the router, but I would like this role to be performed by the main DHCP server, which is located on the other side of the VPN. Has anyone done this himself, and if so, can an example be.
The mode is tun, I cannot change to tap.
Ask questions about your Access Server configuration here.
2 posts • Page 1 of 1