I am new to OVPN and have just set up a OVPN as follows:
Server
armv7l GNU/Linux
Dlink NAS - DNS-327L
DNS-327L OpenVPN Package v1.01_03062016
Client Mac Osx- Catalina
client connect
openvpn-connect-3.2.2.1899_signed
I am able to connect from a variety of devices to the server but I am getting an error as follows in the server log.
Code: Select all
Sun Sep 20 11:50:36 2020 xx.xx.xx.xx/xx.xx.xx.xx:60608 SIGTERM[soft,remote-exit] received, client-instance exiting
Sun Sep 20 11:56:00 2020 xx.xx.xx.xx:40130 TLS: Initial packet from [AF_INET]xx.xx.xx.xx:40130, sid=76d8fa16 a2a5d4bc
Sun Sep 20 11:56:01 2020xx.xx.xx.xx:40130 VERIFY OK: depth=1, C=SG, ST=State, L=SG, O=Widgets Inc, OU=IT, CN=xx.xx.xx.xx name=xx.xx.xx.xx emailAddress=yourName@Widgets.com
Sun Sep 20 11:56:01 2020 xx.xx.xx.xx:40130 VERIFY OK: depth=0, C=SG, ST=State, L=SG, O=Widgets Inc, OU=IT, CN=xx.xx.xx.xx name=xx.xx.xx.xx emailAddress=yourName@Widgets.com
Sun Sep 20 11:56:01 2020 xx.xx.xx.xx:40130 Data Channel Encrypt: Cipher 'AES-256-CBC' initialized with 256 bit key
Sun Sep 20 11:56:01 2020 xx.xx.xx.xx:40130 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Sun Sep 20 11:56:01 2020 xx.xx.xx.xx:40130 Data Channel Decrypt: Cipher 'AES-256-CBC' initialized with 256 bit key
Sun Sep 20 11:56:01 2020 xx.xx.xx.xx:40130 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Sun Sep 20 11:56:02 2020 xx.xx.xx.xx:40130 Control Channel: TLSv1.2, cipher TLSv1/SSLv3 DHE-RSA-AES256-GCM-SHA384, 4096 bit RSA
Sun Sep 20 11:56:02 2020 xx.xx.xx.xx:40130 [xx.xx.xx.xx] Peer Connection Initiated with [AF_INET]xx.xx.xx.xx:40130
Sun Sep 20 11:56:02 2020 xx.xx.xx.xx/xx.xx.xx.xx:40130 MULTI_sva: pool returned IPv4=10.8.0.6, IPv6=(Not enabled)
Sun Sep 20 11:56:02 2020 xx.xx.xx.xx/xx.xx.xx.xx:40130 MULTI: Learn: 10.8.0.6 -> xx.xx.xx.xx/xx.xx.xx.xx:40130
Sun Sep 20 11:56:02 2020 xx.xx.xx.xx/xx.xx.xx.xx:40130 MULTI: primary virtual IP for xx.xx.xx.xx/xx.xx.xx.xx:40130: 10.8.0.6
Sun Sep 20 11:56:02 2020 xx.xx.xx.xx7/xx.xx.xx.xx:40130 PUSH: Received control message: 'PUSH_REQUEST'
Sun Sep 20 11:56:02 2020 xx.xx.xx.xx/xx.xx.xx.xx:40130 send_push_reply(): safe_cap=940
Sun Sep 20 11:56:02 2020 xx.xx.xx.xx/xx.xx.xx.xx:40130 SENT CONTROL [xx.xx.xx.xx]:[b][i] 'PUSH_REPLY,dhcp-option DNS 8.8.8.8,redirect-gateway def1,route 10.8.0.1,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5' (status=1)
proto udp
persist-key
persist-tun
verb 3
cipher AES-256-CBC
keepalive 10 120
ifconfig-pool-persist ipp.txt
status /var/log/openvpn-status.log
log /var/log/openvpn.log
port 1199
server 10.8.0.0 255.255.255.0
#push "route 192.168.0.0 255.255.255.0"
push "dhcp-option DNS 8.8.8.8"
push "redirect-gateway def1"
max-clients 100
ca /mnt/HD/HD_a2/Nas_Prog/OpenVPN/genkey/keys/ca.crt
cert /mnt/HD/HD_a2/Nas_Prog/OpenVPN/genkey/keys/server.crt
key /mnt/HD/HD_a2/Nas_Prog/OpenVPN/genkey/keys/server.key
dh /mnt/HD/HD_a2/Nas_Prog/OpenVPN/genkey/keys/dh2048.pem
Note: I am setting this up under port 1199 as I have port forwarded another OVPN I successfully set up on the standard port on a mac mini which work fine. However, I would like to get the NAS OVPN solution working as this will be a better long term option.
I have no idea what the issue is but any help would be appreciated.