Can I add a second interface to the access server that is on the same subnet as the VPN clients?
The OpenVPN has an interface in my DMZ for clients to connect to.
I'd like to add a second interface to the OpenVPN server on a new subnet in our internal network (not DMZ). This new subnet will be the same as the client subnet.
The switch/router will have, for example, 10.10.1.1/24 (so it can route to other subnets), the OpenVPN server will have an interface on this subnet, 10.10.1.2/24 and clients will be assigned 10.10.1.20-10.10.1.200 (for example).
This would simplify routing, sine the client subnet would be "known" to the internal network. The clients and the switch/router will share the L2 network.
Is this setup supported?
Ask questions about your Access Server configuration here.
1 post • Page 1 of 1
- OpenVpn Newbie
- Posts: 3
- Joined: Wed Jul 10, 2019 10:48 pm