VPN two way communication

Ask questions about your Access Server configuration here.
Post Reply
jrosetto
OpenVpn Newbie
Posts: 2
Joined: Wed Dec 27, 2017 3:52 pm

VPN two way communication

Post by jrosetto » Wed Dec 27, 2017 3:57 pm

I have OpenVPN setup on Debian on a tun interface handing out 10.8.0.0/24 to connect remote SIP phones to an Asterisk system. The phone connects to the vpn server and registers with the system as expected. The only issue I have is I cannot connect to the web interface of the phone that is on the vpn from the network that the vpn server is hosted. I'm guessing it has something to do with iptables but I have been unsuccessful so far.

My current iptables configuration is...

iptables -A INPUT -i ens192 -m state --state NEW -p udp --dport 1194 -j ACCEPT

iptables -A INPUT -i tun+ -j ACCEPT

iptables -A FORWARD -i tun+ -j ACCEPT
iptables -A FORWARD -i tun+ -o ens192 -m state --state RELATED,ESTABLISHED -j ACCEPT
iptables -A FORWARD -i ens192 -o tun+ -m state --state RELATED,ESTABLISHED -j ACCEPT

iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o ens192 -j MASQUERADE

iptables -A OUTPUT -o tun+ -j ACCEPT

Any suggestions on how I can access the VPN clients?

Post Reply