OpenVPN Support Forum

Hi,

it is not possible to ping the first router.

Here my configuration:

Router1 = DSL Anschluss
DSL Router, it is not possible to change
Wan:
Lan IP: 192.168.181.1
Gateway: 192.168.181.50
Clients: 192.168.181.xx
Maske: 255.255.255.0
Portforwarding Port 1194 to 192.168.181.100

WLan TP-Link Richtfunkstrecke
Antenne 1: 192.168.181.50, Maske: 255.255.255.0
Antenne 2: 192.168.181.51, Maske: 255.255.255.0

Router2: is connected to Antenne2 at Wan Connector
Linux Router mit Openvpn – Server
WanIP: 192.168.181.100
LanIP: 192.168.184.1
Gateway: 192.168.181.1
Clients: 192.168.184.xx
Maske: 255.255.255.0
VPN: 192.168.185.0
The Firewall is not active at this moment.
I make a Push at the server configuration to
IP : 192.168.184.0 and 192.168.181.0

VPN: 192.168.185.0
VPN Gateway 192.168.185.1
Maske: 255.255.255.0
Push 192.168.184.0
Push 192.168.181.0

If I make a connection via VPN I get the IP:192.168.185.2
than I make
Ping to .185. is OK
Ping to .84. is OK
Ping to .181. is not working, this is my problem..

Tracert 192.168.181.1 Answer: 192.168.185.1 and * ,*,* etc.

If I make a connection via VPN und an start ssh at the 2. Router, In the terminal I can ping the 192.168.181.1

How can I solve my problem?

LG Frank