connected, but cannot ping client from server, nor server from client

Post Reply
OpenVpn Newbie
Posts: 1
Joined: Fri Jan 25, 2019 8:50 pm

connected, but cannot ping client from server, nor server from client

Post by pannonius » Fri Jan 25, 2019 9:23 pm

Hello, everyone!

I installed an openVPN server on FreeBSD 11.2 machine to use windows 7 and 8.1 laptops as a roadwarrior clients. On both laptops have clients with different .ovpn config name (client7 and client8). First I created client8, and - after a while I was able to connect it to server from construction sites off my office. It establishes tunnel --> (server --> client8). After I created a second client (client7) and connected it to server, it works good, but my client8 failed to connect. The client7 leases the address from server, and when ifconfig server, it showed --> The client8 leases the new address from server upon tunnel establishes, but ifconfig server still shows tunnel -->

Advanced IP scanner shows client8 laptop has both addresses and! Of course, at connected client8 to the server, is dead, and is alive host. As the tunnel --> persists, I cannot make any traffic from the client8 ( to the server anymore.

How to establish traffic from both client7 and client8 to the server, and, thus, to the internet?
server configuration:

Code: Select all

port 1194
proto udp
dev tun
ca ca.crt
cert server.crt
key server.key
dh dh.pem
topology subnet
ifconfig-pool-persist ipp.txt
push "route"
push "redirect-gateway def1 bypass-dhcp"
push "dhcp-option DNS"
keepalive 10 120
tls-auth ta.key 0
cipher AES-256-CBC
max-clients 20
user nobody
group nobody
status openvpn-status.log
log-append  openvpn.log
verb 3
mute 20
explicit-exit-notify 1
remote-cert-tls client
management 1194
clent8 configuration:

Code: Select all

dev tun
proto udp
remote 1194
resolv-retry infinite
ca "C:\\Program Files\\OpenVPN\\config\\keys\\ca.crt"
cert "C:\\Program Files\\OpenVPN\\config\\keys\\client8.crt"
key "C:\\Program Files\\OpenVPN\\config\\keys\\client8.key"
remote-cert-tls server
tls-auth "C:\\Program Files\\OpenVPN\\config\\keys\\ta.key" 1
cipher AES-256-CBC
verb 3

I should be on the dev team.
Posts: 950
Joined: Fri Apr 13, 2012 8:43 pm

Re: connected, but cannot ping client from server, nor server from client

Post by novaflash » Fri Jan 25, 2019 10:00 pm

So, this is not the correct board for this problem. Try another board on this forum that does deal with the open source OpenVPN project. This board is specifically for the commercial OpenVPN Access Server project as the name of the board indicates.

Post Reply