Protonvpn and TLSv1.3 ready - ipv6 deployment

This forum is to discuss and rate service providers of OpenVPN and similar services. THIS IS NOT A FREE ADVERTISEMENT. All posts have a poll with a rating of 1 to 5, with 5 being best, to rate the quality of service, etc.
Forum rules
1) You must create a poll with 5 options, Do Not Recommend (1), Poor (2), Acceptable (3), Would Recommend (4), Strongly Recommend (5).
2) This is not a free advertisement for providers, but a place to review those providers.
3) Polls which are found to be doctored by providers will be locked to a rating of 1 and the source of the spoofing will be revealed to all, including Google.
Post Reply
Fun-tech-Sam
OpenVpn Newbie
Posts: 1
Joined: Thu May 21, 2020 2:56 pm

Protonvpn and TLSv1.3 ready - ipv6 deployment

Post by Fun-tech-Sam » Thu May 21, 2020 3:04 pm

Hi,

I just want to inform Protonvpn have deployed TLSv1.3 and will deployed ipv6.



OpenvpnLog parts:


Outgoing Control Channel Authentication: Using 512 bit message hash 'SHA512' for HMAC authentication
Incoming Control Channel Authentication: Using 512 bit message hash 'SHA512' for HMAC authentication
...
Control Channel: TLSv1.3, cipher TLSv1.3 TLS_AES_256_GCM_SHA384, 4096 bit RSA
...

I have test ipv6 but this is not fully deployed. TLSv1.3 is not all servers actually.

They will provide Wireguard in the near futur. (Wireguard is actually v0.1 on Windows...).

Regards

Post Reply