Windows 10 Client using LAN Network TAP Bridge error code 1 ???

How to customize and extend your OpenVPN installation.
Post Reply
seanvree
OpenVPN User
Posts: 12
Joined: Thu Jul 21, 2016 10:40 pm

Windows 10 Client using LAN Network TAP Bridge error code 1 ???

Post by seanvree » Sun Jul 24, 2016 8:54 pm

VPN Server:

Azire VPN

Router:

Netgear R7000 running DDWRT

Client:
Windows 10 Enterprise
2 1GB Intel NICs

Ethernet interface config:

Ethernet adapter S1219: (Static primary NIC)
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) Ethernet Connection (2) I219-V
Physical Address. . . . . . . . . : 40-8D-5C-B7-2C-7B
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2601:602:9a01:b5e:55e9:e78f:9fcc:e5d3(Preferred)
Temporary IPv6 Address. . . . . . : 2601:602:9a01:b5e:a846:dc4f:5ea4:11fa(Preferred)
Link-local IPv6 Address . . . . . : fe80::55e9:e78f:9fcc:e5d3%18(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.20(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : fe80::e6f4:c6ff:fe1d:885b%18
192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 155225436
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1E-BC-A1-67-40-8D-5C-B7-2C-7B
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled

EthernetVPN: Bridge:
11...00 ff 5d 3c 18 0f
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : TAP-Windows Adapter V9
Physical Address. . . . . . . . . : 00-FF-5D-3C-18-0F
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2606:ed00:4786:21::10ed(Preferred)
Link-local IPv6 Address . . . . . : fe80::5931:22b4:131e:f138%10(Preferred)
IPv4 Address. . . . . . . . . . . : 10.77.1.239(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Thursday, July 21, 2016 7:46:24 PM
Lease Expires . . . . . . . . . . : Friday, July 21, 2017 7:46:24 PM
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 10.77.1.254
DHCPv6 IAID . . . . . . . . . . . : 218169181
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1E-BC-A1-67-40-8D-5C-B7-2C-7B
DNS Servers . . . . . . . . . . . : 199.71.232.194
NetBIOS over Tcpip. . . . . . . . : Enabled

The two following NIC Interfaces make up the bridge:

Ethernet adapter V1211: (Bridged)
Connection-specific DNS Suffix . : vree
Description . . . . . . . . . . . : Intel(R) I211 Gigabit Network Connection
Physical Address. . . . . . . . . : 40-8D-5C-B7-2C-79
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2601:602:9a01:b5e:7c8b:c22d:7d66:a9d7(Preferred)
Temporary IPv6 Address. . . . . . : 2601:602:9a01:b5e:b5bc:c983:38fc:da26(Preferred)
Link-local IPv6 Address . . . . . : fe80::7c8b:c22d:7d66:a9d7%10(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.75(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Sunday, July 24, 2016 1:34:21 PM
Lease Expires . . . . . . . . . . : Monday, July 25, 2016 1:34:22 PM
Default Gateway . . . . . . . . . : fe80::e6f4:c6ff:fe1d:885b%10
192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 641764700
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1E-BC-A1-67-40-8D-5C-B7-2C-7B
DNS Servers . . . . . . . . . . . : 8.8.8.8
208.67.222.222
104.238.153.178
NetBIOS over Tcpip. . . . . . . . : Disabled

Ethernet adapter tapbridge: (Bridged)
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Network Adapter Multiplexor Driver
Physical Address. . . . . . . . . : 00-FF-22-0C-AD-B5
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2601:602:9a01:b5e:4cee:2581:d18b:fead(Preferred)
IPv6 Address. . . . . . . . . . . : 2606:ed00:4786:21::10ed(Preferred)
Temporary IPv6 Address. . . . . . : 2601:602:9a01:b5e:dd7a:3ebc:c315:ea26(Preferred)
Link-local IPv6 Address . . . . . : fe80::4cee:2581:d18b:fead%25(Preferred)
IPv4 Address. . . . . . . . . . . : 10.77.1.239(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 2606:ed00:4786:21::1
fe80::e6f4:c6ff:fe1d:885b%25
10.77.1.0
DHCPv6 IAID . . . . . . . . . . . : 440438108
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1E-BC-A1-67-40-8D-5C-B7-2C-7B
DNS Servers . . . . . . . . . . . : 199.71.232.194
8.8.8.8
NetBIOS over Tcpip. . . . . . . . : Enabled


OpenVPN Client config:
client
dev tap
dev-node vpntap
proto udp
remote us.ovpn.azirevpn.net 1194
remote us.ovpn.azirevpn.net 443
remote-random
resolv-retry infinite
auth-user-pass auth.txt
nobind
persist-key
persist-tun
tun-ipv6
remote-cert-tls server
reneg-sec 0
keepalive 10 60
mute-replay-warnings
explicit-exit-notify 3
verb 3
cipher AES-256-CBC
auth SHA512
tls-cipher TLS-DHE-RSA-WITH-AES-256-CBC-SHA
setenv CLIENT_CERT 0


Routing Table:
C:\WINDOWS\system32>route print
===========================================================================
Interface List
18...40 8d 5c b7 2c 7b ......Intel(R) Ethernet Connection (2) I219-V
33...00 ff 22 0c ad b5 ......Microsoft Network Adapter Multiplexor Driver
20...00 50 56 c0 00 01 ......VMware Virtual Ethernet Adapter for VMnet1
27...00 50 56 c0 00 08 ......VMware Virtual Ethernet Adapter for VMnet8
14...a4 34 d9 60 0e db ......Bluetooth PAN HelpText
1...........................Software Loopback Interface 1
19...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter
13...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2
7...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #4
6...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #5
8...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
===========================================================================

IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.20 258
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.24 266
0.0.0.0 0.0.0.0 10.77.1.0 192.168.1.24 266
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
192.168.1.0 255.255.255.0 On-link 192.168.1.20 258
192.168.1.0 255.255.255.0 On-link 192.168.1.24 266
192.168.1.20 255.255.255.255 On-link 192.168.1.20 258
192.168.1.24 255.255.255.255 On-link 192.168.1.24 266
192.168.1.255 255.255.255.255 On-link 192.168.1.20 258
192.168.1.255 255.255.255.255 On-link 192.168.1.24 266
192.168.26.0 255.255.255.0 On-link 192.168.26.1 276
192.168.26.1 255.255.255.255 On-link 192.168.26.1 276
192.168.26.255 255.255.255.255 On-link 192.168.26.1 276
192.168.64.0 255.255.255.0 On-link 192.168.64.1 276
192.168.64.1 255.255.255.255 On-link 192.168.64.1 276
192.168.64.255 255.255.255.255 On-link 192.168.64.1 276
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 192.168.26.1 276
224.0.0.0 240.0.0.0 On-link 192.168.64.1 276
224.0.0.0 240.0.0.0 On-link 192.168.1.20 258
224.0.0.0 240.0.0.0 On-link 192.168.1.24 266
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 192.168.26.1 276
255.255.255.255 255.255.255.255 On-link 192.168.64.1 276
255.255.255.255 255.255.255.255 On-link 192.168.1.20 258
255.255.255.255 255.255.255.255 On-link 192.168.1.24 266
===========================================================================
Persistent Routes:
Network Address Netmask Gateway Address Metric
0.0.0.0 0.0.0.0 192.168.1.1 Default
0.0.0.0 0.0.0.0 192.168.1.1 Default
0.0.0.0 0.0.0.0 10.77.1.0 Default
===========================================================================

IPv6 Route Table
===========================================================================
Active Routes:
If Metric Network Destination Gateway
18 258 ::/0 fe80::e6f4:c6ff:fe1d:885b
33 266 ::/0 2606:ed00:4786:21::1
33 266 ::/0 fe80::e6f4:c6ff:fe1d:885b
1 306 ::1/128 On-link
18 258 2601:602:9a01:b5e::/64 On-link
33 266 2601:602:9a01:b5e::/64 On-link
18 258 2601:602:9a01:b5e:55e9:e78f:9fcc:e5d3/128
On-link
33 266 2601:602:9a01:b5e:7115:6f83:a7c5:95ce/128
On-link
33 266 2601:602:9a01:b5e:8ddb:cfc3:d889:c255/128
On-link
18 258 2601:602:9a01:b5e:a846:dc4f:5ea4:11fa/128
On-link
33 266 2606:ed00:4786:21::/64 On-link
33 266 2606:ed00:4786:21::10ed/128
On-link
20 276 fe80::/64 On-link
27 276 fe80::/64 On-link
18 258 fe80::/64 On-link
33 266 fe80::/64 On-link
18 258 fe80::55e9:e78f:9fcc:e5d3/128
On-link
33 266 fe80::7115:6f83:a7c5:95ce/128
On-link
27 276 fe80::94ad:4c9a:13c8:7b35/128
On-link
20 276 fe80::bc9c:8afc:db14:fc2e/128
On-link
1 306 ff00::/8 On-link
20 276 ff00::/8 On-link
27 276 ff00::/8 On-link
18 258 ff00::/8 On-link
33 266 ff00::/8 On-link
===========================================================================
Persistent Routes:
If Metric Network Destination Gateway
0 4294967295 ::/0 2606:ed00:4786:21::1
===========================================================================


Purpose:

I'm trying to direct all LAN traffic thru the 1st NIC and all internet traffic thru the VPN Bridge.

I've been using this article as a reference:
https://openvpn.net/index.php/open-sour ... dging.html

Problem:
When I connect via the Open VPN interface this is my log:
Sun Jul 24 13:46:38 2016 OpenVPN 2.3.11 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [PKCS11] [IPv6] built on May 10 2016
Sun Jul 24 13:46:38 2016 Windows version 6.2 (Windows 8 or greater) 64bit
Sun Jul 24 13:46:38 2016 library versions: OpenSSL 1.0.1t 3 May 2016, LZO 2.09
Enter Management Password:
Sun Jul 24 13:46:38 2016 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:25340
Sun Jul 24 13:46:38 2016 Need hold release from management interface, waiting...
Sun Jul 24 13:46:38 2016 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:25340
Sun Jul 24 13:46:38 2016 MANAGEMENT: CMD 'state on'
Sun Jul 24 13:46:38 2016 MANAGEMENT: CMD 'log all on'
Sun Jul 24 13:46:38 2016 MANAGEMENT: CMD 'hold off'
Sun Jul 24 13:46:38 2016 MANAGEMENT: CMD 'hold release'
Sun Jul 24 13:46:38 2016 Control Channel Authentication: tls-auth using INLINE static key file
Sun Jul 24 13:46:38 2016 Outgoing Control Channel Authentication: Using 512 bit message hash 'SHA512' for HMAC authentication
Sun Jul 24 13:46:38 2016 Incoming Control Channel Authentication: Using 512 bit message hash 'SHA512' for HMAC authentication
Sun Jul 24 13:46:38 2016 Socket Buffers: R=[65536->65536] S=[65536->65536]
Sun Jul 24 13:46:38 2016 MANAGEMENT: >STATE:1469393198,RESOLVE,,,
Sun Jul 24 13:46:39 2016 UDPv4 link local: [undef]
Sun Jul 24 13:46:39 2016 UDPv4 link remote: [AF_INET]199.71.232.194:443
Sun Jul 24 13:46:39 2016 MANAGEMENT: >STATE:1469393199,WAIT,,,
Sun Jul 24 13:46:39 2016 MANAGEMENT: >STATE:1469393199,AUTH,,,
Sun Jul 24 13:46:39 2016 TLS: Initial packet from [AF_INET]199.71.232.194:443, sid=792f7b96 c4a6540b
Sun Jul 24 13:46:39 2016 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
Sun Jul 24 13:46:39 2016 VERIFY OK: depth=1, C=US, ST=Florida, L=Miami, O=AzireVPN, OU=AzireVPN, CN=us.ovpn.azirevpn.net, name=AzireVPN, emailAddress=info@azirevpn.com
Sun Jul 24 13:46:39 2016 Validating certificate key usage
Sun Jul 24 13:46:39 2016 ++ Certificate has key usage 00a0, expects 00a0
Sun Jul 24 13:46:39 2016 VERIFY KU OK
Sun Jul 24 13:46:39 2016 Validating certificate extended key usage
Sun Jul 24 13:46:39 2016 ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication
Sun Jul 24 13:46:39 2016 VERIFY EKU OK
Sun Jul 24 13:46:39 2016 VERIFY OK: depth=0, C=US, ST=Florida, L=Miami, O=AzireVPN, OU=AzireVPN, CN=us.ovpn.azirevpn.net, name=AzireVPN, emailAddress=info@azirevpn.com
Sun Jul 24 13:46:39 2016 WARNING: 'dev-type' is used inconsistently, local='dev-type tap', remote='dev-type tun'
Sun Jul 24 13:46:39 2016 WARNING: 'link-mtu' is used inconsistently, local='link-mtu 1633', remote='link-mtu 1601'
Sun Jul 24 13:46:39 2016 WARNING: 'tun-mtu' is used inconsistently, local='tun-mtu 1532', remote='tun-mtu 1500'
Sun Jul 24 13:46:39 2016 Data Channel Encrypt: Cipher 'AES-256-CBC' initialized with 256 bit key
Sun Jul 24 13:46:39 2016 Data Channel Encrypt: Using 512 bit message hash 'SHA512' for HMAC authentication
Sun Jul 24 13:46:39 2016 Data Channel Decrypt: Cipher 'AES-256-CBC' initialized with 256 bit key
Sun Jul 24 13:46:39 2016 Data Channel Decrypt: Using 512 bit message hash 'SHA512' for HMAC authentication
Sun Jul 24 13:46:39 2016 Control Channel: TLSv1.2, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 2048 bit RSA
Sun Jul 24 13:46:39 2016 [us.ovpn.azirevpn.net] Peer Connection Initiated with [AF_INET]199.71.232.194:443
Sun Jul 24 13:46:40 2016 MANAGEMENT: >STATE:1469393200,GET_CONFIG,,,
Sun Jul 24 13:46:41 2016 SENT CONTROL [us.ovpn.azirevpn.net]: 'PUSH_REQUEST' (status=1)
Sun Jul 24 13:46:41 2016 PUSH: Received control message: 'PUSH_REPLY,ifconfig-ipv6 2606:ed00:4786:21::10ed/64 2606:ed00:4786:21::1,dhcp-option DNS 199.71.232.194,redirect-gateway def1,redirect-gateway ipv6,route-ipv6 2000::/3,tun-ipv6,route-gateway 10.77.1.1,topology subnet,ping 3,ping-restart 15,ifconfig 10.77.1.239 255.255.255.0'
Sun Jul 24 13:46:41 2016 Options error: unknown --redirect-gateway flag: ipv6
Sun Jul 24 13:46:41 2016 OPTIONS IMPORT: timers and/or timeouts modified
Sun Jul 24 13:46:41 2016 OPTIONS IMPORT: --ifconfig/up options modified
Sun Jul 24 13:46:41 2016 OPTIONS IMPORT: route options modified
Sun Jul 24 13:46:41 2016 OPTIONS IMPORT: route-related options modified
Sun Jul 24 13:46:41 2016 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified
Sun Jul 24 13:46:41 2016 ROUTE_GATEWAY 192.168.1.1/255.255.255.0 I=33 HWADDR=00:ff:22:0c:ad:b5
Sun Jul 24 13:46:41 2016 ROUTE6: default_gateway=UNDEF
Sun Jul 24 13:46:41 2016 do_ifconfig, tt->ipv6=1, tt->did_ifconfig_ipv6_setup=1
Sun Jul 24 13:46:41 2016 MANAGEMENT: >STATE:1469393201,ASSIGN_IP,,10.77.1.239,
Sun Jul 24 13:46:42 2016 NETSH: C:\WINDOWS\system32\netsh.exe interface ipv6 set address interface=4 2606:ed00:4786:21::10ed store=active
Sun Jul 24 13:46:42 2016 ERROR: netsh command failed: returned error code 1
Sun Jul 24 13:46:47 2016 NETSH: C:\WINDOWS\system32\netsh.exe interface ipv6 set address interface=4 2606:ed00:4786:21::10ed store=active
Sun Jul 24 13:46:47 2016 ERROR: netsh command failed: returned error code 1
Sun Jul 24 13:46:52 2016 NETSH: C:\WINDOWS\system32\netsh.exe interface ipv6 set address interface=4 2606:ed00:4786:21::10ed store=active
Sun Jul 24 13:46:52 2016 ERROR: netsh command failed: returned error code 1
Sun Jul 24 13:46:57 2016 NETSH: C:\WINDOWS\system32\netsh.exe interface ipv6 set address interface=4 2606:ed00:4786:21::10ed store=active
Sun Jul 24 13:46:57 2016 ERROR: netsh command failed: returned error code 1
Sun Jul 24 13:47:01 2016 MANAGEMENT: Client disconnected
Sun Jul 24 13:47:01 2016 NETSH: command failed
Sun Jul 24 13:47:01 2016 Exiting due to fatal error


Essentially, the software is trying to push the iPv6 config to the interface 4, which doesn't exist!! That's the main problem. Where is it getting interface=4? It should be pushing those setting to interface 33 (which is the VPN/TAP bridge, correct?) If I run the NET NETSH manually thru an elevated CMD prompt, I get the same error, however, if I use the same command but use interface 33, it's fine! So why is it trying to push to interface 4?


If I disconnect the VPN bridge and use ONLY the VPN TAB device, it connects fine.

Things I've tried:

- Using different VPN software: FAI
- running NETSH command from elevated command prompt: FAIL
- Removing all NICs and reinstalling: Same error

I'm stuck!

Please help!

User avatar
TinCanTech
OpenVPN Protagonist
Posts: 2992
Joined: Fri Jun 03, 2016 1:17 pm

Re: Windows 10 Client using LAN Network TAP Bridge error code 1 ???

Post by TinCanTech » Mon Jul 25, 2016 10:13 am

76-ethernet-bridging.html wrote:When you set up an ethernet bridge, you should manually set the IP address and subnet of the bridge interface and not use an ifconfig directive in the OpenVPN config. This is because unlike a TUN/TAP interface, OpenVPN cannot programmatically set the IP address and netmask of a bridge interface

seanvree
OpenVPN User
Posts: 12
Joined: Thu Jul 21, 2016 10:40 pm

Re: Windows 10 Client using LAN Network TAP Bridge error code 1 ???

Post by seanvree » Mon Jul 25, 2016 8:00 pm

TinCanTech wrote:
76-ethernet-bridging.html wrote:When you set up an ethernet bridge, you should manually set the IP address and subnet of the bridge interface and not use an ifconfig directive in the OpenVPN config. This is because unlike a TUN/TAP interface, OpenVPN cannot programmatically set the IP address and netmask of a bridge interface

Right, I did this. I set both the IPv4 and IPv6..but it still throws that error?

seanvree
OpenVPN User
Posts: 12
Joined: Thu Jul 21, 2016 10:40 pm

Re: Windows 10 Client using LAN Network TAP Bridge error code 1 ???

Post by seanvree » Mon Jul 25, 2016 8:23 pm

seanvree wrote:
TinCanTech wrote:
76-ethernet-bridging.html wrote:When you set up an ethernet bridge, you should manually set the IP address and subnet of the bridge interface and not use an ifconfig directive in the OpenVPN config. This is because unlike a TUN/TAP interface, OpenVPN cannot programmatically set the IP address and netmask of a bridge interface

Right, I did this. I set both the IPv4 and IPv6..but it still throws that error?

I go into the Bridge IPv6 Settings, and manually set the static IPv6 Address as follows:

2606:ed00:4786:24::10f8
Subnet Prefix: 64
Default Gateway: 2606:ed00:4786:21::1

DNS is blank

Then, I try to connect, and I get this error:

Mon Jul 25 13:18:22 2016 NETSH: C:\WINDOWS\system32\netsh.exe interface ipv6 set address interface=7 2606:ed00:4786:24::10f8 store=active
Mon Jul 25 13:18:22 2016 ERROR: netsh command failed: returned error code 1

I don't understand?

User avatar
TinCanTech
OpenVPN Protagonist
Posts: 2992
Joined: Fri Jun 03, 2016 1:17 pm

Re: Windows 10 Client using LAN Network TAP Bridge error code 1 ???

Post by TinCanTech » Mon Jul 25, 2016 9:29 pm

seanvree wrote:OpenVPN cannot programmatically set the IP address and netmask of a bridge interface
Do not push any IP to the client ..

seanvree
OpenVPN User
Posts: 12
Joined: Thu Jul 21, 2016 10:40 pm

Re: Windows 10 Client using LAN Network TAP Bridge error code 1 ???

Post by seanvree » Mon Jul 25, 2016 10:35 pm

TinCanTech wrote:
seanvree wrote:OpenVPN cannot programmatically set the IP address and netmask of a bridge interface
Do not push any IP to the client ..
Right, so how do I change that setting so that openVPN doesn't?

User avatar
TinCanTech
OpenVPN Protagonist
Posts: 2992
Joined: Fri Jun 03, 2016 1:17 pm

Re: Windows 10 Client using LAN Network TAP Bridge error code 1 ???

Post by TinCanTech » Mon Jul 25, 2016 10:40 pm

You mean: How do I setup OpenVPN Wrong ?

seanvree
OpenVPN User
Posts: 12
Joined: Thu Jul 21, 2016 10:40 pm

Re: Windows 10 Client using LAN Network TAP Bridge error code 1 ???

Post by seanvree » Mon Jul 25, 2016 10:41 pm

TinCanTech wrote:You mean: How do I setup OpenVPN Wrong ?

Dude, I'm no expert obviously.

I'm simply trying to route VPN traffic thru the second NIC. I'm all ears if you have a better solution.

seanvree
OpenVPN User
Posts: 12
Joined: Thu Jul 21, 2016 10:40 pm

Re: Windows 10 Client using LAN Network TAP Bridge error code 1 ???

Post by seanvree » Wed Jul 27, 2016 11:07 pm

Still looking for some help. I'm willing to pay someone to help do it via RDC. I'll pay you via paypal.

User avatar
TinCanTech
OpenVPN Protagonist
Posts: 2992
Joined: Fri Jun 03, 2016 1:17 pm

Re: Windows 10 Client using LAN Network TAP Bridge error code 1 ???

Post by TinCanTech » Wed Jul 27, 2016 11:27 pm

Under the circumstances .. tincanteksup <at> gmail

seanvree
OpenVPN User
Posts: 12
Joined: Thu Jul 21, 2016 10:40 pm

Re: Windows 10 Client using LAN Network TAP Bridge error code 1 ???

Post by seanvree » Fri Jul 29, 2016 6:25 pm

TinCanTech wrote:Under the circumstances .. tincanteksup <at> gmail
Sent you an email.

seanvree
OpenVPN User
Posts: 12
Joined: Thu Jul 21, 2016 10:40 pm

Re: Windows 10 Client using LAN Network TAP Bridge error code 1 ???

Post by seanvree » Sun Jul 31, 2016 10:59 pm

So update to my issue, I made a bit of progress:

I was able to figure out that that this has to do with IPv6.

My VPN DOES support IPv6 (Azire),

However, when I connect with IPv6 all my ports that are configured in Windows are no longer open, despite being configured at the router and in the Windows Firewall. I also know it's not a windows firewall issue because if I disable it, it still doesn't work.

I've been following this article about port forwarding:

https://social.technet.microsoft.com/Fo ... networking

So I know I need to forward the ports manually when the VPN is connected, but I'm confused as to which adapters to forward FROM and TO.

Am I forwarding from the IP address of the VPN to the Local LAN card? Or to the Router?

Will this even work with IPv6?

Anyone with ideas?

Post Reply