openvpn-install-2.3.6-I603-x86_64

This is the forum to post your config. Include diagrams, usage graphs, and all the other goodies to show off your network.
Post Reply
niroberto
OpenVpn Newbie
Posts: 3
Joined: Thu Jun 04, 2015 6:41 am

openvpn-install-2.3.6-I603-x86_64

Post by niroberto » Thu Jun 04, 2015 3:06 pm

Good morning,
I've already installed open vpn, 2.3.1.0 version, on the pc with operative system Windows XP such a server and now it's regularly active and connected.

I've just installed the open vpn 2.3.6-I603-x86_64 on the computer that make client with operative system Windows 7 and after the copy of configuration file I open the OpenVPN GUI and on the display appear this message:

"Errore nella creazione della chiave HKLM\SOFTWARE|OpenVPN-GUI"

Someone can help me?

Thanks

This is my client configuration file

# Specify that we are a client and that we
# will be pulling certain config file directives
# from the server.
client

# Use the same setting as you are using on
# the server.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
dev tap
;dev tun

# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel
# if you have more than one. On XP SP2,
# you may need to disable the firewall
# for the TAP adapter.
dev-node "SparinaVPN"

# Are we connecting to a TCP or
# UDP server? Use the same setting as
# on the server.
;proto tcp
proto udp

# The hostname/IP and port of the server.
# You can have multiple remote entries
# to load balance between the servers.
remote XX.XXX.XX.XX 1194
;remote my-server-2 1194

# Choose a random host from the remote
# list for load-balancing. Otherwise
# try hosts in the order specified.
;remote-random

# Keep trying indefinitely to resolve the
# host name of the OpenVPN server. Very useful
# on machines which are not permanently connected
# to the internet such as laptops.
resolv-retry infinite

# Most clients don't need to bind to
# a specific local port number.
nobind

# Downgrade privileges after initialization (non-Windows only)
;user nobody
;group nobody

# Try to preserve some state across restarts.
persist-key
persist-tun

# If you are connecting through an
# HTTP proxy to reach the actual OpenVPN
# server, put the proxy server/IP and
# port number here. See the man page
# if your proxy server requires
# authentication.
;http-proxy-retry # retry on connection failures
;http-proxy [proxy server] [proxy port #]

# Wireless networks often produce a lot
# of duplicate packets. Set this flag
# to silence duplicate packet warnings.
;mute-replay-warnings

# SSL/TLS parms.
# See the server config file for more
# description. It's best to use
# a separate .crt/.key file pair
# for each client. A single ca
# file can be used for all clients.
ca ca.crt
cert Roberto.crt
key Roberto.key

# Verify server certificate by checking that the
# certicate has the correct key usage set.
# This is an important precaution to protect against
# a potential attack discussed here:
# http://openvpn.net/howto.html#mitm
#
# To use this feature, you will need to generate
# your server certificates with the keyUsage set to
# digitalSignature, keyEncipherment
# and the extendedKeyUsage to
# serverAuth
# EasyRSA can do this for you.
ns-cert-type server

# If a tls-auth key is used on the server
# then every client must also have the key.
tls-auth key.txt 1

# Select a cryptographic cipher.
# If the cipher option is used on the server
# then you must also specify it here.
;cipher x

# Enable compression on the VPN link.
# Don't enable this unless it is also
# enabled in the server config file.
comp-lzo

# Set log file verbosity.
verb 3

# Silence repeating messages
;mute 20

Post Reply