Page 1 of 1
Create unidentified network with speed 100 megabytes
Posted: Tue Jan 08, 2019 12:06 pm
by Anthonyqueen1985
Good morning,
I connect my openvpn between a Nas synology and my computer in my job... The server is my Nas synology and the client is the computer. I can connect successfully but It creates unidentified network with speed 100 megabytes (The adapter is TAP WINDOWS ADAPTER V9) but my local red is 1gb.
I have isp movistar with 600 megabytes symmetrical in my house and in my job is the same isp with 300 megabytes symmetrical but the test speed leaves 50 megabytes of download and 110 megabytes of upload. Please I need to clarify it because I think don´t understand well.
Best Regards,
Re: Create unidentified network with speed 100 megabytes
Posted: Tue Jan 08, 2019 12:24 pm
by TinCanTech
The current TAP driver displays 100mb link speed and the new one will display 1gb link speed.
But the link speed is only a value in a field and the driver will run at what ever speed is available by your system.
Re: Create unidentified network with speed 100 megabytes
Posted: Tue Jan 08, 2019 12:29 pm
by Anthonyqueen1985
Then, why I cannot reach more speed in download and upload? When I connect OPENVPN in my job I connect my folders of the nas and I have tested in both directions but I only reach 3.5 megabytes in download from nas to the computer and 8 megabytes from job to Nas.... I speak about files type films for example. Any idea how to improve this trouble?
Best Regards,
Re: Create unidentified network with speed 100 megabytes
Posted: Tue Jan 08, 2019 1:07 pm
by TinCanTech
Problems with speed are very common and the causes vary widely.
Anthonyqueen1985 wrote: ↑Tue Jan 08, 2019 12:29 pm
Any idea how to improve this trouble?
As a test, place your client computer in the same LAN as your server and connect directly then test the speed. You should be able to max out the VPN speed (more or less). I get ~24Mbit/sec on a 54Mbit WLAN.
Further reading:
https://community.openvpn.net/openvpn/w ... orks_Linux
Re: Create unidentified network with speed 100 megabytes
Posted: Wed Jan 09, 2019 7:36 am
by Anthonyqueen1985
In the edit config I remove '#' redirect-gateway def1 and in the website whichismyip I can see the ip public of my house where is the server. Then, I don´t know if I understand or not. If I do the test of speed I can get 55mbt/sec download and 115 mbit/sec of upload. The bottlekneck is the client in my office here we have 300mbit symmetrical.
Please this speed is normal with openvpn or I should have more speed ??. If I download or upload something I get 3.5mbit/sec and 8mbit/Sec.
Please give me more solutions or clarifications.
Best Regards,
Re: Create unidentified network with speed 100 megabytes
Posted: Wed Jan 09, 2019 2:43 pm
by TinCanTech
Maybe you have a problem with your MTU .. see --fragment in the manual.
Re: Create unidentified network with speed 100 megabytes
Posted: Thu Jan 10, 2019 2:27 pm
by Anthonyqueen1985
Please could you be so kind how to do it? I am not sure how to do it.
Best Regards,
Re: Create unidentified network with speed 100 megabytes
Posted: Thu Jan 10, 2019 6:59 pm
by Pippin
Which model Synology DS and which CPU?
Re: Create unidentified network with speed 100 megabytes
Posted: Fri Jan 11, 2019 7:32 am
by Anthonyqueen1985
The model synology DS is RS815+ and the cpu is Intel (R) Core (TM) i5-4460 CPU @ 3.20GHz 16gb RAM IN W7 64BIT professional.