Hi, i has been reading the guides for configure openvpn server but, I have some problems,
I have Windows 2003 Server (SP2) with OpenVPN installed, (server OpenVPN)
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : 192.168.1.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
server.ovpn
port 1194
proto tcp
dev tun
server 10.0.0.0 255.255.255.0
ca ca.crt
cert server.crt
key server.key
dh dh1024.pem
push "redirect-gateway def1"
push "dhcp-option DNS 8.8.8.8"
#the following commands are optional
keepalive 10 120
comp-lzo
persist-key
persist-tun
verb 3
Additional steps are done
Start -> Right-click My Computer -> Manage
Services
Right-click Routing and Remote Access -> Properties -> Automatic
Right-click Routing and Remote Access -> Start
Next:
Control Panel
Network Connections
Local Area Connection (or whichever is your primary Internet interface [with your WAN ip])
Properties
Advanced
Tick the box "Allow other network users to connect through this computer's Internet connection"
From the drop-down list select "Local Area Connection 2", or whatever is the connection name of your TAP OpenVPN server interface.
Start->run->regedit (you type regedit)*
Key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
Value: IPEnableRouter
Type: REG_DWORD
Data: 0x00000001 (1)
When OpenVPN is working in server mode
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : 192.168.1.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
Ethernet adapter OpenVPN Connection:
Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : 10.0.0.1
Subnet Mask . . . . . . . . . . . : 255.255.255.252
Default Gateway . . . . . . . . . :
The client, the client is Windows XP or Windows 7 in the two, I have the same problem with default gateway
client.opvn
client
dev tun
proto tcp
remote remote-host.com 1194
resolv-retry infinite
nobind
persist-key
persist-tun
ca ca.crt
cert client.crt
key client.key
ns-cert-type server
comp-lzo
verb 3
#explicit-exit-notify 2 # only for UDP connections
ping 10
ping-restart 60
route-method exe
route-delay 2
The connection is successful, but I cannot surfing on internet, when i do ping to google for example i dont have reply
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : 10.10.1.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.10.1.1
Ethernet adapter Local Area Connection 2 (OpenVPN):
Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : 10.0.0.10
Subnet Mask . . . . . . . . . . . : 255.255.255.252
Default Gateway . . . . . . . . . : 10.0.0.9 <<<<< I think that Default Gateway is incorrect
If I do ping to 10.0.0.1 I get reply
PS C:\Users\zyklonudo> ping 10.0.0.1
Pinging 10.0.0.1 with 32 bytes of data:
Reply from 10.0.0.1: bytes=32 time<1ms TTL=128
Reply from 10.0.0.1: bytes=32 time<1ms TTL=128
Reply from 10.0.0.1: bytes=32 time<1ms TTL=128
Reply from 10.0.0.1: bytes=32 time<1ms TTL=128
but if I do ping to other address i don't get reply.
I don't know because this problems..., some idea????
