Good morning all right with you people?
The thing is ... to a problem that seems kind of silly but to break the head few days ago, I have an OpenVPN server running and now I need to connect a client OpenVPN Linux (Debian) to the server.
It connects you usually send pings through the client server to a system that is in the LAN2 network or even the other end of the VPN, I need only hosts accessing the server from LAN1 to LAN2 in this TS and vice versa because the TS server has to communicate with hosts on LAN1.
So far OK, I create servers in the following routes:
LAN1: 192.168.1.3/32 route add-host 192.168.3.61 gw
LAN2: route add-net 192.168.0.0/24 gw 192.168.3.62
Only that when I create a route to network 192.168.0.0/24 (LAN2) pointing to the IP of the VPN client server theoretically the corresponding line of the route command output interface should be the tun0 but he is as ppp0 or it always comes out by default.
The line of the route command that said:
192.168.0.0 192.168.3.61 255.255.255.0 UG 0 0 0 ppp0
Follow the link structure where I am with this problem:
http://imageshack.us/photo/my-images/819/estruturap.jpg/
Hugs.
Att,
Pablo Mesquita
