Hi Folks,
I want to be able to access my lan from my tablet or my laptop when away. I have a router running dd-wrt and am trying to use the server daemon to run the openvpn server. I followed a guide to create the certs and config at
http://www.howtogeek.com/64433/how-to-install-and-configure-openvpn-on-your-dd-wrt-router/. I can't however get my client to connect. I've tried from a couple of WAN sources as well as from on the LAN. I also put in a firewall entry in the router to allow for the port. Also also, when I ping bonzor.mooo.com I do see the correct IP. I put my log (verb 6) on pastebin with the server address and port changed because I didn't want to post those on the internet.
http://pastebin.com/LKjTp2J1 is where the log is.
Here's my client config:
client
dev tun
proto udp
remote bonzor.mooo.com 11094
resolv-retry infinite
nobind
persist-key
persist-tun
ca ca.crt
cert josh.crt
key josh.key
ns-cert-type server
comp-lzo
verb 6
And my server config:
push route "192.168.1.0 255.255.255.0"
server 10.8.0.0 255.255.255.0
dev tun0
proto udp
keepalive 10 120
dh /tmp/openvpn/dh.pem
ca /tmp/openvpn/ca.crt
cert /tmp/openvpn/cert.pem
key /tmp/openvpn/key.pem
management localhost 5001
Here's my firewall commands in dd-wrt which the guide suggested:
iptables -I INPUT 1 -p udp -dport=11094 -j ACCEPT
iptables -I FORWARD 1 -source=192.168.1.0/24 -j ACCEPT
iptables -I FORWARD -i br0 -o tun0 -j ACCEPT
iptables -I FORWARD -i tun0 -o br0 -j ACCEPT
I also have a question regarding if I am supposed to have a "TUN" ethernet adapter showing... I only have a "TAP-Win32 Adapter V9" which never shows as connected.
Thank you!!
