Jane
My OpenVPN client connects to OpenVPN server but I would like to use TightVNC so that I can control the server from my client.Is that possible?
Here is the conversation between client and server
56-SHA, 1024 bit RSA
Mon Nov 14 08:54:13 2011 [TEST1] Peer Connection Initiated with 88.80.57.39:1194
Mon Nov 14 08:54:15 2011 SENT CONTROL [TEST1]: 'PUSH_REQUEST' (status=1)
Mon Nov 14 08:54:15 2011 PUSH: Received control message: 'PUSH_REPLY,route 10.8.
0.1,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5'
Mon Nov 14 08:54:15 2011 OPTIONS IMPORT: timers and/or timeouts modified
Mon Nov 14 08:54:15 2011 OPTIONS IMPORT: --ifconfig/up options modified
Mon Nov 14 08:54:15 2011 OPTIONS IMPORT: route options modified
Mon Nov 14 08:54:15 2011 ROUTE default_gateway=192.168.2.1
Mon Nov 14 08:54:15 2011 TAP-WIN32 device [ SERVERVPN] opened: \\.\Global\{089C8
607-A347-4A65-A8EE-16FC725600CE}.tap
Mon Nov 14 08:54:15 2011 TAP-Win32 Driver Version 9.8
Mon Nov 14 08:54:15 2011 TAP-Win32 MTU=1500
Mon Nov 14 08:54:15 2011 Notified TAP-Win32 driver to set a DHCP IP/netmask of 1
0.8.0.6/255.255.255.252 on interface {089C8607-A347-4A65-A8EE-16FC725600CE} [DHC
P-serv: 10.8.0.5, lease-time: 31536000]
Mon Nov 14 08:54:15 2011 Successful ARP Flush on interface [3] {089C8607-A347-4A
65-A8EE-16FC725600CE}
Mon Nov 14 08:54:21 2011 TEST ROUTES: 1/1 succeeded len=1 ret=1 a=0 u/d=up
Mon Nov 14 08:54:21 2011 C:\WINDOWS\system32\route.exe ADD 10.8.0.1 MASK 255.255
.255.255 10.8.0.5
Mon Nov 14 08:54:21 2011 Route addition via IPAPI succeeded [adaptive]
Mon Nov 14 08:54:21 2011 Initialization Sequence Completed
But I can not start TightVNC.
What IP address must I use to connect to TightVNC that runs on the OpenVPN server?
Can anyone help please?
Thanks
george
You should be able to use either the VPN server endpoint IP, (looks like 10.8.0.1 from your logs), or to the internal LAN IP.
